Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1321 Power Products 1321-RWR35-DP

Product image is representative; revision or series may vary. Contact us to request a specific version.

1321-RWR35-DP

|
Need a Specific Revision?

The Allen-Bradley 1321-RWR35-DP Reflective Wave Reduction Device comes with a panel mounted open type enclosure. Its operating input voltage is 400 to 480 Voltage AC. The current rating is 35 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1321-RWR35-DP

ManufacturerAllen Bradley
Product TypeReflective Wave Reduction Device
Product Line1321 Power Products
Part Number1321-RWR35-DP
UPC820919873669
Weight20.00 lbs (9.07 kg)
Input Voltage400 to 480V AC
EnclosureOpen Type (IP00), Panel Mounted
Phases3
Amperage Rating35 A
Frequency Rating50/60 Hz
Heat Dissipation414 W
Request a Repair

The 1321-RWR35-DP module is a reflective wave reduction device from Allen-Bradley. It comes with an open type (IP 00) enclosure and an integral mounted, finger guard (IP 20) terminal block. This reflective wave filter operates with an input voltage of 400 to 480 Volts AC. Its fundamental amperage rating is 35 Amps. It has 414 Watts of heat dissipation. The maximum ambient temperature for the 1321-RWR35-DP reflective filter module is 45 degrees Celsius. It has a Class H (180 degrees Celsius or better) insulation system. Its approximate weight is 8.8 kilograms. The recommended drive carrier frequency for optimal 1321-RWR35-DP RWR module performance is 2 kHz.

In long motor lead applications, locating the 1321-RWR35-DP module between the drive and motor helps to reduce DV/DT and motor terminal peak voltage. Allen-Bradley RWR devices can help protect motors from fast DV/DT rise times that increase the motor insulation heat while reducing motor life over time. These reflective wave filters provide a simple solution by protecting motors from premature failures due to reflected wave impulses. It also helps to reduce voltage spikes, especially in long cable leads, and surge currents that are caused by rapid changes in the load. The most effective way to avoid reflected waves is to keep cable lengths shorter than the manufacturer’s recommended maximum length. When there is an application with a long drive to motor lead length, one of the best hardware solutions is to use a reflective wave filter that eliminates or reduces reflected waves. It also helps to extend semiconductor life and reduce audible motor noise. This device can be mounted on a panel while maintaining the minimum clearance for proper heat dissipation.