1336-BD-SP10A | Allen Bradley Drives 1336 Adjustable

1336-BD-SP10A

Rated 4.7 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-BD-SP10A

Revisions: Ser A 
Description: The Allen-Bradley 1336-BD-SP10A service kit is a specialized kit designed for the replacement of several different converter diodes that are located in the converter bays of H-Frame 1336 or 1336 PLUS II Multipulse drives which are part of the Allen-Bradley series of 1336 IMPACT drives. While the kit is not packed with the thermal compound that is required to install new diodes, it comes with a replacement converter diode with specific replacement instructions that must be fully adhered to by qualified personnel. The application of the 1336-BD-SP10A calls for the careful location of the converter diodes in the heat sink assembly of the IMPACT drive’s multipulse bridge. When replacing the diode, care should be taken in ensuring that all power connections are disconnected first to avoid risks, which can include death. read more...
Available Now
Request a quote for 1336-BD-SP10A

Description: The Allen-Bradley 1336-BD-SP10A service kit is a specialized kit designed for the replacement of several different converter diodes that are located in the converter bays of H-Frame 1336 or 1336 PLUS II Multipulse drives which are part of the Allen-Bradley series of 1336 IMPACT drives. While the kit is not packed with the thermal compound that is required to install new diodes, it comes with a replacement converter diode with specific replacement instructions that must be fully adhered to by qualified personnel. The application of the 1336-BD-SP10A calls for the careful location of the converter diodes in the heat sink assembly of the IMPACT drive’s multipulse bridge. When replacing the diode, care should be taken in ensuring that all power connections are disconnected first to avoid risks, which can include death. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-BD-SP10A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 7 reviews

    Technical Specifications for 1336-BD-SP10A

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BD-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BD-SP10A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BD-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BD-SP10A units instead of migration.

s

About 1336-BD-SP10A

The Allen-Bradley 1336-BD-SP10A service kit is a specialized kit designed for the replacement of several different converter diodes that are located in the converter bays of H-Frame 1336 or 1336 PLUS II Multipulse drives which are part of the Allen-Bradley series of 1336 IMPACT drives. While the kit is not packed with the thermal compound that is required to install new diodes, it comes with a replacement converter diode with specific replacement instructions that must be fully adhered to by qualified personnel. The application of the 1336-BD-SP10A calls for the careful location of the converter diodes in the heat sink assembly of the IMPACT drive’s multipulse bridge. When replacing the diode, care should be taken in ensuring that all power connections are disconnected first to avoid risks, which can include death. Another important precaution is to ensure that before any converter replacement is done during drive maintenance, the Bus voltage has to be discharged to zero.





The vendor part number for the diodes that come with the 1336-BD-SP10A is ND17N16K and these diodes are highly robust, single rectifier POWERBLOCK 13-millimeter fast diode modules which are not only designed and assembled with the desired pressure contacts, but they also come with separate copper base plates. The 1336E-BD-SP10A kit guarantees easy replacement of converter diodes that have highly stable pressure contacts and adequately insulated baseplates with extremely low chances of failure, making the 1336-BD-SP10A an ideal replacement kit for 1336-series IMPACT drives. The 1336-BD-S10A, due to its UL-recognized diodes, ensures that there are no failures linked to insulation, and it is further designed to facilitate the mounting process of the diodes, and it has failure-safe technology for a stable and efficient IMPACT drive’s operation.



Technical Description of 1336-BD-SP10A

Allen Bradley-DIODE REPLACEMENT KIT Adjustable Frequency Drive

Repair Services for 1336-BD-SP10A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BD-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-BD-SP10A

Please refer to the manual for more information about the 1336-BD-SP10A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-BD-SP10A Ser A
1336-BD-SP10A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-BD-SP10A
  • 1336-8D-SP10A
  • 1336-BD-SPl0A
  • 1336-BD-SP1oA
  • 1336BDSP10A

Dimensions For 1336-BD-SP10A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-BD-SP10A

Resolutions For 1336-BD-SP10A

About

Technical Specifications for 1336-BD-SP10A

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BD-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BD-SP10A units instead of migration.

About 1336-BD-SP10A

The Allen-Bradley 1336-BD-SP10A service kit is a specialized kit designed for the replacement of several different converter diodes that are located in the converter bays of H-Frame 1336 or 1336 PLUS II Multipulse drives which are part of the Allen-Bradley series of 1336 IMPACT drives. While the kit is not packed with the thermal compound that is required to install new diodes, it comes with a replacement converter diode with specific replacement instructions that must be fully adhered to by qualified personnel. The application of the 1336-BD-SP10A calls for the careful location of the converter diodes in the heat sink assembly of the IMPACT drive’s multipulse bridge. When replacing the diode, care should be taken in ensuring that all power connections are disconnected first to avoid risks, which can include death. Another important precaution is to ensure that before any converter replacement is done during drive maintenance, the Bus voltage has to be discharged to zero.





The vendor part number for the diodes that come with the 1336-BD-SP10A is ND17N16K and these diodes are highly robust, single rectifier POWERBLOCK 13-millimeter fast diode modules which are not only designed and assembled with the desired pressure contacts, but they also come with separate copper base plates. The 1336E-BD-SP10A kit guarantees easy replacement of converter diodes that have highly stable pressure contacts and adequately insulated baseplates with extremely low chances of failure, making the 1336-BD-SP10A an ideal replacement kit for 1336-series IMPACT drives. The 1336-BD-S10A, due to its UL-recognized diodes, ensures that there are no failures linked to insulation, and it is further designed to facilitate the mounting process of the diodes, and it has failure-safe technology for a stable and efficient IMPACT drive’s operation.



Technical Description of 1336-BD-SP10A

Allen Bradley-DIODE REPLACEMENT KIT Adjustable Frequency Drive
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BD-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BD-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-BD-SP10A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-BD-SP10A Ser A
1336-BD-SP10A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-BD-SP10A
  • 1336-8D-SP10A
  • 1336-BD-SPl0A
  • 1336-BD-SP1oA
  • 1336BDSP10A
PDF