1336-SCR-SP7A | Allen Bradley Drives 1336 Adjustable

1336-SCR-SP7A

Rated 4.5 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-SCR-SP7A

Revisions: Ser A 
Description: The Allen-Bradley 1336-SCR-SP7A is an input SCR with 460V AC voltage. It is an E Frame model with model ratings of 150 HP, 200 HP, and 250 HP. It also has 3 units of kits per drive. While preparing for the initial startup, confirm the installation of the 1336-SCR-SP7A according to the manual. read more...
Available Now
Request a quote for 1336-SCR-SP7A

Description: The Allen-Bradley 1336-SCR-SP7A is an input SCR with 460V AC voltage. It is an E Frame model with model ratings of 150 HP, 200 HP, and 250 HP. It also has 3 units of kits per drive. While preparing for the initial startup, confirm the installation of the 1336-SCR-SP7A according to the manual. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-SCR-SP7A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 6 reviews

    Technical Specifications for 1336-SCR-SP7A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP7A
DescriptionInput SCRs
Voltage460V AC
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP7A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP7A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP7A
DescriptionInput SCRs
Voltage460V AC
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP7A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP7A units instead of migration.

s

About 1336-SCR-SP7A

The Allen-Bradley 1336-SCR-SP7A is an input SCR with 460V AC voltage. It is an E Frame model with model ratings of 150 HP, 200 HP, and 250 HP. It also has 3 units of kits per drive. While preparing for the initial startup, confirm the installation of the 1336-SCR-SP7A according to the manual. All the inputs should be confirmed to be at the correct terminals and should be secure. The AC line power at the disconnect device should be within the drive’s rated value. The user also needs to ensure that the control power of the voltage is correct. The requirement of the rest of the procedure needs the human interface module to be connected to the DPI Port 1 or 2.





The next step involves applying the AC power and the control voltages of the 1336-SCR-SP7A to the drive. Refer to the part of the drive status in the manual if the STS light-emitting diode has not shown the flashing green color. Select a display language when prompted. For drives which had not been previously configured, the start-up screen will automatically be displayed. Press the enter key if the start-up key has not been displayed. For highlighting “2. Basic”, the up/down key is to be used. Lastly, press the enter key which directs the user through the start-up routine. Here the routine will ask a few simple questions that will prompt the user to put the required information.





The File Group Parameter has the ability to simplify programming by simply grouping parameters which are supposed to be used for the same functions. It is comprised of 11 files altogether and each file is also divided into several groups of parameters.

Technical Description of 1336-SCR-SP7A

Allen-Bradley Input SCRs with 460V AC power and 150 HP, 200 HP, 250 HP Model Rating

Repair Services for 1336-SCR-SP7A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP7A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-SCR-SP7A

Please refer to the manual for more information about the 1336-SCR-SP7A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-SCR-SP7A Ser A
1336-SCR-SP7A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-SCR-SP7A
  • 1336SCRSP7A

Dimensions For 1336-SCR-SP7A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-SCR-SP7A

Resolutions For 1336-SCR-SP7A

About

Technical Specifications for 1336-SCR-SP7A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP7A
DescriptionInput SCRs
Voltage460V AC
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-SCR-SP7A
DescriptionInput SCRs
Voltage460V AC
Frame ModelE
Model Ratings150 HP, 200 HP, 250 HP
Units of Kits per Drive3
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SCR-SP7A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SCR-SP7A units instead of migration.

About 1336-SCR-SP7A

The Allen-Bradley 1336-SCR-SP7A is an input SCR with 460V AC voltage. It is an E Frame model with model ratings of 150 HP, 200 HP, and 250 HP. It also has 3 units of kits per drive. While preparing for the initial startup, confirm the installation of the 1336-SCR-SP7A according to the manual. All the inputs should be confirmed to be at the correct terminals and should be secure. The AC line power at the disconnect device should be within the drive’s rated value. The user also needs to ensure that the control power of the voltage is correct. The requirement of the rest of the procedure needs the human interface module to be connected to the DPI Port 1 or 2.





The next step involves applying the AC power and the control voltages of the 1336-SCR-SP7A to the drive. Refer to the part of the drive status in the manual if the STS light-emitting diode has not shown the flashing green color. Select a display language when prompted. For drives which had not been previously configured, the start-up screen will automatically be displayed. Press the enter key if the start-up key has not been displayed. For highlighting “2. Basic”, the up/down key is to be used. Lastly, press the enter key which directs the user through the start-up routine. Here the routine will ask a few simple questions that will prompt the user to put the required information.





The File Group Parameter has the ability to simplify programming by simply grouping parameters which are supposed to be used for the same functions. It is comprised of 11 files altogether and each file is also divided into several groups of parameters.

Technical Description of 1336-SCR-SP7A

Allen-Bradley Input SCRs with 460V AC power and 150 HP, 200 HP, 250 HP Model Rating
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP7A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SCR-SP7A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-SCR-SP7A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-SCR-SP7A Ser A
1336-SCR-SP7A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-SCR-SP7A
  • 1336SCRSP7A
PDF