1336-WC085 | Allen Bradley Drives 1336 Adjustable

1336-WC085

Rated 4.9 with 2 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-WC085

Revisions: Ser A 
Description: The 1336-WC085 is a dynamic brake chopper from Allen-Bradley. It has an AC voltage rating of 575 Volts AC. It also has a DC continuous Amp rating of 935 Volts DC. The 1336-WC085 brake chopper has an Insulated Gate Bipolar Chopper Transistor (IGBT). read more...
Call
Request a quote for 1336-WC085

Description: The 1336-WC085 is a dynamic brake chopper from Allen-Bradley. It has an AC voltage rating of 575 Volts AC. It also has a DC continuous Amp rating of 935 Volts DC. The 1336-WC085 brake chopper has an Insulated Gate Bipolar Chopper Transistor (IGBT). read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-WC085.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 2 reviews

    Technical Specifications for 1336-WC085

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-WC085
DescriptionDynamic Brake Chopper
Voltage Rating575V AC
Continuous Amp Rating935V DC
Chopper TransistorInsulated Gate Bipolar (IGBT)
Brake FaultTTL Compatible
FuseF1 & F2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-WC085 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-WC085 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-WC085
DescriptionDynamic Brake Chopper
Voltage Rating575V AC
Continuous Amp Rating935V DC
Chopper TransistorInsulated Gate Bipolar (IGBT)
Brake FaultTTL Compatible
FuseF1 & F2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-WC085 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-WC085 units instead of migration.

s

About 1336-WC085

The 1336-WC085 is a dynamic brake chopper from Allen-Bradley. It has an AC voltage rating of 575 Volts AC. It also has a DC continuous Amp rating of 935 Volts DC. The 1336-WC085 brake chopper has an Insulated Gate Bipolar Chopper Transistor (IGBT). It also has a TTL compatible brake fault along with two fuses, F1 and F2. The 1336-WC085 dynamic brake chopper is a braking transistor that is used together with AC drives to allow for full power braking and also to overcome overvoltage faults. The 1336-WC085 dynamic brake chopper eliminates overvoltage faults by diverting the excess energy through an external braking resistor.



For simple installations, it is recommended to ensure that there is ground fault protection during startup and running since this assures reliable operation. The cable recommendations required when installing this brake chopper need to be copper wire with an insulation rating of 600 Volts or greater. The 1336-WC085 dynamic brake chopper, like the other braking modules, increases the braking torque capability of a variable frequency drive and servo systems, thereby allowing for faster and more controlled deceleration. When the regenerative energy is dissipated, the 1336-WC085 brake chopper can be specified. Information must be collected and findings to be considered in order for an appropriate selection of the correct dynamic brake chopper for the users' application. The chopper transistor may be damaged if the minimum dynamic brake resistance that is applied is less than the minimum imposed by the chopper module's choice or preference.



Technical Description of 1336-WC085

Allen-Bradley Dynamic Brake Chopper with 575V AC Voltage Rating and 935V DC Continuous Voltage

Repair Services for 1336-WC085

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-WC085. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-WC085

Please refer to the manual for more information about the 1336-WC085 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-WC085 Ser A
1336-WC085/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-WC085
  • 1336-WCo85
  • 1336-WC0b5
  • 1336WC085

Dimensions For 1336-WC085

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-WC085

Resolutions For 1336-WC085

About

Technical Specifications for 1336-WC085

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-WC085
DescriptionDynamic Brake Chopper
Voltage Rating575V AC
Continuous Amp Rating935V DC
Chopper TransistorInsulated Gate Bipolar (IGBT)
Brake FaultTTL Compatible
FuseF1 & F2
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336-WC085
DescriptionDynamic Brake Chopper
Voltage Rating575V AC
Continuous Amp Rating935V DC
Chopper TransistorInsulated Gate Bipolar (IGBT)
Brake FaultTTL Compatible
FuseF1 & F2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-WC085 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-WC085 units instead of migration.

About 1336-WC085

The 1336-WC085 is a dynamic brake chopper from Allen-Bradley. It has an AC voltage rating of 575 Volts AC. It also has a DC continuous Amp rating of 935 Volts DC. The 1336-WC085 brake chopper has an Insulated Gate Bipolar Chopper Transistor (IGBT). It also has a TTL compatible brake fault along with two fuses, F1 and F2. The 1336-WC085 dynamic brake chopper is a braking transistor that is used together with AC drives to allow for full power braking and also to overcome overvoltage faults. The 1336-WC085 dynamic brake chopper eliminates overvoltage faults by diverting the excess energy through an external braking resistor.



For simple installations, it is recommended to ensure that there is ground fault protection during startup and running since this assures reliable operation. The cable recommendations required when installing this brake chopper need to be copper wire with an insulation rating of 600 Volts or greater. The 1336-WC085 dynamic brake chopper, like the other braking modules, increases the braking torque capability of a variable frequency drive and servo systems, thereby allowing for faster and more controlled deceleration. When the regenerative energy is dissipated, the 1336-WC085 brake chopper can be specified. Information must be collected and findings to be considered in order for an appropriate selection of the correct dynamic brake chopper for the users' application. The chopper transistor may be damaged if the minimum dynamic brake resistance that is applied is less than the minimum imposed by the chopper module's choice or preference.



Technical Description of 1336-WC085

Allen-Bradley Dynamic Brake Chopper with 575V AC Voltage Rating and 935V DC Continuous Voltage
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-WC085. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-WC085. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-WC085 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-WC085 Ser A
1336-WC085/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-WC085
  • 1336-WCo85
  • 1336-WC0b5
  • 1336WC085
PDF