DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley Comunications Circuit Board with DeviceNet communication, 125K (Factory-Default) Data Rate, and Drive-Supplied Input Power
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-GM5. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-GM5 |
Description | Comunications Circuit Board |
Communications | DeviceNet |
Data Rate | 125K (Factory-Default) |
Input Power | Drive-Supplied |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-GM5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-GM5 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-GM5 |
Description | Comunications Circuit Board |
Communications | DeviceNet |
Data Rate | 125K (Factory-Default) |
Input Power | Drive-Supplied |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-GM5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-GM5 units instead of migration.
sThe Allen-Bradley 1336-GM5 drive is best utilized with a circuit that can emit up to 200,000 RMS symmetrical Amps, 600 Volts optimum when used with the proper AC input line fuses as specified by the manufacturer. The drive is supposed to be used on the three-phase supply systems that have symmetrically designed line voltages. There are surge suppression devices which are ideal for protecting the drive from the lightning-induced overvoltage between the ground and line. The 1336-GM5 drive comes with a Metal Oxide Varistor that ensures the surge protection and phase-to-ground and phase-phase protection that is made to meet the IEEE 587 regulations.
The MOV circuit in the 1336-GM5 is designed for transient line protection, but not for continuous operation. It is not advisable that the published line-to-ground and line-to-line energy voltage ratings be surpassed because that might cause critical physical damage to the system. The drive works best when directly connected to the AC line with the correct voltage which has the minimum impedance of 1% relative to the drive input KVA. If the impedance is significantly low, interruptions can create too many spikes that which cause overvoltage faults, that can damage the drive. With the 1336-GM5, the stop/start regulation circuitry includes solid-state components. In case of danger due to accidental contacts with the machinery by solid debris or fluids, then there will be a need for additional hardwire circuits to remove the AC line power to the drive. This drive must be regulated by control input signals that would stop and start the engine.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1604 | ![]() |
Our highly skilled technicians can repair your 1336-GM5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-GM5 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-GM5 Ser A
|
1336-GM5/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-GM5 |
Description | Comunications Circuit Board |
Communications | DeviceNet |
Data Rate | 125K (Factory-Default) |
Input Power | Drive-Supplied |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-GM5 |
Description | Comunications Circuit Board |
Communications | DeviceNet |
Data Rate | 125K (Factory-Default) |
Input Power | Drive-Supplied |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-GM5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-GM5 units instead of migration.
The Allen-Bradley 1336-GM5 drive is best utilized with a circuit that can emit up to 200,000 RMS symmetrical Amps, 600 Volts optimum when used with the proper AC input line fuses as specified by the manufacturer. The drive is supposed to be used on the three-phase supply systems that have symmetrically designed line voltages. There are surge suppression devices which are ideal for protecting the drive from the lightning-induced overvoltage between the ground and line. The 1336-GM5 drive comes with a Metal Oxide Varistor that ensures the surge protection and phase-to-ground and phase-phase protection that is made to meet the IEEE 587 regulations.
The MOV circuit in the 1336-GM5 is designed for transient line protection, but not for continuous operation. It is not advisable that the published line-to-ground and line-to-line energy voltage ratings be surpassed because that might cause critical physical damage to the system. The drive works best when directly connected to the AC line with the correct voltage which has the minimum impedance of 1% relative to the drive input KVA. If the impedance is significantly low, interruptions can create too many spikes that which cause overvoltage faults, that can damage the drive. With the 1336-GM5, the stop/start regulation circuitry includes solid-state components. In case of danger due to accidental contacts with the machinery by solid debris or fluids, then there will be a need for additional hardwire circuits to remove the AC line power to the drive. This drive must be regulated by control input signals that would stop and start the engine.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1604 | ![]() |
Our highly skilled technicians can repair your 1336-GM5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1604 | ![]() |
Our highly skilled technicians can repair your 1336-GM5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-GM5 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-GM5 Ser A
|
1336-GM5/A, Series A, Rev A | Request Quote |