Eaton Cutler-Hammer

The SVX 9000 Drives from Eaton Cutler-Hammer are known for their high performance and sophisticated features. They are adjustable frequency drives that use the sensorless vector control technology for the regulation and control of the torque and speed of different electric motors. The SVX 9000 Series Drives are suitable for both multiple motor drive systems and high-speed applications. The 9000 Series Drives are rated for heavy-duty performance and they can meet different application requirements. The SVX 9000 Drives can be operated at a temperature range between -10 and 50 degrees Celsius without getting derated. They fit into the IP 21 and IP 54 NEMA rated enclosures. They come with a 500,000-hour MTBF rating. All of the drives rated from FR4 through FR9 come with integrated 3% line reactors as standard options. The front part of the drives have human-machine interface modules that are easy-to-use and they help in overall control operation. The SVX 9000 Drives come with 5 slots for I/O expansion and they also support plugin modules. They support optional Fieldbus connections which include the DeviceNet, LonWorks, and PROFIBUS-DP networks. They feature PID control and power factor correction for 1 to f5 pumps. The SVX 9000 Drives come with internal braking choppers at up to the FR9 frames. The servo motor drives use the Volts per Hertz control with boost and slip compensation features. The SVX series drives are equipped with protective features, including the overcurrent, overvoltage, undervoltage, earth fault, over temperature, motor overload, motor stall, and the motor underload protection. The drives are also protected against short circuits. The SVX 9000 Drives should be installed in a location without any heat-generating devices nearby.

Series C Circuit Breakers from Eaton Cutler-Hammer provide electrical protection to switchboards, panel boards, busway devices, and motor control centers. Trip units available in this series include electronic, thermal-magnetic, and magnetic-only trip units. Series C Circuit Breakers can support maximum system current ratings of 800A, maximum AC system voltage ratings of 600V AC, and maximum DC system voltage ratings of 250V DC. The contacts in these circuit breakers support high-speed "blow open" actions. Various external accessories are available for the Series C Circuit Breakers.

The PanelMate 92\*\* operator interface modules by Eaton Cutler-Hammer feature units from the PanelMate 500, 1000, 1500, 2000, 3000 and 4000 product series. The standard PanelMate operator unit has an LCD with a resolution of 640 x 480 pixels and an operating temperature of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit). These terminals operate within 20 to 95% relative humidity and their frames can have a protection rating from NEMA 4 to NEMA 12. The power requirements include a voltage of 120 to 230 Volts AC and power consumption of 30 to 80 Watts. The operating frequency of the unit is 50 to 60 Hertz and it has an auto-adjustable auto-sensing power source. These operator interface modules support touchscreen input and they feature a dynamic RAM with a capacity of 1 to 3 megabytes. Also, the PanelMate 92\*\* terminals have a flash memory of 1 megabyte for storing programs, messages, and fonts. The included real-time clock comes with an internal lithium battery and a non-volatile memory. These terminals use Motorola microprocessors and they are compatible with PLC units from various manufacturers. The users can take full advantage of the Power Pro software that is used for communication with these devices. The PanelMate 92\*\* operator interfaces are vital parts of PanelMate systems that also include configuration software and optional hardware components. The PanelMate units are flexible and cost-effective replacements for traditional operator control panels. The simple and intuitive PanelMate 92\*\* units have fewer buttons than other interfaces and they do not have any unnecessary indicators. These modules provide better control, minimize installation time, and reduce costs for hardwiring. The PanelMate technology also provides advantages in regard to the diagnostics, troubleshooting, and the setting of alarms. These operator interface display terminals provide great visualization of processes conducted in the high-demanding industrial environments. The PanelMate 92\*\* terminals are designed for integration with any system that is controlled by programmable logic controllers (PLCs).

Eaton Cutler-Hammer PanelMate Power Pro devices are operator stations or operator terminals that allow operators to monitor and control industrial machines. The PanelMate Power Pro operator stations are adaptable for a wide range of control applications. These operator stations are compatible with hundreds of different PLCs, and they can communicate with multiple PLCs simultaneously and directly. The PanelMate Power Pro operator stations are available with different display sizes and with touchscreens or keypads for input.

