1336-R1-SP2A - In Stock | Allen Bradley Drives 1336 Adjustable

1336-R1-SP2A

Rated 4.4 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-R1-SP2A

Revisions: Ser A 
Description: The Allen-Bradley 1336-R1-SP2A is a component of the Bulletin 1336 drives. This unit is a Power Module with snubber resistor used for 1336 Plus, Plus II, Impact and Force drives. This is used for Frame E drives.
In Stock Ships Today
Request a quote for 1336-R1-SP2A

Description: The Allen-Bradley 1336-R1-SP2A is a component of the Bulletin 1336 drives. This unit is a Power Module with snubber resistor used for 1336 Plus, Plus II, Impact and Force drives. This is used for Frame E drives.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-R1-SP2A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 6 reviews

    Technical Specifications for 1336-R1-SP2A

BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP2A
DescriptionPower Module Snubber Resistor
T.G. SymbolR20-R22
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP2A units instead of migration.

BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP2A
DescriptionPower Module Snubber Resistor
T.G. SymbolR20-R22
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP2A units instead of migration.

s

About 1336-R1-SP2A

The 1336-R1-SP2A is a Power Module with snubber resistor that is used for Allen-Bradley 1336 adjustable frequency AC drives. Specifically, this component is compatible for 1336 Plus, Plus II, Force and Impact drives. This module as the name implies, is responsible for delivering power to different boards internally installed within the drive assembly.

The entire 1336 drive is a discontinued product family including this Power Module with snubber resistor. Also, all drives are equipped with the appropriate number of this component as this is required for the operation of the drive. This means that this component is a replacement to a defective Power module.

Use this 1336 Drive component for drives with output Power of 150 HP, 200 Hp and 250 HP or Frame E drives. Three (3) units of this component is required for each drive. This hardware is a Level 3 component with a troubleshooting symbol guide of R20 to R22.

When installing this component, ensure that only qualified personnel are performing this hardware modification. It is important to practice caution as the drive uses capacitors to retain voltage for a short period. Ensure that the bus voltage is properly discharge before installing the Power Module. Additionally, this replacement part may only be installed when the drive is powered off.

Each frame size has a designed Power Module. For Frame D drives, SP1A is used, Frame F SP4B or SP5A and SP3A for Frame G drives. The number of kits or installation instance also varies depending on the drive used.

The 1336-R1-SP2A is a power module with a snubber resistor, designed by Allen-Bradley specifically as a spare part of the 1336 plus, plus II, force and impact series of adjustable frequency AC drives. The 1336-R1-SP2A power module with a snubber resistor is a vital part of any controller or drive. Power modules with snubbers are specially designed to minimize and eliminate voltage spikes and variances caused by circuit inductance that might affect the whole functioning and performance of the drive. The 1336-R1-SP2A power module with a snubber resistor is fully compatible with frame E models. It can operate with drives whose horsepower ratings are 150, 200, and 250 Hp and with an input voltage of 575 Volts. Each drive requires three kits of power modules with snubber resistors. This kit of the power module with a snubber resistor includes two resistors with their own mounting rackets, four different wires, two tie wraps, four screws and two blister packs. Prior to the installation of the snubber resistor, the drive has to be turned off and the bus voltage needs to be zero volts. Tools like pliers, screwdrivers, and side cutters may be needed. The technician in charge of this installation must have previous experience with this kind of electronic devices before attempting to install or intervene a drive-by its own, it could interfere directly with the life of the drive and all the spare parts involved.

Technical Description of 1336-R1-SP2A

Allen-Bradley Power Module Snubber Resistor with E Frame, and 150 HP, 200 HP, 250 HP Model Rating

Repair Services for 1336-R1-SP2A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-R1-SP2A

Please refer to the manual for more information about the 1336-R1-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP2A Ser A
1336-R1-SP2A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-R1-SP2A
  • 1336-Rl-SP2A
  • 1336R1SP2A

Reviews for 1336-R1-SP2A

Product Review

"The 1336-R1-SP2A is a Power Module that is used for Frame E drives. This module is designed for drives delivering higher power output unlike 1336-R1-SP1A which is used for Frame D drives which has lower power output drives. " -DO Supply Tech

Dimensions For 1336-R1-SP2A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-R1-SP2A

Resolutions For 1336-R1-SP2A

About

Technical Specifications for 1336-R1-SP2A

BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP2A
DescriptionPower Module Snubber Resistor
T.G. SymbolR20-R22
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP2A
DescriptionPower Module Snubber Resistor
T.G. SymbolR20-R22
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP2A units instead of migration.

About 1336-R1-SP2A

The 1336-R1-SP2A is a Power Module with snubber resistor that is used for Allen-Bradley 1336 adjustable frequency AC drives. Specifically, this component is compatible for 1336 Plus, Plus II, Force and Impact drives. This module as the name implies, is responsible for delivering power to different boards internally installed within the drive assembly.

The entire 1336 drive is a discontinued product family including this Power Module with snubber resistor. Also, all drives are equipped with the appropriate number of this component as this is required for the operation of the drive. This means that this component is a replacement to a defective Power module.

Use this 1336 Drive component for drives with output Power of 150 HP, 200 Hp and 250 HP or Frame E drives. Three (3) units of this component is required for each drive. This hardware is a Level 3 component with a troubleshooting symbol guide of R20 to R22.

When installing this component, ensure that only qualified personnel are performing this hardware modification. It is important to practice caution as the drive uses capacitors to retain voltage for a short period. Ensure that the bus voltage is properly discharge before installing the Power Module. Additionally, this replacement part may only be installed when the drive is powered off.

Each frame size has a designed Power Module. For Frame D drives, SP1A is used, Frame F SP4B or SP5A and SP3A for Frame G drives. The number of kits or installation instance also varies depending on the drive used.

The 1336-R1-SP2A is a power module with a snubber resistor, designed by Allen-Bradley specifically as a spare part of the 1336 plus, plus II, force and impact series of adjustable frequency AC drives. The 1336-R1-SP2A power module with a snubber resistor is a vital part of any controller or drive. Power modules with snubbers are specially designed to minimize and eliminate voltage spikes and variances caused by circuit inductance that might affect the whole functioning and performance of the drive. The 1336-R1-SP2A power module with a snubber resistor is fully compatible with frame E models. It can operate with drives whose horsepower ratings are 150, 200, and 250 Hp and with an input voltage of 575 Volts. Each drive requires three kits of power modules with snubber resistors. This kit of the power module with a snubber resistor includes two resistors with their own mounting rackets, four different wires, two tie wraps, four screws and two blister packs. Prior to the installation of the snubber resistor, the drive has to be turned off and the bus voltage needs to be zero volts. Tools like pliers, screwdrivers, and side cutters may be needed. The technician in charge of this installation must have previous experience with this kind of electronic devices before attempting to install or intervene a drive-by its own, it could interfere directly with the life of the drive and all the spare parts involved.

Technical Description of 1336-R1-SP2A

Allen-Bradley Power Module Snubber Resistor with E Frame, and 150 HP, 200 HP, 250 HP Model Rating
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-R1-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP2A Ser A
1336-R1-SP2A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-R1-SP2A
  • 1336-Rl-SP2A
  • 1336R1SP2A
PDF
Reviews

Reviews for 1336-R1-SP2A

Product Review

"The 1336-R1-SP2A is a Power Module that is used for Frame E drives. This module is designed for drives delivering higher power output unlike 1336-R1-SP1A which is used for Frame D drives which has lower power output drives. " -DO Supply Tech