Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1333 AC Drives 1333-BAN

Product image is representative; revision or series may vary. Contact us to request a specific version.

1333-BAN

|
Need a Specific Revision?

The Allen-Bradley 1333-BAN drive is an adjustable frequency AC drive that operates with 3 Horsepower or 2.2 kilowatts of output power and a 380, 415, or 460 Volts AC input voltage. The 1333-BAN drive has an IP 20 NEMA Type 1 enclosure and 50 to 60 Hertz frequency.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1333-BAN

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1333 AC Drives
Part Number1333-BAN
Weight18.50 lbs (8.39 kg)
Voltage380/415/460 Volts AC
Amps In8.0 Amperes
Amps Out6.0 Amperes
Frequency50/60 Hertz
Bulletin1333
Hp Rating3 Horsepower
kW2.2 Kilowatts
EnclosureIP20 NEMA Type 1
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1333-BAN has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1333-BAN units instead of migration.

Request a Repair

The 1333-BAN drive is an adjustable frequency AC drive manufactured by Allen-Bradley/Rockwell Automation. This is a 3-phase drive with an input voltage of 380, 415, and 460 Volts AC, producing 5.3 kVA, 5.8 kVA, and 6.4 kVA, respectively, and the output kVA is 3.9, 4.3, and 4.8 kVA at 380, 415 and 460 Volts AC, respectively. The 1333-BAN drive also features a Horsepower rating of 3 Horsepower at 2.2 kilowatts and a frequency range of 50 to 60 Hertz. Other specifications of this drive include an input current of 8.0 Amps as well as an output current of 6.0 Amps. It also has a total heat dissipation rating of 250 Watts at 853 BTU per hour. The operators of this drive must ensure that these 4 control inputs are present; the Start, Stop, Speed Reference, and the Auxiliary Interlock input, for the drive to operate correctly.

The Allen-Bradley 1333-BAN drive allows for connections via the 8-point terminal block that is placed beneath the main control board. The users are advised to disconnect the unit from the power supply as well as any other motor that may be connected to prevent harmful effects during the installation of the 1333-BAN adjustable frequency drive. This drive must be handled by qualified technicians only. This drive features a display as well as LED indicators that enhance troubleshooting and monitoring. The LCD displays error codes that enable smooth and seamless troubleshooting of this drive or of the motor connected to this drive. The NEC guidelines require that the motor overload protection be included within the motor branch circuit.