DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1204-RWC-17-A module is a reflective wave reduction device. It has a variable voltage rating of 380 to 480 Volts with 17.5 Amps of current and it has 12 Amps of current for a voltage range of 575 to 600 Volts AC.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1204-RWC-17-A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1204 Reflected Wave Reduction Devices |
Part Number | 1204-RWC-17-A |
Description | Reflective wave reduction device |
Enclosure rating | IP 20 |
Carrier | 2 kHz |
Current | 12/17.5 Amperes |
Voltage | 380-480, 575-600 Volts AC |
Temperature | 0-50 degrees Celsius |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1204 Reflected Wave Reduction Devices |
Part Number | 1204-RWC-17-A |
Description | Reflective wave reduction device |
Enclosure rating | IP 20 |
Carrier | 2 kHz |
Current | 12/17.5 Amperes |
Voltage | 380-480, 575-600 Volts AC |
Temperature | 0-50 degrees Celsius |
The 1204-RWC-17-A module is a reflective wave reduction device. It has been manufactured by Allen-Bradley. It has a book-style design. It has a current rating of 17.5 Amps for a voltage rating between 380 and 480 Volts AC and a current rating of 12 Amps for 575 to 600 Volts AC voltage. It uses an IP 20 enclosure to house the internal parts. It is available with a common mode choke feature. It is recommended for a 2 kHz carrier. It can be panel-mounted into the system cabinet. It can be vertically mounted if it comes with a Type 1 enclosure and it can be horizontally mounted if it comes with an open type of enclosure. It is fully certified with the KC standard.
The 1204-RWC-17-A module has been designed to fit the 1336 family of AC drives with the compatible current ratings. The device can only be operated within a temperature range of 0 to 50 degrees Celsius. The environment should have 5 to 95% non-condensing humidity. The installation atmosphere should not contain hazardous dust, vapor, or liquids. No traces of electromagnetic noise should be present in the installation environment. The reflective wave device can be operated at up to an altitude of 1000 meters without getting derated. The 1204-RWC-17-A module is used to reduce potentially destructive reflected wave spikes that occur with long motor leads. It can be used as a safety device in modern industries. The device should be properly earthed during the installation process. The 1204-RWC-17-A module reduces the harmful effects of the common-mode noise that is present in the 1336 drives.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1204-RWC-17-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1204 Reflected Wave Reduction Devices |
Part Number | 1204-RWC-17-A |
Description | Reflective wave reduction device |
Enclosure rating | IP 20 |
Carrier | 2 kHz |
Current | 12/17.5 Amperes |
Voltage | 380-480, 575-600 Volts AC |
Temperature | 0-50 degrees Celsius |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1204 Reflected Wave Reduction Devices |
Part Number | 1204-RWC-17-A |
Description | Reflective wave reduction device |
Enclosure rating | IP 20 |
Carrier | 2 kHz |
Current | 12/17.5 Amperes |
Voltage | 380-480, 575-600 Volts AC |
Temperature | 0-50 degrees Celsius |
The 1204-RWC-17-A module is a reflective wave reduction device. It has been manufactured by Allen-Bradley. It has a book-style design. It has a current rating of 17.5 Amps for a voltage rating between 380 and 480 Volts AC and a current rating of 12 Amps for 575 to 600 Volts AC voltage. It uses an IP 20 enclosure to house the internal parts. It is available with a common mode choke feature. It is recommended for a 2 kHz carrier. It can be panel-mounted into the system cabinet. It can be vertically mounted if it comes with a Type 1 enclosure and it can be horizontally mounted if it comes with an open type of enclosure. It is fully certified with the KC standard.
The 1204-RWC-17-A module has been designed to fit the 1336 family of AC drives with the compatible current ratings. The device can only be operated within a temperature range of 0 to 50 degrees Celsius. The environment should have 5 to 95% non-condensing humidity. The installation atmosphere should not contain hazardous dust, vapor, or liquids. No traces of electromagnetic noise should be present in the installation environment. The reflective wave device can be operated at up to an altitude of 1000 meters without getting derated. The 1204-RWC-17-A module is used to reduce potentially destructive reflected wave spikes that occur with long motor leads. It can be used as a safety device in modern industries. The device should be properly earthed during the installation process. The 1204-RWC-17-A module reduces the harmful effects of the common-mode noise that is present in the 1336 drives.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1204-RWC-17-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1204-RWC-17-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.