The 1336-CONV-SP13A is an appropriate adjustable frequency drive that is suitable for smaller facilities that depend on devices suitable for providing an automation to the overall operations executed within the facility. This device has several adjustable features and is delivered to the facility as a complete kit, providing all of the additional accessories that will be required during the installation, programming, initial configuration, and mounting of the adjustable frequency drive. This device is a highly configurable device, ensuring that facility can utilize it with a number of different compatible hardware settings and motors and ultimately deliver better value for the money spent on the automation features implemented to provide a boost in the productivity within the facility’s internal environment. The 1336-CONV-SP13A offers variable output settings that ensure the facility in which the device is installed can utilize this drive with a number of different motors that may already be installed within the facility. The device has an input power requirement of 230 Volts AC; this input power requirement ensures that adequate power can be delivered to the adjustable frequency drive, while also providing a more cost-effective and energy-sufficient solution for the facility that will be taking advantage of the automation features that are offered by this drive.

The output settings of the 1336-CONV-SP13A can be set according to the compatibility of the attached motor. The adjustable frequency drive can deliver an output power of up to 15 Horsepower. These output power features make this adjustable frequency drive appropriate for many smaller facilities that highly depend on the functionality produced by the motor, as well as depends on the overall automation featured provided by devices such as drives and motor controllers. This drive comes with an internal programming module that enables the operators and the individuals involved with the initial installation and setup of the device to configure the device based upon the particular needs of the hardware that will be connected to the device in the facility where it will be used. Configuration can be performed on the device by utilizing its built-in LCD display module, along with the added keypad that enables the operator to provide input to different settings that can be configured on the device.