The 1336E-A007-AA-EN-HA2 drive is a 1336 impact drive manufactured by Allen-Bradley/Rockwell Automation. It is an adjustable frequency AC drive with a voltage rating of 380 to 480 Volts AC or 620 Volts DC. The total Horsepower output power of the drive under normal working conditions is 5 Horsepower. The exterior body of the drive is conformally coated and it has an IP20 rated NEMA Type 1 enclosure. The enclosure is not water-resistant from water sprays and splashes. The drive is built to perform in an indoor location. The 1336E-A007-AA-EN-HA2 uses English as the primary language of communication. For communication between the drive and the users, a human-machine interface module is equipped with this drive. The interface module comes with a programmer controller with a digital pot. The drive is used for high-performance speed and torque control. It uses a motor control algorithm known as the FORCE technology which provides accurate motor speed and torque regulation.

The 1336E-A007-AA-EN-HA2 drive can easily handle the most demanding torque requirements. This motor control algorithm provides direct control of torque over the entire speed range and the base speed of the motor device. The 1336E-A007-AA-EN-HA2 drive requires an ambient operating temperature range between 0 and 40 degrees Celsius because it comes with an IP20 enclosure. When the drive is not going to be used for a long period of time, the drive can be stored at a temperature range between -40 and 70 degrees Celsius. The relative humidity of the environment should be 5 to 95%, non-condensing. The 1336E-A007-AA-EN-HA2 has been certified with different standard rating including CSA and the UL. During the installation of the drive, it should be protected from the electrical discharge that is generated by the static electricity which can damage the metallic oxide semiconductor on the drive board.