Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 Adjustable 1336-MOD-KC005

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-MOD-KC005

|
Need a Specific Revision?

The 1336-MOD-KC005 dynamic brake module is a heavy-duty 1336 AC drive-compatible brake module from Allen-Bradley. It comes with a self-contained NEMA Type 1 enclosure for protection. It runs on 500 to 575 Volts AC voltage, 52.7 Ohms of dynamic brake resistance, and 2063 Watts of average dissipations.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-MOD-KC005

ManufacturerAllen Bradley
Product TypeHeavy Duty Dynamic Brake
Product Line1336 Adjustable
Part Number1336-MOD-KC005
Weight16.00 lbs (7.26 kg)
EnclosureNEMA Type 1 (IP20)
Voltage Rating500/575 Volts AC
Drive Ratings003-005
Dynamic Brake Resistance108 Ohms
Average Wattage Dissipation1500 Watts
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-MOD-KC005 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-MOD-KC005 units instead of migration.

Request a Repair

The 1336-MOD-KC005 dynamic brake module is a heavy-duty 1336 AC drive-compatible brake module from Allen-Bradley. It comes with a self-contained NEMA Type 1 enclosure for device protection. It has a 500 to 575 Volts AC voltage rating, 52.7 Ohms of dynamic brake resistance, and 2063 Watts of average wattage dissipations. Its weight is approximately 6.8 kilograms and its ambient operating temperature range is from -10 to 50 degrees Celsius. This IP 20 rated braking module is not recommended for use in an atmosphere with corrosive or hazardous dust, vapor, and gas. The 1336-MOD-KC005 dynamic brake module can be used with the B003 to B250 and C003 to C250 1336 drives and B003 to B250 1336VT drives.

The 1336-MOD-KC005 dynamic brake module consists of a chopper transistor with related control components and a dynamic brake resistor. The enclosure of the module has 2 lights on the front to indicate the operation. They are DC Power light to indicate that the DC power has been applied to the module, and the Brake On light to indicate the operation of the chopper module. When selecting the rating for this module, the motor power rating, speed, torque, and details regarding the regenerative mode of operation will be required. For this module, DC brake power is supplied from the drive's DC Bus. When installing the brake enclosure, make sure to install it in a vertical position. When an application needs more than one 1336-MOD-KC005 dynamic brake module enclosure, the first enclosure must be mounted within 3 meters of the drive. A maximum of 1.5 meters of distance must be maintained between the brake enclosures.