1336E-B030-AA-EN

The 1336E-B030-AA-EN is an adjustable frequency AC drive from Allen-Bradley. This drive is part of the 1336 Impact series, capable of Field oriented Control (FOC), Current regulated, and sine code Pulse With Modulation (PWM). This drive is mainly used for speed and torque control as well as protective motor start-up and shutdown. The 1336E-B030-AA-EN is rated 380-480 VAC, 3-Phase and provides an output rating include 0-480VAC, 3-Phase voltage, and output power of 22 kW or 30 HP with an enclosure rating of NEMA 1 (IP20). It comes with SCANPort communication interfaces for connecting with configuration tools and other devices that support the same protocol. The 1336E-B030-AA-EN is also capable of implementing soft-starter functions as this drive supports flux braking, DC braking, and DC bus regulation, DC hold, 200/400% motor curve, S-Curve, Autostart including auto-restart and power upstart and start/stop dwells. Optional components that can be installed to this drive include a dynamic braking resistor, AC motor contactor, L option board for interfacing encoders, human Interface Module (HIM), graphics Programming Terminal (GPT), and gateway module from the 1203 product series. The drive’s integrated protective features include programmable overload ((I2T), inverter overload protection, Overspeed detection, programmable stall detection, peak output current monitoring, ground fault monitoring, DC Bus voltage monitoring, power structure heatsink monitoring, Overspeed, and internal voltage reflection reduction.

The Allen-Bradley 1336E-B030-AA-EN drive is a variable drive that employs a standalone voltage rating of 380 to 480 Volts AC it is used to manage and control induction motors. This drive has been included in the 1336 impact series of drives by Allen-Bradley. The voltage used by this drive is a three-phase voltage. This variable drive provides an overload capability of 100% when operating in a continuous mode and in a minute, it can reach 150%. It comes with an open enclosure. The Allen-Bradley 1336E-B030-AA-EN variable drive is intended to be mounted in a clean environment without any corrosive materials that can cause different types of damage to the drive’s structure. It is also important to keep the drive in a space that is located in indoor environments since the contact with liquids that come from adverse weather conditions can cause irreversible damage to the drive. Extremely strong ultraviolet light originated from daylight can cause irreversible damages too. The Allen-Bradley 1336E-B030-AA-EN variable drive comes programmed in English by default. Users can modify this language by adding an Allen-Bradley language pack to the drive. It is recommended to attach any kind of human-machine interface to the drive.