1336E-B015-AN-EN-HA2-L8E | Allen Bradley Drives 1336 IMPACT Drives

1336E-B015-AN-EN-HA2-L8E

Rated 4.3 with 4 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-B015-AN-EN-HA2-L8E

Revisions: Ser A 
Description: The 1336E-B015-AN-EN-HA2-L8E drive is an AC-powered adjustable frequency drive. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 1336 IMPACT series. The 1336E-B015-AN-EN-HA2-L8E adjustable frequency drive operates in English with 380 to 480 Volts AC input voltage at 50 to 60 Hertz frequency. Its maximum rated output power is 15 Horsepower or 11 kilowatts. The 1336E-B015-AN-EN-HA2-L8E adjustable frequency drive comes with an HMI for programming and controlling the drive directly and with a 24 Volts AC/DC rated control interface that has encoder feedback.
Available Now
Request a quote for 1336E-B015-AN-EN-HA2-L8E

Description: The 1336E-B015-AN-EN-HA2-L8E drive is an AC-powered adjustable frequency drive. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 1336 IMPACT series. The 1336E-B015-AN-EN-HA2-L8E adjustable frequency drive operates in English with 380 to 480 Volts AC input voltage at 50 to 60 Hertz frequency. Its maximum rated output power is 15 Horsepower or 11 kilowatts. The 1336E-B015-AN-EN-HA2-L8E adjustable frequency drive comes with an HMI for programming and controlling the drive directly and with a 24 Volts AC/DC rated control interface that has encoder feedback.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-B015-AN-EN-HA2-L8E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 4 reviews

    Technical Specifications for 1336E-B015-AN-EN-HA2-L8E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-B015-AN-EN-HA2-L8E
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage11
Horsepower15
Enclosure TypeOpen (IP00)
LanguageEnglish
Human Interface OptionController with Digital Pot
Control Interface Options24VAC & Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-B015-AN-EN-HA2-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-B015-AN-EN-HA2-L8E units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-B015-AN-EN-HA2-L8E
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage11
Horsepower15
Enclosure TypeOpen (IP00)
LanguageEnglish
Human Interface OptionController with Digital Pot
Control Interface Options24VAC & Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-B015-AN-EN-HA2-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-B015-AN-EN-HA2-L8E units instead of migration.

s

About 1336E-B015-AN-EN-HA2-L8E

The 1336E-B015-AN-EN-HA2-L8E drive from Rockwell Automation/Allen-Bradley falls under the 1336 IMPACT adjustable frequency AC drives. The part numbers of the modules in this family carry all the information of the particular part. For example, for the 1336E-B015-AN-EN-HA2-L8E, the bulletin number is indicated by the first part, “1336E.” “B” indicates that the module should be operated at a voltage ranging from 380 Volts to 480 Volts AC, “015” is a code to indicate that the module has a Horsepower of 15 Horsepower, and “AN” shows that the 1336E-B015-AN-EN-HA2-L8E module is to be installed in an IP00 open type enclosure. Additionally, the “EN” in the part number indicates that the module supports the English language only, the “HA2” indicates that the module has programmer/controller with a digital pot. Lastly, the “L8E” in the 1336E-B015-AN-EN-HA2-L8E indicates that the module supports the control interface options with 24 Volts AC or DC and encoder feedback.



As with other 1336 IMPACT modules, the 1336E-B015-AN-EN-HA2-L8E module has inverter overload protection, overspeed detection, programmable stall detection, ground fault monitoring, peak output current monitoring, and heatsink temperature monitoring. Also, it has motor overspeed protection and an internal voltage reflection reduction mechanism. To minimize voltage reflections, it is recommended not to use overly long cables when installing the 1336E-B015-AN-EN-HA2-L8E. The 1336 IMPACT drives have built-in mechanisms that automatically reduce the effects of the reflected wave by allowing the wave to decay before reaching the motor terminals. This also prevents overvoltage at the motor terminals. When mounting the 1336E-B015-AN-EN-HA2-L8E module in an I/O chassis, follow the spacing guidelines to ensure maximum ventilation.



