DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Eaton Cutler-Hammer 92-01943-02 interface is a PanelMate 92** operator interface. It has an 8.4-inch color TFT flatpanel display with complete VGA resolution and 256 colors or shades.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 92-01943-02. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01943-02 |
Model | 1785K PMPP 1700 |
Display | 8.4-inch color TFT Flat panel display |
Power Voltage | 24 Volts DC |
Power Consumption | 23 Watts |
Electric Current | 1.1 Amperes |
Certifications | CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, D |
Installation Ratings | Type 12, Type 4X, or Type 4 |
Shock | 30G |
Vibration | 1G at 10 to 500 Hertz |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01943-02 |
Model | 1785K PMPP 1700 |
Display | 8.4-inch color TFT Flat panel display |
Power Voltage | 24 Volts DC |
Power Consumption | 23 Watts |
Electric Current | 1.1 Amperes |
Certifications | CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, D |
Installation Ratings | Type 12, Type 4X, or Type 4 |
Shock | 30G |
Vibration | 1G at 10 to 500 Hertz |
The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** interface is designed to operate with a power voltage rating of 24 Volts DC. The unit has a power consumption rating of 23 Watts without a high-speed interface and it is 27 Watts with a high-speed interface installed in the system. It also has an electric current of 1.1 Amps without a high-speed interface and it is 1.3 Amps with a high-speed interface attached. It has a peak inrush current rating up to 5 Amps and optically isolated ports that can withstand power voltages not exceeding 1500 Volts. The unit has agency certifications such as CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, and D certifications. The 92-01943-02 PanelMate 92** interface has an 8.4-inch color TFT flatpanel display with a complete VGA resolution and 256 colors or shades in the graphics.
The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** operator interface is designed for use in Type 12, Type 4X, or Type 4 installations if it is properly mounted in an industrial enclosure. It has 2 RS-422/RS-232 serial ports for printing messages and alarms or communication. For future upgrades, the unit has non-volatile flash memory. The 92-01943-02 PanelMate 92** interface has serial port configuration with DB9S connections for RS-422, RS-232, or RS-485-2 signal levels and a serial port rate between 110 and 38,400 baud. It has a pollution rating of Pollution Degree 1, which is rated for exposure to non-conductive or dry pollutants. It has an operating and non-operating shock of 30 G. It has a maximum vibration rating of 1 G at 10 to 500 Hertz when operating and not operating.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01943-02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01943-02 |
Model | 1785K PMPP 1700 |
Display | 8.4-inch color TFT Flat panel display |
Power Voltage | 24 Volts DC |
Power Consumption | 23 Watts |
Electric Current | 1.1 Amperes |
Certifications | CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, D |
Installation Ratings | Type 12, Type 4X, or Type 4 |
Shock | 30G |
Vibration | 1G at 10 to 500 Hertz |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01943-02 |
Model | 1785K PMPP 1700 |
Display | 8.4-inch color TFT Flat panel display |
Power Voltage | 24 Volts DC |
Power Consumption | 23 Watts |
Electric Current | 1.1 Amperes |
Certifications | CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, D |
Installation Ratings | Type 12, Type 4X, or Type 4 |
Shock | 30G |
Vibration | 1G at 10 to 500 Hertz |
The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** interface is designed to operate with a power voltage rating of 24 Volts DC. The unit has a power consumption rating of 23 Watts without a high-speed interface and it is 27 Watts with a high-speed interface installed in the system. It also has an electric current of 1.1 Amps without a high-speed interface and it is 1.3 Amps with a high-speed interface attached. It has a peak inrush current rating up to 5 Amps and optically isolated ports that can withstand power voltages not exceeding 1500 Volts. The unit has agency certifications such as CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, and D certifications. The 92-01943-02 PanelMate 92** interface has an 8.4-inch color TFT flatpanel display with a complete VGA resolution and 256 colors or shades in the graphics.
The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** operator interface is designed for use in Type 12, Type 4X, or Type 4 installations if it is properly mounted in an industrial enclosure. It has 2 RS-422/RS-232 serial ports for printing messages and alarms or communication. For future upgrades, the unit has non-volatile flash memory. The 92-01943-02 PanelMate 92** interface has serial port configuration with DB9S connections for RS-422, RS-232, or RS-485-2 signal levels and a serial port rate between 110 and 38,400 baud. It has a pollution rating of Pollution Degree 1, which is rated for exposure to non-conductive or dry pollutants. It has an operating and non-operating shock of 30 G. It has a maximum vibration rating of 1 G at 10 to 500 Hertz when operating and not operating.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01943-02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01943-02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.