Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1333 AC Drives 1331-AAF10

1331-AAF10

|

The Allen-Bradley 1331-AAF10 drive is an analog Variable Frequency Drive (VFD) with an IP 20 NEMA Type 1 enclosure that is designed to be installed in a protected panel board and provided with a single-phase power supply for an input voltage rating of 208, 220, or 240 Volts AC, at 50 to 60 Hertz. It uses precision, military-grade variable resistors or potentiometers to manually set the operation parameters and it only needs to be supplied with run/stop control, forward/reverse control, and speed control for commissioning purposes.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 1331-AAF10

BrandAllen-Bradley / Rockwell Automation
Series1333 AC Drives
Part Number1331-AAF10
Bulletin Number1331
EnclosureNEMA type 1 (IP20)
Input Voltage Rating 208/220/240V AC
Input Phases1 PH
Input Frequency50/60 Hz
RMS Output4.2 Amperes
Operating Temperature0 to 40 degrees Celsius
Relative Humidity5% to 95% Non Condensing
Rectifier TypeFull Wave Bridge
Output VoltageZero to Rated Voltage
Output Phases3 PH
Continuous Current100% of Rated Output Amps
Over Current Trip200% of Rated Input Current
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1331-AAF10 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1331-AAF10 units instead of migration.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1331-AAF10 drive is an analog Variable Frequency Drive (VFD) with an IP 20 NEMA Type 1 enclosure that is designed to be installed in a protected panel board and provided with a single-phase power supply for an input voltage rating of 208, 220, or 240 AC, at 50 to 60 Hertz frequency. It is capable of producing a Pulse Width Modulated output frequency ranging from 0.37 to 1.5 kilowatts at 230 Volts AC, using Darlington power transistors as the switching devices and a completely analog configuration board with precision potentiometers and/or DIP switch selections to choose between several types of user-defined features. The current rating of the Allen-Bradley 1331-AAF10 drive is 4.2 Amps of RMS output current, at 0.75 kilowatts (1 Horsepower) of nominal output power.

There are also Dipswitch-selectable parameters for choosing between the different available output frequency ranges, from 0 to 50 Hertz, 0 to 60 Hertz, 0 to 100 Hertz, or 0 to 120 Hertz. Commissioning the Allen Bradley 1331-AAF10 drive is simple because the only control inputs needed are the run/stop control (from the local panel or user-supplied), the forward/reverse control (from the local panel or user-supplied), and the speed control (from a user-supplied potentiometer, a potentiometer in the local panel, or a 0 to 10 Volts DC external voltage source). The installation and wiring of the Allen Bradley 1331-AAA AC drive should be performed by a qualified electrician, and it consists of connecting the appropriate wires in a properly marked terminal block with 6 identified connection ports for the incoming power wiring, motor leads, and protective grounding,