1336-142695 | Allen Bradley Drives 1336 Adjustable

1336-142695

Rated 4.4 with 4 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-142695

Revisions: Ser A 
Description: The Allen-Bradley 1336-142695 DC Bus Capacitor Kit is a BUS capacitor replacement kit for the Allen-Bradley 1336 Classic Drives with power ratings from 29.9 KVA to 34.9 KVA. This capacitor (C1 to C10) assembly is located on the drive’s main chassis, and it is suitable for 1336 drives with an operating voltage range from 500 to 600 Volts AC, and with an output current range from 30 to 35 Amps, and an input current range of 24 to 29 Amps. read more...
Available Now
Request a quote for 1336-142695

Description: The Allen-Bradley 1336-142695 DC Bus Capacitor Kit is a BUS capacitor replacement kit for the Allen-Bradley 1336 Classic Drives with power ratings from 29.9 KVA to 34.9 KVA. This capacitor (C1 to C10) assembly is located on the drive’s main chassis, and it is suitable for 1336 drives with an operating voltage range from 500 to 600 Volts AC, and with an output current range from 30 to 35 Amps, and an input current range of 24 to 29 Amps. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-142695.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 4 reviews

    Technical Specifications for 1336-142695

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-142695
DescriptionBus Capacitor
Rating CodeC025-C030
Quantity Used6
Kit NumberSP-142695
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-142695 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-142695 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-142695
DescriptionBus Capacitor
Rating CodeC025-C030
Quantity Used6
Kit NumberSP-142695
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-142695 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-142695 units instead of migration.

s

About 1336-142695

The Allen-Bradley 1336-142695 DC Bus Capacitor Kit is a BUS capacitor replacement kit for the Allen-Bradley 1336 Classic Drives with power ratings from 29.9 KVA to 34.9 KVA. This capacitor (C1 to C10) assembly is located on the drive’s main chassis, and it is suitable for 1336 drives with an operating voltage range from 500 to 600 Volts AC, and with an output current range from 30 to 35 Amps, and an input current range of 24 to 29 Amps. The number of capacitors varies across drives, and the 1336-142695 DC Bus Capacitor is installed on the drive’s chassis via the following steps.



(1) Attach the 1336-142695 Bus capacitor to the Bus capacitor bar, using 8 supplied fastening nuts. (2) Fasten the Busbar capacitor with the connected Bus capacitor to the power module Bus using 18 supplied fastening nuts. (3) Fasten the power module Busbar with the BUS capacitor bar using 6 fastening screws. (4) Attach the whole setup (power module BUS bars with Bus capacitor bar) to the power module snubber resistor using 3 fastening screws, and also attach to the Bus capacitor inverter standoffs using 2 supplied fastening bolts. (5) Also, attach the converter fuse support to the Bus capacitor bar using 4 fastening bolts, and connect the two power cables to the top and bottom of the Bus capacitor bank. The 1336-142695 DC Bus Capacitor is tested using a test meter with the negative lead end connected to the –DC break terminal (TB1), and the positive lead end to the +DC break terminal. Power is applied, and the meter reading is compared with standard table readings.



Technical Description of 1336-142695

Allen-Bradley Bus Capacitor with a C025-C030 rating code and 6 per Drive

Repair Services for 1336-142695

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-142695. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-142695

Please refer to the manual for more information about the 1336-142695 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-142695 Ser A
1336-142695/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-142695
  • 1336-l42695
  • 1336-1A2695
  • 1336142695

Dimensions For 1336-142695

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-142695

Resolutions For 1336-142695

About

Technical Specifications for 1336-142695

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-142695
DescriptionBus Capacitor
Rating CodeC025-C030
Quantity Used6
Kit NumberSP-142695
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-142695
DescriptionBus Capacitor
Rating CodeC025-C030
Quantity Used6
Kit NumberSP-142695
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-142695 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-142695 units instead of migration.

About 1336-142695

The Allen-Bradley 1336-142695 DC Bus Capacitor Kit is a BUS capacitor replacement kit for the Allen-Bradley 1336 Classic Drives with power ratings from 29.9 KVA to 34.9 KVA. This capacitor (C1 to C10) assembly is located on the drive’s main chassis, and it is suitable for 1336 drives with an operating voltage range from 500 to 600 Volts AC, and with an output current range from 30 to 35 Amps, and an input current range of 24 to 29 Amps. The number of capacitors varies across drives, and the 1336-142695 DC Bus Capacitor is installed on the drive’s chassis via the following steps.



(1) Attach the 1336-142695 Bus capacitor to the Bus capacitor bar, using 8 supplied fastening nuts. (2) Fasten the Busbar capacitor with the connected Bus capacitor to the power module Bus using 18 supplied fastening nuts. (3) Fasten the power module Busbar with the BUS capacitor bar using 6 fastening screws. (4) Attach the whole setup (power module BUS bars with Bus capacitor bar) to the power module snubber resistor using 3 fastening screws, and also attach to the Bus capacitor inverter standoffs using 2 supplied fastening bolts. (5) Also, attach the converter fuse support to the Bus capacitor bar using 4 fastening bolts, and connect the two power cables to the top and bottom of the Bus capacitor bank. The 1336-142695 DC Bus Capacitor is tested using a test meter with the negative lead end connected to the –DC break terminal (TB1), and the positive lead end to the +DC break terminal. Power is applied, and the meter reading is compared with standard table readings.



Technical Description of 1336-142695

Allen-Bradley Bus Capacitor with a C025-C030 rating code and 6 per Drive
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-142695. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-142695. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-142695 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-142695 Ser A
1336-142695/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-142695
  • 1336-l42695
  • 1336-1A2695
  • 1336142695
PDF