Technical Description of 1336E-B015-AN-EN-HA2-L8E

Allen-Bradley 1336 Impact Drive with 380-480V AC input voltage and a power rating of 15 horsepower

Repair Services for 1336E-B015-AN-EN-HA2-L8E

Type Lead Time Price Action
Repair Service 2-4 weeks $7150cartAdd to Cart
Our highly skilled technicians can repair your 1336E-B015-AN-EN-HA2-L8E. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-B015-AN-EN-HA2-L8E

Please refer to the manual for more information about the 1336E-B015-AN-EN-HA2-L8E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-B015-AN-EN-HA2-L8E Ser A
1336E-B015-AN-EN-HA2-L8E/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-B015-AN-EN-HA2-L8E
  • 1336E-8015-AN-EN-HA2-L8E
  • 1336E-Bo15-AN-EN-HA2-L8E
  • 1336E-B0l5-AN-EN-HA2-L8E
  • 1336E-B015-AN-EN-HA2-18E
  • 1336E-B015-AN-EN-HA2-LbE
  • 1336EB015ANENHA2L8E

Dimensions For 1336E-B015-AN-EN-HA2-L8E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-B015-AN-EN-HA2-L8E

Resolutions For 1336E-B015-AN-EN-HA2-L8E

About

Technical Specifications for 1336E-B015-AN-EN-HA2-L8E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-B015-AN-EN-HA2-L8E
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage11
Horsepower15
Enclosure TypeOpen (IP00)
LanguageEnglish
Human Interface OptionController with Digital Pot
Control Interface Options24VAC & Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-B015-AN-EN-HA2-L8E
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage11
Horsepower15
Enclosure TypeOpen (IP00)
LanguageEnglish
Human Interface OptionController with Digital Pot
Control Interface Options24VAC & Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-B015-AN-EN-HA2-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-B015-AN-EN-HA2-L8E units instead of migration.

About 1336E-B015-AN-EN-HA2-L8E

The 1336E-B015-AN-EN-HA2-L8E drive from Rockwell Automation/Allen-Bradley falls under the 1336 IMPACT adjustable frequency AC drives. The part numbers of the modules in this family carry all the information of the particular part. For example, for the 1336E-B015-AN-EN-HA2-L8E, the bulletin number is indicated by the first part, “1336E.” “B” indicates that the module should be operated at a voltage ranging from 380 Volts to 480 Volts AC, “015” is a code to indicate that the module has a Horsepower of 15 Horsepower, and “AN” shows that the 1336E-B015-AN-EN-HA2-L8E module is to be installed in an IP00 open type enclosure. Additionally, the “EN” in the part number indicates that the module supports the English language only, the “HA2” indicates that the module has programmer/controller with a digital pot. Lastly, the “L8E” in the 1336E-B015-AN-EN-HA2-L8E indicates that the module supports the control interface options with 24 Volts AC or DC and encoder feedback.



As with other 1336 IMPACT modules, the 1336E-B015-AN-EN-HA2-L8E module has inverter overload protection, overspeed detection, programmable stall detection, ground fault monitoring, peak output current monitoring, and heatsink temperature monitoring. Also, it has motor overspeed protection and an internal voltage reflection reduction mechanism. To minimize voltage reflections, it is recommended not to use overly long cables when installing the 1336E-B015-AN-EN-HA2-L8E. The 1336 IMPACT drives have built-in mechanisms that automatically reduce the effects of the reflected wave by allowing the wave to decay before reaching the motor terminals. This also prevents overvoltage at the motor terminals. When mounting the 1336E-B015-AN-EN-HA2-L8E module in an I/O chassis, follow the spacing guidelines to ensure maximum ventilation.



Technical Description of 1336E-B015-AN-EN-HA2-L8E

Allen-Bradley 1336 Impact Drive with 380-480V AC input voltage and a power rating of 15 horsepower
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $7150cartAdd to Cart
Our highly skilled technicians can repair your 1336E-B015-AN-EN-HA2-L8E. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks $7150cartAdd to Cart
Our highly skilled technicians can repair your 1336E-B015-AN-EN-HA2-L8E. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1336E-B015-AN-EN-HA2-L8E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-B015-AN-EN-HA2-L8E Ser A
1336E-B015-AN-EN-HA2-L8E/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-B015-AN-EN-HA2-L8E
  • 1336E-8015-AN-EN-HA2-L8E
  • 1336E-Bo15-AN-EN-HA2-L8E
  • 1336E-B0l5-AN-EN-HA2-L8E
  • 1336E-B015-AN-EN-HA2-18E
  • 1336E-B015-AN-EN-HA2-LbE
  • 1336EB015ANENHA2L8E
PDF