1336-F1-SP6A | Allen Bradley Drives 1336 Adjustable

1336-F1-SP6A

Rated 4.4 with 4 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-F1-SP6A

Revisions: Ser A 
Description: The Allen Bradley 1336-F1-SP6A is a Bus Fuse Kit for 1336 series Adjustable Frequency AC Drives. This spare part is compatible with all “Frame E” AC drives form 1336 family (1336 FORCE, 1336 PLUS, 1336 PLUS II, and 1336 IMPACT & REGEN). It is engineered to withstand voltages up to 700 Volts AC and currents up to 600 Amps. This part is a semiconductor, form 101 fuse. read more...
Available Now
Request a quote for 1336-F1-SP6A

Description: The Allen Bradley 1336-F1-SP6A is a Bus Fuse Kit for 1336 series Adjustable Frequency AC Drives. This spare part is compatible with all “Frame E” AC drives form 1336 family (1336 FORCE, 1336 PLUS, 1336 PLUS II, and 1336 IMPACT & REGEN). It is engineered to withstand voltages up to 700 Volts AC and currents up to 600 Amps. This part is a semiconductor, form 101 fuse. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-F1-SP6A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 4 reviews

    Technical Specifications for 1336-F1-SP6A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-F1-SP6A
DescriptionFuse Bus
Voltage700 Volts
FrameE
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-F1-SP6A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-F1-SP6A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-F1-SP6A
DescriptionFuse Bus
Voltage700 Volts
FrameE
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-F1-SP6A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-F1-SP6A units instead of migration.

s

About 1336-F1-SP6A

The Allen Bradley 1336-F1-SP6A is a Bus Fuse Kit for 1336 series Adjustable Frequency AC Drives. This spare part is compatible with all “Frame E” AC drives form 1336 family (1336 FORCE, 1336 PLUS, 1336 PLUS II, and 1336 IMPACT & REGEN). It is engineered to withstand voltages up to 700 Volts AC and currents up to 600 Amps. This part is a semiconductor, form 101 fuse. The bus fuse kit encompasses 600 Amps fuse, 2 screws and 4 washers. In order to replace the bus fuse, it can be found at the top of the heat sink. Before continuing with a replacement, first measure the resistance of the old fuse to be sure that it needs to be replaced. Before doing so, turn off the AC drive and wait until there is no residual voltage left. Measure voltage across bus contacts; it must be 0 volts. Use electrostatic discharge straps to avoid static discharge, which may cause damage to the MCB board or to the drive’s sensitive components. It is strongly advised to check that the contacts of the fuse are clean and that there is no corrosion (which may cause the fuse to look faulty when it’s not). After replacement of the 1336-F1-SP6A kit, put all guards back to their place and only then you should apply power to the AC drive device. Failure to do this may cause serious injuries and death. The Allen Bradley 1336-F1-SP6A Bus Fuse replacement Kit can be used in surroundings with ambient temperatures from 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) and with relative humidity between 5 and 95%. This fuse kit is KC certified.



Technical Description of 1336-F1-SP6A

Allen-Bradley Fuse Bus with 700 Volts and E Frame Compatability

Repair Services for 1336-F1-SP6A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-F1-SP6A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-F1-SP6A

Please refer to the manual for more information about the 1336-F1-SP6A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-F1-SP6A Ser A
1336-F1-SP6A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-F1-SP6A
  • 1336-Fl-SP6A
  • 1336F1SP6A

Dimensions For 1336-F1-SP6A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-F1-SP6A

Resolutions For 1336-F1-SP6A

About

Technical Specifications for 1336-F1-SP6A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-F1-SP6A
DescriptionFuse Bus
Voltage700 Volts
FrameE
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-F1-SP6A
DescriptionFuse Bus
Voltage700 Volts
FrameE
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-F1-SP6A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-F1-SP6A units instead of migration.

About 1336-F1-SP6A

The Allen Bradley 1336-F1-SP6A is a Bus Fuse Kit for 1336 series Adjustable Frequency AC Drives. This spare part is compatible with all “Frame E” AC drives form 1336 family (1336 FORCE, 1336 PLUS, 1336 PLUS II, and 1336 IMPACT & REGEN). It is engineered to withstand voltages up to 700 Volts AC and currents up to 600 Amps. This part is a semiconductor, form 101 fuse. The bus fuse kit encompasses 600 Amps fuse, 2 screws and 4 washers. In order to replace the bus fuse, it can be found at the top of the heat sink. Before continuing with a replacement, first measure the resistance of the old fuse to be sure that it needs to be replaced. Before doing so, turn off the AC drive and wait until there is no residual voltage left. Measure voltage across bus contacts; it must be 0 volts. Use electrostatic discharge straps to avoid static discharge, which may cause damage to the MCB board or to the drive’s sensitive components. It is strongly advised to check that the contacts of the fuse are clean and that there is no corrosion (which may cause the fuse to look faulty when it’s not). After replacement of the 1336-F1-SP6A kit, put all guards back to their place and only then you should apply power to the AC drive device. Failure to do this may cause serious injuries and death. The Allen Bradley 1336-F1-SP6A Bus Fuse replacement Kit can be used in surroundings with ambient temperatures from 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) and with relative humidity between 5 and 95%. This fuse kit is KC certified.



Technical Description of 1336-F1-SP6A

Allen-Bradley Fuse Bus with 700 Volts and E Frame Compatability
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-F1-SP6A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-F1-SP6A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-F1-SP6A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-F1-SP6A Ser A
1336-F1-SP6A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-F1-SP6A
  • 1336-Fl-SP6A
  • 1336F1SP6A
PDF