DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-CONVCF-SP2A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONVCF-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONVCF-SP2A units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONVCF-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONVCF-SP2A units instead of migration.
sThe Allen-Bradley 1336-CONVCF-SP2A is a Series E Front End Conversion Kit for C-frame sized 1336 series AC drives. This assembly is intended to be used to service C-frame drives from 1336 series. The user can use this front-end conversion kit with 1336 PLUS, 1336 PLUS II, 1336 IMPACT, and 1336 FORCE AC drives that are built to work with motors between 25 Horsepower and 60 Horsepower. The 1336-CONVCF-SP2A will be exclusively used when there is a need to replace Snubber Boards with order codes 1336-SN-SP2A, 1336-SN-SP1A, or 1336-SN-SP1B, and/or Bridge Rectifiers 1336-BR-SP5A or 1336-BR-SP6A on the AC drive. This must be done in this way because all of these parts are obsolete. The Snubber Board and Bridge Rectifier available in this kit cannot be replaced as 1:1 components in the old AC drive. The correct procedure is to take Main Control Board with mounting plate (and optional cards), Gate Driver Board, Precharge Board with mounting brackets and drive enclosure from the original AC drive and upgrade it with the Allen-Bradley 1336-CONVCF-SP2A conversion kit.
The 1336-CONVCF-SP2A conversion kit includes everything except parts listed above. There are also bus inductor and bus fuse, a label to mount next to the nameplate after kit installation, 1/4 turn screws for the Snubber Board fixing, and two IGBT shorting devices for the J8 and J7 terminal stripes. Before conducting any installation work, be sure to do program backup of the AC drive.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONVCF-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CONVCF-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CONVCF-SP2A Ser A
|
1336-CONVCF-SP2A/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CONVCF-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CONVCF-SP2A units instead of migration.
The Allen-Bradley 1336-CONVCF-SP2A is a Series E Front End Conversion Kit for C-frame sized 1336 series AC drives. This assembly is intended to be used to service C-frame drives from 1336 series. The user can use this front-end conversion kit with 1336 PLUS, 1336 PLUS II, 1336 IMPACT, and 1336 FORCE AC drives that are built to work with motors between 25 Horsepower and 60 Horsepower. The 1336-CONVCF-SP2A will be exclusively used when there is a need to replace Snubber Boards with order codes 1336-SN-SP2A, 1336-SN-SP1A, or 1336-SN-SP1B, and/or Bridge Rectifiers 1336-BR-SP5A or 1336-BR-SP6A on the AC drive. This must be done in this way because all of these parts are obsolete. The Snubber Board and Bridge Rectifier available in this kit cannot be replaced as 1:1 components in the old AC drive. The correct procedure is to take Main Control Board with mounting plate (and optional cards), Gate Driver Board, Precharge Board with mounting brackets and drive enclosure from the original AC drive and upgrade it with the Allen-Bradley 1336-CONVCF-SP2A conversion kit.
The 1336-CONVCF-SP2A conversion kit includes everything except parts listed above. There are also bus inductor and bus fuse, a label to mount next to the nameplate after kit installation, 1/4 turn screws for the Snubber Board fixing, and two IGBT shorting devices for the J8 and J7 terminal stripes. Before conducting any installation work, be sure to do program backup of the AC drive.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONVCF-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CONVCF-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CONVCF-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CONVCF-SP2A Ser A
|
1336-CONVCF-SP2A/A, Series A, Rev A | Request Quote |