DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-FAN-SP6B. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-FAN-SP6B has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-FAN-SP6B units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-FAN-SP6B has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-FAN-SP6B units instead of migration.
sThe Allen-Bradley 1336-FAN-SP6B is a heatsink fan that belongs to the Allen-Bradley 1336 Plus, Plus II, Impact, and Force drives. This product line of adjustable frequency AC drives is manufactured and designed by Allen-Bradley/Rockwell Automation. The Allen-Bradley 1336-FAN-SP6B heatsink fan belongs to Frame F frequency drives and it operates at a Horsepower rating that goes from 250 to 450 Horsepower. The power required by this fan is delivered through auxiliary input TB4. The importance of the Allen-Bradley 1336-FAN-SP6B heatsink fan lies In the fact that the 1336 drive it is connected to requires a device that helps it to receive proper ventilation. It is important to remark that the temperature range goes from 0 to 40 degrees Celsius. This part is intended to provide a means of ventilation or cooling by convection method.
When the heatsink temperature exceeds a temperature of 90 degrees Celsius, an excessive temperature fault will be triggered. A blocked or dirty heatsink fan could cause the increase of temperature and impede ventilation. This fault should be corrected immediately to prevent the drive from overheating. If there is no way to correct the temperature increase, the drive should be derated. The installation of the Allen-Bradley 1336-FAN-SP6B heatsink fan is not difficult but it needs to be performed by an Allen-Bradley expert. All the power needs to be removed from the drive before installation. The heatsink fan is intended to be connected on the lower left corner of the 1336 drive chassis. If the fan voltage differs from the drive voltage, a transformer tap may be used.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-FAN-SP6B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-FAN-SP6B such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-FAN-SP6B Ser A
|
1336-FAN-SP6B/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-FAN-SP6B has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-FAN-SP6B units instead of migration.
The Allen-Bradley 1336-FAN-SP6B is a heatsink fan that belongs to the Allen-Bradley 1336 Plus, Plus II, Impact, and Force drives. This product line of adjustable frequency AC drives is manufactured and designed by Allen-Bradley/Rockwell Automation. The Allen-Bradley 1336-FAN-SP6B heatsink fan belongs to Frame F frequency drives and it operates at a Horsepower rating that goes from 250 to 450 Horsepower. The power required by this fan is delivered through auxiliary input TB4. The importance of the Allen-Bradley 1336-FAN-SP6B heatsink fan lies In the fact that the 1336 drive it is connected to requires a device that helps it to receive proper ventilation. It is important to remark that the temperature range goes from 0 to 40 degrees Celsius. This part is intended to provide a means of ventilation or cooling by convection method.
When the heatsink temperature exceeds a temperature of 90 degrees Celsius, an excessive temperature fault will be triggered. A blocked or dirty heatsink fan could cause the increase of temperature and impede ventilation. This fault should be corrected immediately to prevent the drive from overheating. If there is no way to correct the temperature increase, the drive should be derated. The installation of the Allen-Bradley 1336-FAN-SP6B heatsink fan is not difficult but it needs to be performed by an Allen-Bradley expert. All the power needs to be removed from the drive before installation. The heatsink fan is intended to be connected on the lower left corner of the 1336 drive chassis. If the fan voltage differs from the drive voltage, a transformer tap may be used.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-FAN-SP6B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-FAN-SP6B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-FAN-SP6B such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-FAN-SP6B Ser A
|
1336-FAN-SP6B/A, Series A, Rev A | Request Quote |