Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 Adjustable 1336-SCR-SP14A

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-SCR-SP14A

|
Need a Specific Revision?

The Allen-Bradley 1336-SCR-SP14A input SCR assembly is made for theĀ 1336 Plus, Plus II, Impact, and Force AC drives. It is compatible with the G-frame 1336 drives with 575 Volts AC voltage ratings and 300 to 650 Horsepower output power ratings.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-SCR-SP14A

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 Adjustable
Part Number1336-SCR-SP14A
Weight1.38 lbs (0.62 kg)
DescriptionInput SCR Assembly
Voltage575 Volts AC
Power Rating300 to 650 Horsepower
FrameG
Units of Kits per Drive1
Location Within The DriveBelow The Heat Sink
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2Ć¢Ā€Ā troubleshooting guide
Operating Temperature0 to 50 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-SCR-SP14A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP14A units instead of migration.

Request a Repair

The Allen-Bradley 1336-SCR-SP14A input SCR assembly kit is an input SCR assembly kit containing a spare input SCR assembly for the Allen-Bradley Plus, Force, Plus II, and Impact drives. It provides high voltage control for the converter module of the drives, and it is located below the heatsink at the converter end of the drive. The 1336-SCR-SP14A input SCR assembly is supplied as an assembly kit contacting installation accessories and a 1-piece input SCR. The 1336-SCR-SP14A input SCR assembly is designed for the G-frameĀ drives with operating voltage ratings of 575 Volts AC, and withĀ output power ranges of 300 to 650 Horsepower.

The 1336-SCR-SP14A input SCR assembly is tested forĀ optimal conditions by using a testing meter and comparing the SCR readings to the standard table readings, and replacingĀ the input SCR if the reading does not match the table reading. To replace a damaged SCR, turn off the power to the drive and check for zero voltage at the TB1 (-DC and +DC) terminals. Check for any residual control voltage at the TB10, TB11, and the L-option board terminals (if there are any). Remove the gate driveĀ board and control board mounting plates to gain access to the board. Remove the J1 connector on the board and remove the fastening screws holding the board to the driveā€™s converter bracket. Replace the old input SCR with the spare 1336-SCR-SP14A input SCR assembly, and couple the drive in the reverse order of the removal process. More information on installing the 1336-SCR-SP14A input SCR assembly and other Allen-Bradley 1336 drive components can be found in the 1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2Ā troubleshooting guides.