DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-CONV-SP14A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CONV-SP14A |
Description | AC Drive DC Bus Fuse Replacement |
Fuse Rating | 200 Amps |
Frame Type | D Frame |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONV-SP14A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONV-SP14A units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CONV-SP14A |
Description | AC Drive DC Bus Fuse Replacement |
Fuse Rating | 200 Amps |
Frame Type | D Frame |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONV-SP14A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONV-SP14A units instead of migration.
sThe Allen Bradley 1336-CONV-SP14A DC BUS Fuse Replacement Kit is a DC fuse and Diode replacement kit for the 1336 Plus, Force, and Impact AC Digital drives with a 200A current rating, a 460 Volt AC voltage rating, and a 60 Horsepower output power rating. This fuse is located on the drive’s main chassis just between the drive’s power supply board and the main control board mounting plate; the fuse provides circuit protection from line surges. The 1336-CONV-SP14A fuse kit contains 200A rated Class CC fuse, which provides a drive’s designated short-circuit ratings. This module is installed on the drives main chassis via the following installation steps. Firstly, disconnect power from the drive, and check for zero Volts at the drive’s Terminal base (TB1) +DC and –DC Terminals. Attach the 200A Fuse from the DC BUS Fuse kit to fuse block bolt, and also attach the Diode (D2 supplied Diode) to the fuse block bolt. Fasten the fuse plus the supplied Diode to the fuse block using tighten the bolt with 11.0 to 12.5 N-m tightening torque. The base driver board, power supply board, and the main control board mounting plate is inserted into the drive. The drive is turned and check for installation status via LED light indicators on the drive.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONV-SP14A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CONV-SP14A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CONV-SP14A Ser A
|
1336-CONV-SP14A/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CONV-SP14A |
Description | AC Drive DC Bus Fuse Replacement |
Fuse Rating | 200 Amps |
Frame Type | D Frame |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CONV-SP14A |
Description | AC Drive DC Bus Fuse Replacement |
Fuse Rating | 200 Amps |
Frame Type | D Frame |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONV-SP14A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONV-SP14A units instead of migration.
The Allen Bradley 1336-CONV-SP14A DC BUS Fuse Replacement Kit is a DC fuse and Diode replacement kit for the 1336 Plus, Force, and Impact AC Digital drives with a 200A current rating, a 460 Volt AC voltage rating, and a 60 Horsepower output power rating. This fuse is located on the drive’s main chassis just between the drive’s power supply board and the main control board mounting plate; the fuse provides circuit protection from line surges. The 1336-CONV-SP14A fuse kit contains 200A rated Class CC fuse, which provides a drive’s designated short-circuit ratings. This module is installed on the drives main chassis via the following installation steps. Firstly, disconnect power from the drive, and check for zero Volts at the drive’s Terminal base (TB1) +DC and –DC Terminals. Attach the 200A Fuse from the DC BUS Fuse kit to fuse block bolt, and also attach the Diode (D2 supplied Diode) to the fuse block bolt. Fasten the fuse plus the supplied Diode to the fuse block using tighten the bolt with 11.0 to 12.5 N-m tightening torque. The base driver board, power supply board, and the main control board mounting plate is inserted into the drive. The drive is turned and check for installation status via LED light indicators on the drive.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONV-SP14A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONV-SP14A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CONV-SP14A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CONV-SP14A Ser A
|
1336-CONV-SP14A/A, Series A, Rev A | Request Quote |