1336-SCR-SP13A | Allen Bradley Drives 1336 Adjustable

1336-SCR-SP13A

Rated 4.3 with 4 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-SCR-SP13A

Revisions: Ser A 
Description: The Allen-Bradley 1336-SCR-SP13A SCR Assembly Kit is a common BUC (CB) SCR input assembly kit for the Allen-Bradley 1336 Impact, Force, Plus, and Plus II adjustable frequency AC drives, with a three-phase voltage rating of 460 Volts AC, and with a power rating range from the X250 rated drives to 600 Horsepower drives. The 1336-SCR-SP13A input SCR is used for the control of output power (voltage/current) via small-signal input from the drive’s main control board, and this device is located between the heatsinks on the inverter housing assembly. The 1336-SCR-SP13A SCR Assembly Kit is supplied with SCRs and a bottle of silicon oil for installation. read more...
Available Now
Request a quote for 1336-SCR-SP13A

Description: The Allen-Bradley 1336-SCR-SP13A SCR Assembly Kit is a common BUC (CB) SCR input assembly kit for the Allen-Bradley 1336 Impact, Force, Plus, and Plus II adjustable frequency AC drives, with a three-phase voltage rating of 460 Volts AC, and with a power rating range from the X250 rated drives to 600 Horsepower drives. The 1336-SCR-SP13A input SCR is used for the control of output power (voltage/current) via small-signal input from the drive’s main control board, and this device is located between the heatsinks on the inverter housing assembly. The 1336-SCR-SP13A SCR Assembly Kit is supplied with SCRs and a bottle of silicon oil for installation. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-SCR-SP13A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 4 reviews

    Technical Specifications for 1336-SCR-SP13A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP13A
DescriptionInput SCRs
Voltage460V AC
Frame ModelG
Model RatingsX250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP
Units of Kits per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP13A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP13A
DescriptionInput SCRs
Voltage460V AC
Frame ModelG
Model RatingsX250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP
Units of Kits per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP13A units instead of migration.

s

About 1336-SCR-SP13A

The Allen-Bradley 1336-SCR-SP13A SCR Assembly Kit is a common BUC (CB) SCR input assembly kit for the Allen-Bradley 1336 Impact, Force, Plus, and Plus II adjustable frequency AC drives, with a three-phase voltage rating of 460 Volts AC, and with a power rating range from the X250 rated drives to 600 Horsepower drives. The 1336-SCR-SP13A input SCR is used for the control of output power (voltage/current) via small-signal input from the drive’s main control board, and this device is located between the heatsinks on the inverter housing assembly. The 1336-SCR-SP13A SCR Assembly Kit is supplied with SCRs and a bottle of silicon oil for installation. It is installed on the drive’s heatsink by first adjusting the roll pins on each heatsink half, to extend 1.5 millimeters (0.060 inches) inward from the heatsink.



The supplied silicon oil is applied to the roll pins on the surface of the heatsink, and the lead SCR surface attached to the roll pins, and the silicon oil is also applied to every side of the SCR. The short connected heatsink SCR is attached to the longer section, with the spring bars connected, and the user-supplied nuts are fastened to the ends of the cross bars. The SCR wires are connected and the SCR gate connection is established. The 1336-SCR-SP13A SCR is tested for perfect working conditions using a testing meter set to resistance mode, and the resistance measured from AC inputs L1, L2, and L3 to +DC. The meter also measures the resistance between each pair of gate and cathode terminals on the pre-charge board, and the reading compared to the standard meter reading.



Technical Description of 1336-SCR-SP13A

Allen-Bradley Input SCRs with 460V AC power and X250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP Model Rating

Repair Services for 1336-SCR-SP13A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-SCR-SP13A

Please refer to the manual for more information about the 1336-SCR-SP13A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-SCR-SP13A Ser A
1336-SCR-SP13A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-SCR-SP13A
  • 1336-SCR-SPl3A
  • 1336SCRSP13A

Dimensions For 1336-SCR-SP13A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-SCR-SP13A

Resolutions For 1336-SCR-SP13A

About

Technical Specifications for 1336-SCR-SP13A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP13A
DescriptionInput SCRs
Voltage460V AC
Frame ModelG
Model RatingsX250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP
Units of Kits per Drive1
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP13A
DescriptionInput SCRs
Voltage460V AC
Frame ModelG
Model RatingsX250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP
Units of Kits per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP13A units instead of migration.

About 1336-SCR-SP13A

The Allen-Bradley 1336-SCR-SP13A SCR Assembly Kit is a common BUC (CB) SCR input assembly kit for the Allen-Bradley 1336 Impact, Force, Plus, and Plus II adjustable frequency AC drives, with a three-phase voltage rating of 460 Volts AC, and with a power rating range from the X250 rated drives to 600 Horsepower drives. The 1336-SCR-SP13A input SCR is used for the control of output power (voltage/current) via small-signal input from the drive’s main control board, and this device is located between the heatsinks on the inverter housing assembly. The 1336-SCR-SP13A SCR Assembly Kit is supplied with SCRs and a bottle of silicon oil for installation. It is installed on the drive’s heatsink by first adjusting the roll pins on each heatsink half, to extend 1.5 millimeters (0.060 inches) inward from the heatsink.



The supplied silicon oil is applied to the roll pins on the surface of the heatsink, and the lead SCR surface attached to the roll pins, and the silicon oil is also applied to every side of the SCR. The short connected heatsink SCR is attached to the longer section, with the spring bars connected, and the user-supplied nuts are fastened to the ends of the cross bars. The SCR wires are connected and the SCR gate connection is established. The 1336-SCR-SP13A SCR is tested for perfect working conditions using a testing meter set to resistance mode, and the resistance measured from AC inputs L1, L2, and L3 to +DC. The meter also measures the resistance between each pair of gate and cathode terminals on the pre-charge board, and the reading compared to the standard meter reading.



Technical Description of 1336-SCR-SP13A

Allen-Bradley Input SCRs with 460V AC power and X250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP Model Rating
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-SCR-SP13A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-SCR-SP13A Ser A
1336-SCR-SP13A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-SCR-SP13A
  • 1336-SCR-SPl3A
  • 1336SCRSP13A
PDF