DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDBMX3-SP4D. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDBMX3-SP4D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDBMX3-SP4D units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDBMX3-SP4D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDBMX3-SP4D units instead of migration.
sThe 1336-BDBMX3-SP4D is a gate driver board for 20 Horsepower-rated AC drives. It is manufactured by Allen-Bradley and it can be used only with 1336 series drives that operate with 460 Volts AC, 3-phase, at 50 to 60 Hertz. Drives with 20 Horsepower ratings have the “B” frame size. There is only one gate driver PCB installed on each Bulletin 1336 AC drive. This is an important part of the drive that has a role in amplifying a low current input signal received from the main control board. The 1336-BDBMX3-SP4D PCB is positioned right below the main control board, and like all other boards of this type from the 1336 drive family, it has 6 terminals designated with J2, J7, J8, J9, J10, and J13. These connectors, along with the TB4, TB6, and TB7 terminal base connectors, are used to receive control power, to receive and transmit digital signals, and to communicate with other AC drive elements.
Be sure to test fuses F1 and F3 on the gate driver board for open conditions before replacing this part, because open fuses could be causing the board’s malfunction. Before conducting the replacement of the 1336-BDBMX3-SP4D PCB, the operators should disconnect the power from the drive and, after waiting a few minutes, they should check that there is no voltage between the +DC and the –DC brake terminals. This board is fastened to the mounting plate with 8 fastening screws which must be removed for the users to be able to install a new gate driver board. The 1336-BDBMX3-SP4D has the operating temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDBMX3-SP4D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDBMX3-SP4D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDBMX3-SP4D Ser A
|
1336-BDBMX3-SP4D/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDBMX3-SP4D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDBMX3-SP4D units instead of migration.
The 1336-BDBMX3-SP4D is a gate driver board for 20 Horsepower-rated AC drives. It is manufactured by Allen-Bradley and it can be used only with 1336 series drives that operate with 460 Volts AC, 3-phase, at 50 to 60 Hertz. Drives with 20 Horsepower ratings have the “B” frame size. There is only one gate driver PCB installed on each Bulletin 1336 AC drive. This is an important part of the drive that has a role in amplifying a low current input signal received from the main control board. The 1336-BDBMX3-SP4D PCB is positioned right below the main control board, and like all other boards of this type from the 1336 drive family, it has 6 terminals designated with J2, J7, J8, J9, J10, and J13. These connectors, along with the TB4, TB6, and TB7 terminal base connectors, are used to receive control power, to receive and transmit digital signals, and to communicate with other AC drive elements.
Be sure to test fuses F1 and F3 on the gate driver board for open conditions before replacing this part, because open fuses could be causing the board’s malfunction. Before conducting the replacement of the 1336-BDBMX3-SP4D PCB, the operators should disconnect the power from the drive and, after waiting a few minutes, they should check that there is no voltage between the +DC and the –DC brake terminals. This board is fastened to the mounting plate with 8 fastening screws which must be removed for the users to be able to install a new gate driver board. The 1336-BDBMX3-SP4D has the operating temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDBMX3-SP4D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDBMX3-SP4D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDBMX3-SP4D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDBMX3-SP4D Ser A
|
1336-BDBMX3-SP4D/A, Series A, Rev A | Request Quote |