1336-SCR-SP10A

Rated 4.8 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-SCR-SP10A

Description: The Allen-Bradley 1336-SCR-SP10A Input SCR Assembly is made for the 1336 Plus, Plus II, Impact, and Force AC drives. It is compatible with the E-frame 1336 drives with 575 Volts AC voltage ratings and 150 to 300 Horsepower of output power.
Available Now
Request a quote for 1336-SCR-SP10A

Description:

The Allen-Bradley 1336-SCR-SP10A Input SCR Assembly is made for the 1336 Plus, Plus II, Impact, and Force AC drives. It is compatible with the E-frame 1336 drives with 575 Volts AC voltage ratings and 150 to 300 Horsepower of output power.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-SCR-SP10A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 6 reviews

    Technical Specifications for 1336-SCR-SP10A

BrandAllen-Bradley / Rockwell Automation
Series1336 Adjustable
Part Number1336-SCR-SP10A
DescriptionInput SCR Assembly
Voltage575 Volts AC
Power Rating150 to 300 Horse Power
FrameE
Units of Kits per Drive1
Location Within The DriveBelow The Heat Sink
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2
Series1336 Adjustable
Operating Temperature0 to 55 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP10A units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1336 Adjustable
Part Number1336-SCR-SP10A
DescriptionInput SCR Assembly
Voltage575 Volts AC
Power Rating150 to 300 Horse Power
FrameE
Units of Kits per Drive1
Location Within The DriveBelow The Heat Sink
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2
Series1336 Adjustable
Operating Temperature0 to 55 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP10A units instead of migration.

s

About 1336-SCR-SP10A

The Allen-Bradley 1336-SCR-SP10A Input SCR Assembly is an input SCR assembly for the Allen-Bradley1336 Plus, Plus II, Impact, and Force AC drives. This SCR module is located just below the bottom of the drive’s heatsink, behind the base drive mounting plate on the converter assembly of the drive. The 1336-SCR-SP10A input SCR assembly has a DC output and it helps to provide high voltage control for the drive’s applications. It is shipped as an assembly consisting of a single input SCR and installation accessories including fastening screws and a mounting plate. The 1336-SCR-SP10A assembly is compatible with 575 Volts AC rated 1336 Plus, Plus II, Impact, and Force AC drives. It is also designed for E Frame 1336 Plus, Plus II, Impact, and Force AC drives with Horsepower output ratings between 150 and 300 Horsepower.



 



The 1336-SCR-SP10A SCR assembly is installed below the gate drive board mounting plate that is close to the heatsink. To install the assembly, remove the power from the drive first, and check for voltage residue at the +DC and –DC terminals of the TB1 terminal and at the TB10, TB11, and the L option board (if installed). Remove the drive’s main circuit platform to access the SCRs. Detach the old SCR by removing the 2 screws fastening the input SCR to the drive’s converter bracket. Replace it with a new input SCR like the 1336-SCR-SP10A SCR assembly, and repeat the above processes in reverse order. Check the 1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2 troubleshooting guides for more information on the installation and removal of 1336 drive parts like this one.



Repair Services for 1336-SCR-SP10A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1336-SCR-SP10A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-SCR-SP10A

Resolutions For 1336-SCR-SP10A

About

Technical Specifications for 1336-SCR-SP10A

BrandAllen-Bradley / Rockwell Automation
Series1336 Adjustable
Part Number1336-SCR-SP10A
DescriptionInput SCR Assembly
Voltage575 Volts AC
Power Rating150 to 300 Horse Power
FrameE
Units of Kits per Drive1
Location Within The DriveBelow The Heat Sink
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2
Series1336 Adjustable
Operating Temperature0 to 55 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1336 Adjustable
Part Number1336-SCR-SP10A
DescriptionInput SCR Assembly
Voltage575 Volts AC
Power Rating150 to 300 Horse Power
FrameE
Units of Kits per Drive1
Location Within The DriveBelow The Heat Sink
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2
Series1336 Adjustable
Operating Temperature0 to 55 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP10A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP10A units instead of migration.

About 1336-SCR-SP10A

The Allen-Bradley 1336-SCR-SP10A Input SCR Assembly is an input SCR assembly for the Allen-Bradley1336 Plus, Plus II, Impact, and Force AC drives. This SCR module is located just below the bottom of the drive’s heatsink, behind the base drive mounting plate on the converter assembly of the drive. The 1336-SCR-SP10A input SCR assembly has a DC output and it helps to provide high voltage control for the drive’s applications. It is shipped as an assembly consisting of a single input SCR and installation accessories including fastening screws and a mounting plate. The 1336-SCR-SP10A assembly is compatible with 575 Volts AC rated 1336 Plus, Plus II, Impact, and Force AC drives. It is also designed for E Frame 1336 Plus, Plus II, Impact, and Force AC drives with Horsepower output ratings between 150 and 300 Horsepower.



 



The 1336-SCR-SP10A SCR assembly is installed below the gate drive board mounting plate that is close to the heatsink. To install the assembly, remove the power from the drive first, and check for voltage residue at the +DC and –DC terminals of the TB1 terminal and at the TB10, TB11, and the L option board (if installed). Remove the drive’s main circuit platform to access the SCRs. Detach the old SCR by removing the 2 screws fastening the input SCR to the drive’s converter bracket. Replace it with a new input SCR like the 1336-SCR-SP10A SCR assembly, and repeat the above processes in reverse order. Check the 1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2 troubleshooting guides for more information on the installation and removal of 1336 drive parts like this one.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP10A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF