1336-R1-SP1A - In Stock | Allen Bradley Drives 1336 Adjustable

1336-R1-SP1A

Rated 5 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-R1-SP1A

Revisions: Ser A 
Description: The 1336-R1-SP1A is a 0.5 Ohm snubber resistor kit for power module boards on 1336 PLUS, 1336 PLUS II, 1336 IMPACT and 1336 FORCE drives from Allen Bradley. It is compatible with Frame D drives with output ratings ranging from 60 to 180 Horsepower. The1336-R1-SP1A module is available as a spare part from Allen Bradley
In Stock Ships Today
Request a quote for 1336-R1-SP1A

Description:

The 1336-R1-SP1A is a 0.5 Ohm snubber resistor kit for power module boards on 1336 PLUS, 1336 PLUS II, 1336 IMPACT and 1336 FORCE drives from Allen Bradley. It is compatible with Frame D drives with output ratings ranging from 60 to 180 Horsepower. The1336-R1-SP1A module is available as a spare part from Allen Bradley


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-R1-SP1A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 15 reviews

    Technical Specifications for 1336-R1-SP1A

BrandAllen Bradley / Rockwell Automation
Series1336 PCB Board
Part Number1336-R1-SP1A
Resistance0.5 Ohm
Product typeSpare part
Compatibility1336 PLUS/PLUSII/FORCE/IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP1A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP1A units instead of migration.

BrandAllen Bradley / Rockwell Automation
Series1336 PCB Board
Part Number1336-R1-SP1A
Resistance0.5 Ohm
Product typeSpare part
Compatibility1336 PLUS/PLUSII/FORCE/IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP1A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP1A units instead of migration.

s

About 1336-R1-SP1A

The 1336-R1-SP1A snubber resistor is a 0.5 Ohm snubber resistor kit for power module boards on the 1336 PLUS, 1336 PLUS II, 1336 IMPACT, and 1336 FORCE drives from Allen-Bradley. It is compatible with Frame D 1336 drives with output power ratings ranging from 60 to 180 Horsepower. Three kits are required per drive. The1336-R1-SP1A snubber resistor is available as a spare part from Allen-Bradley. The Allen-Bradley 1336 PLUS drives are adjustable frequency AC drives that offer 0.5 to 600 Horsepower output power. The Allen-Bradley 1336 FORCE series drives are adjustable frequency AC drives that offer 1 to 650 Horsepower output power. The Allen-Bradley 1336 PLUS drives are adjustable frequency AC drives that offer 0.5 to 600 Horsepower output power. The Allen-Bradley 1336 IMPACT drives are adjustable frequency AC drives that offer 0.5 to 800 Horsepower output power.



 



A snubber resistor such as the 1336-R1-SP1A snubber resistor is used to suppress voltage transients in electrical circuits. Usually, a snubber resistor is used in series with a capacitor. Allen-Bradley 1336 drives contain ESD sensitive assemblies and circuits. Therefore, static control precautions are highly recommended during drive installation, maintenance, testing, and repair. Since hazardous voltages are present in Allen-Bradley 1336 series drives, therefore to prevent shock hazards, drive troubleshooting, including the replacement of the 1336-R1-SP1A snubber resistor, should only be performed when the power supply is disconnected. Furthermore, only trained technicians should carry out the maintenance activities on these high-powered drives. Drive repair should only be performed according to the guidelines contained in the repair manual.



Repair Services for 1336-R1-SP1A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-R1-SP1A

Please refer to the manual for more information about the 1336-R1-SP1A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP1A Ser A
1336-R1-SP1A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-R1-SP1A
  • 1336-Rl-SP1A
  • 1336-R1-SPlA
  • 1336R1SP1A

Dimensions For 1336-R1-SP1A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-R1-SP1A

Resolutions For 1336-R1-SP1A

About

Technical Specifications for 1336-R1-SP1A

BrandAllen Bradley / Rockwell Automation
Series1336 PCB Board
Part Number1336-R1-SP1A
Resistance0.5 Ohm
Product typeSpare part
Compatibility1336 PLUS/PLUSII/FORCE/IMPACT
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen Bradley / Rockwell Automation
Series1336 PCB Board
Part Number1336-R1-SP1A
Resistance0.5 Ohm
Product typeSpare part
Compatibility1336 PLUS/PLUSII/FORCE/IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP1A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP1A units instead of migration.

About 1336-R1-SP1A

The 1336-R1-SP1A snubber resistor is a 0.5 Ohm snubber resistor kit for power module boards on the 1336 PLUS, 1336 PLUS II, 1336 IMPACT, and 1336 FORCE drives from Allen-Bradley. It is compatible with Frame D 1336 drives with output power ratings ranging from 60 to 180 Horsepower. Three kits are required per drive. The1336-R1-SP1A snubber resistor is available as a spare part from Allen-Bradley. The Allen-Bradley 1336 PLUS drives are adjustable frequency AC drives that offer 0.5 to 600 Horsepower output power. The Allen-Bradley 1336 FORCE series drives are adjustable frequency AC drives that offer 1 to 650 Horsepower output power. The Allen-Bradley 1336 PLUS drives are adjustable frequency AC drives that offer 0.5 to 600 Horsepower output power. The Allen-Bradley 1336 IMPACT drives are adjustable frequency AC drives that offer 0.5 to 800 Horsepower output power.



 



A snubber resistor such as the 1336-R1-SP1A snubber resistor is used to suppress voltage transients in electrical circuits. Usually, a snubber resistor is used in series with a capacitor. Allen-Bradley 1336 drives contain ESD sensitive assemblies and circuits. Therefore, static control precautions are highly recommended during drive installation, maintenance, testing, and repair. Since hazardous voltages are present in Allen-Bradley 1336 series drives, therefore to prevent shock hazards, drive troubleshooting, including the replacement of the 1336-R1-SP1A snubber resistor, should only be performed when the power supply is disconnected. Furthermore, only trained technicians should carry out the maintenance activities on these high-powered drives. Drive repair should only be performed according to the guidelines contained in the repair manual.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-R1-SP1A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP1A Ser A
1336-R1-SP1A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-R1-SP1A
  • 1336-Rl-SP1A
  • 1336-R1-SPlA
  • 1336R1SP1A
PDF