1336-R1-SP5A - In Stock | Allen Bradley Drives 1336 Adjustable

1336-R1-SP5A

Rated 4.7 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-R1-SP5A

Revisions: Ser A 
Description: The Allen-Bradley 1336-R1-SP5A Snubber Resistor and Converter Kit is a snubber resistor/converter kit assembly for the Allen-Bradley 1336 F Frame Plus, Plus II, Impact, and Force Digital AC drives. The 1336-R1-SP5A Snubber Resistor is used to suppress high-voltage spikes (DV/DT) in the drive’s circuit (R11-R13). This assembly kit contains 2 supplied resistors on the mounting bracket, 4 different wires (Q01 to Q04), 2 tie wraps, 4 supplied tightening screws, and 2 blister packs. read more...
In Stock Ships Today
Request a quote for 1336-R1-SP5A

Description: The Allen-Bradley 1336-R1-SP5A Snubber Resistor and Converter Kit is a snubber resistor/converter kit assembly for the Allen-Bradley 1336 F Frame Plus, Plus II, Impact, and Force Digital AC drives. The 1336-R1-SP5A Snubber Resistor is used to suppress high-voltage spikes (DV/DT) in the drive’s circuit (R11-R13). This assembly kit contains 2 supplied resistors on the mounting bracket, 4 different wires (Q01 to Q04), 2 tie wraps, 4 supplied tightening screws, and 2 blister packs. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-R1-SP5A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 5 reviews

    Technical Specifications for 1336-R1-SP5A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP5A
DescriptionPower Module Snubber Resistor
T.G. SymbolR11-R13
Frame ModelF
Model Ratings250 HP, 300 HP, 350 HP, 400 HP, 450 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP5A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP5A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP5A
DescriptionPower Module Snubber Resistor
T.G. SymbolR11-R13
Frame ModelF
Model Ratings250 HP, 300 HP, 350 HP, 400 HP, 450 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP5A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP5A units instead of migration.

s

About 1336-R1-SP5A

The Allen-Bradley 1336-R1-SP5A Snubber Resistor and Converter Kit is a snubber resistor/converter kit assembly for the Allen-Bradley 1336 F Frame Plus, Plus II, Impact, and Force Digital AC drives. The 1336-R1-SP5A Snubber Resistor is used to suppress high-voltage spikes (DV/DT) in the drive’s circuit (R11-R13). This assembly kit contains 2 supplied resistors on the mounting bracket, 4 different wires (Q01 to Q04), 2 tie wraps, 4 supplied tightening screws, and 2 blister packs. The 1336-R1-SP5A Snubber Resistor is located on the main heatsink, behind the inverter housing assembly.



The 1336-R1-SP5A Snubber Resistor is installed on the main heatsink by connecting the supplied red and black (Q01 and Q02, Q03 and Q04) wires to the designated spot on the resistor, and applying a layer of thermal grease from the supplied blister pack to the resistor mounting bracket to aid heat dissipation. The wires connected resistors are attached to the top of the half-bridge assembly using 2 of the 4 supplied tightening screws. The red wire (Q01) is attached to the J1 (+) terminal using pliers, and the black wire (Q02) is attached to the negative (-) CAP BUS terminal (J2) using the 2 supplied tightening screws. Also, the wires Q03 (red) and Q04 (black) from the remaining 2 resistors are attached to the half-bridge assembly, with the red wire on the left, using the remaining 2 user-supplied screws. The Q03 and Q04 wires are connected in the same manner as the Q01 and Q02 wires, the plastic cover protecting the Snubber Resistor board is reinstalled, and power applied to the drive.



Technical Description of 1336-R1-SP5A

Allen-Bradley Power Module Snubber Resistor with F Frame, and 250 HP, 300 HP, 350 HP, 400 HP, 450 HP Model Rating

Repair Services for 1336-R1-SP5A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP5A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-R1-SP5A

Please refer to the manual for more information about the 1336-R1-SP5A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP5A Ser A
1336-R1-SP5A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-R1-SP5A
  • 1336-Rl-SP5A
  • 1336R1SP5A

Dimensions For 1336-R1-SP5A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-R1-SP5A

Resolutions For 1336-R1-SP5A

About

Technical Specifications for 1336-R1-SP5A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP5A
DescriptionPower Module Snubber Resistor
T.G. SymbolR11-R13
Frame ModelF
Model Ratings250 HP, 300 HP, 350 HP, 400 HP, 450 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-R1-SP5A
DescriptionPower Module Snubber Resistor
T.G. SymbolR11-R13
Frame ModelF
Model Ratings250 HP, 300 HP, 350 HP, 400 HP, 450 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-R1-SP5A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-R1-SP5A units instead of migration.

About 1336-R1-SP5A

The Allen-Bradley 1336-R1-SP5A Snubber Resistor and Converter Kit is a snubber resistor/converter kit assembly for the Allen-Bradley 1336 F Frame Plus, Plus II, Impact, and Force Digital AC drives. The 1336-R1-SP5A Snubber Resistor is used to suppress high-voltage spikes (DV/DT) in the drive’s circuit (R11-R13). This assembly kit contains 2 supplied resistors on the mounting bracket, 4 different wires (Q01 to Q04), 2 tie wraps, 4 supplied tightening screws, and 2 blister packs. The 1336-R1-SP5A Snubber Resistor is located on the main heatsink, behind the inverter housing assembly.



The 1336-R1-SP5A Snubber Resistor is installed on the main heatsink by connecting the supplied red and black (Q01 and Q02, Q03 and Q04) wires to the designated spot on the resistor, and applying a layer of thermal grease from the supplied blister pack to the resistor mounting bracket to aid heat dissipation. The wires connected resistors are attached to the top of the half-bridge assembly using 2 of the 4 supplied tightening screws. The red wire (Q01) is attached to the J1 (+) terminal using pliers, and the black wire (Q02) is attached to the negative (-) CAP BUS terminal (J2) using the 2 supplied tightening screws. Also, the wires Q03 (red) and Q04 (black) from the remaining 2 resistors are attached to the half-bridge assembly, with the red wire on the left, using the remaining 2 user-supplied screws. The Q03 and Q04 wires are connected in the same manner as the Q01 and Q02 wires, the plastic cover protecting the Snubber Resistor board is reinstalled, and power applied to the drive.



Technical Description of 1336-R1-SP5A

Allen-Bradley Power Module Snubber Resistor with F Frame, and 250 HP, 300 HP, 350 HP, 400 HP, 450 HP Model Rating
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP5A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-R1-SP5A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-R1-SP5A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-R1-SP5A Ser A
1336-R1-SP5A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-R1-SP5A
  • 1336-Rl-SP5A
  • 1336R1SP5A
PDF