The Eaton S801 Soft Starters are designed with space-saving features that make them among the most compact and smallest soft starters in the market. Therefore, the S801 Soft Starters can perfectly fit into existing Wye-Delta starters systems, soft starter designs, or across-the-line contactors. With such features, the S801 Soft Starters reduce costs since they can fit in existing mounting structures and this eliminates the need to provide new structures to house these soft starters. This line of soft starters features reduced voltage. The Eaton S801 Soft Starters are easy to mount, install, and program. Additionally, this series of soft starters are multifunctional and they are designed to be interfaced with 3-phase motors to control the motors’ acceleration and deceleration. These soft starters are available in various current ratings. However, this family of soft starters accommodates applications with a current rating ranging from a minimum of 11 Amps to a maximum of 1000 Amps. The S801 Soft Starters function with all industrial motors with ratings of anywhere from fractional Horsepower to 1000 Amps of steady-state current. For mounting, the S801 Soft Starters can be mounted in the motors in enclosed control applications or in the motor control centers. The S801 Soft Starters provide protection against overloads. Additionally, the built-in overload is capable of offering additional protective functionalities to give improved motor protection. Note that the Eaton S801 Soft Starters are the best choice for pump control applications. This is because this series of soft starters provide a smooth transition for stopping motors, thus eliminating the “water hammer” effect that is capable of damaging pumps, valves, and pipes. The S801 Soft Starters have overtemperature protection which makes the starters shut down when the temperature reaches 100 degrees Celsius. Other functionalities available with the S801 Soft Starters include stall detection, jam detection, phase loss protection, phase reversal, kick start, and ramp start functions. The kick start provides a current kick of over 550% of the full load current to start the starters and the motors they control.

The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.

The Eaton Cutler-Hammer PowerXL DG1 drives are general-purpose variable frequency drives (VFDs). These drives are designed for demanding general-purpose industrial applications. The PowerXL DG1 drives have input/output voltage ratings of 230V, 400V, and 600V, and they operate with 3-phase AC voltage. Some of the drives have internal brake choppers, and different drive models are available with different EMC filter options. The PowerXL DG1 drives' EMC filter options include a DC choke, an EMC filter, an EMC filter and a DC choke, or no filter or choke.

The S811+ Soft Starters are enclosure-mounted electrical devices that are designed and manufactured by Eaton Cutler-Hammer. They have been specially manufactured to be used with other motors as soft-starting devices. They can easily work with 3-phase supplies. They are equipped with 6 SCRs which are connected to each other by using a full-wave power bridge. The variation in the SCR conduction controls the voltage applied to the motor. Finally, the torque is controlled by using the generated voltage from the motor. The S811+ Soft Starters follow the common industry protocol and they come with different communication capabilities. They come with the Modbus communication protocol. The front parts of the started devices house a digital interface module which is used by the operators to configure and troubleshoot the starter devices. The modules are equipped with keypads with different navigational and control keys. The detachable 12-pin locking control terminal block is located on the bottom part of the front side. The starters meet different standards and certifications, including the UL, CSA, IEC, and CCC standards. The starter device meets the specifications set by NEMA, ICS, etc. The Eaton Cutler-Hammer S811+ Soft Starters are equipped with electronic motor overload protection features. These features help to protect the motors and the power wiring against overheating due to excessive current for a long time. The starters are available in different frame sizes, current ratings, power output ratings, maximum current carrying capacities, operating frequencies. The S811+ Soft Starters can be operated at up to an altitude of 2000 meters above sea level. These starters are resistant to a shock of 15 G maximum from all directions and they are vibration-resistant to vibrations of up to 3 G from all directions.

Eaton Series G circuit breakers are molded case circuit breakers that support high-speed "blow-open" actions and have compact designs. Series G circuit breakers are available with electronic or thermal-magnetic trip units. They are also available with current ratings from 15 to 2500 Amps and voltage ratings of up to 690 Volts AC. Most Series G circuit breakers have 3 or 4 poles, and different breaker models are available with different neutral options. Some Series G circuit breakers support metric mounting hardware, and some support imperial mounting hardware. Earth leakage modules are also available in the Series G product line.