1336E-BRF10-AA-EN | Allen Bradley Drives 1336 IMPACT Drives

1336E-BRF10-AA-EN

Rated 4.8 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-BRF10-AA-EN

Revisions: Ser A 
Description: The 1336E-BRF10-AA-EN drive is an AC and DC-powered adjustable frequency drive. It has been manufactured by Allen-Bradley/Rockwell Automation as part of the 1336 IMPACT drives series. The 1336E-BRF10-AA-EN adjustable frequency drive’s input voltage ratings are 380 to 480 Volts AC and 513 to +/-620 Volts DC. It is equipped with an IP 20 rated enclosure for protection and an English language module that causes it to operate and to display menus and data in the English language. The 1336E-BRF10-AA-EN adjustable frequency drive does not come with built-in interfaces, but it is compatible with a variety of optional external interface modules that can be ordered separately and connected to it.
Available Now
Request a quote for 1336E-BRF10-AA-EN

Description: The 1336E-BRF10-AA-EN drive is an AC and DC-powered adjustable frequency drive. It has been manufactured by Allen-Bradley/Rockwell Automation as part of the 1336 IMPACT drives series. The 1336E-BRF10-AA-EN adjustable frequency drive’s input voltage ratings are 380 to 480 Volts AC and 513 to +/-620 Volts DC. It is equipped with an IP 20 rated enclosure for protection and an English language module that causes it to operate and to display menus and data in the English language. The 1336E-BRF10-AA-EN adjustable frequency drive does not come with built-in interfaces, but it is compatible with a variety of optional external interface modules that can be ordered separately and connected to it.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-BRF10-AA-EN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 8 reviews

    Technical Specifications for 1336E-BRF10-AA-EN

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AA-EN
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage0.75
Horsepower1
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AA-EN has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AA-EN units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AA-EN
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage0.75
Horsepower1
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AA-EN has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AA-EN units instead of migration.

s

About 1336E-BRF10-AA-EN

The Allen-Bradley 1336E-BRF10-AA-EN Impact Adjustable Frequency AC Drive is a Variable Frequency AC Drive in the Allen-Bradley 1336 IMPACT Drive Family with Digital Setup and Field Oriented Control, which provides microprocessor motor control in a wide range of industrial applications with torque control requirements. The 1336E-BRF10-AA-EN features high-performance digital speed loops, with a microprocessor current control for the bumpless speed and torque control, and it has built-in protective features like programmable Electronic Motor Protection using an I2T Algorithm, and also programmable Stall protection. It has an AC/DC line input voltage range of 380 to 480V AC or at 513 to ±620V DC, with 0.75kW (1.0HP) Drive rating, and it has a real power input and output ratings of 2.96KVA at 2.8A, and 1.83KVA at 2.83A. The 1336E-BRF10-AA-EN has a line input tolerance of -15%/+10% at 47 to 63Hz frequency tolerance range, and it has a maximum short-circuit rating of 200,000A. It provides DC BUS over voltage and under voltage monitoring, with phase-to-phase and phase-to-ground protection to prevent excessive output current, and it provides over-temperature monitoring with the Heatsink. The 1336E-BRF10-AA-EN offers a 150% overload capability for 1 minute, with an overcurrent limit of up to 400% of the rated current, and it has a wide power loss ride-through time of 2s.





The 1336E-BRF10-AA-EN employs the Force technology with field-oriented control and current regulation loop for motor control, and it uses the Sinusoidal (PWM) output waveform with a programmable carrier frequency of 4 KHz for the output control. It offers ±0.5% speed control without an encoder across a 120: 1-speed range, with a ±5% torque regulation without an encoder, and it has programmable acceleration/deceleration times, programmable from 0 to 6553s in 0.1s increments. The 1336E-BRF10-AA-EN has two 12-bit, ±10V Analog inputs, two 12-bit, ±10V Analog outputs, and one 12-bit, 4 to 20mA output with 273 Ohms impedance. It has English as its only language option, and it has an IP20 (NEMA Type 1) enclosure rating. The 1336E-BRF10-AA-EN is designed to operate at a temperature range of 0 to 40°C (32 to 104°F) and a relative humidity range of 5 to 95% non-condensing, without de-rating, and it has a storage temperature range of -40 to 70°C (-40 to 158°F). It can resist a 15G operating shock for 11ms, with a 1G peak vibration, and it can operate without de-rating at an altitude of 1000m. The 1336E-BRF10-AA-EN is a Frame A1 drive with a net shipping weight of 4.31Kg, and total shipping dimensions of 215.9mm x 290.0mm x 160.0mm.



Technical Description of 1336E-BRF10-AA-EN

Allen-Bradley 1336 Impact Drive with 380-480V AC input voltage and a power rating of 1 horsepower

Repair Services for 1336E-BRF10-AA-EN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336E-BRF10-AA-EN. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-BRF10-AA-EN

Please refer to the manual for more information about the 1336E-BRF10-AA-EN such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AA-EN Ser A
1336E-BRF10-AA-EN/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-BRF10-AA-EN
  • 1336E-8RF10-AA-EN
  • 1336E-BRFl0-AA-EN
  • 1336E-BRF1o-AA-EN
  • 1336EBRF10AAEN

Dimensions For 1336E-BRF10-AA-EN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-BRF10-AA-EN

Resolutions For 1336E-BRF10-AA-EN

About

Technical Specifications for 1336E-BRF10-AA-EN

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AA-EN
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage0.75
Horsepower1
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AA-EN
Product Line1336 IMPACT
Input Voltage380-480V AC
Wattage0.75
Horsepower1
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AA-EN has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AA-EN units instead of migration.

About 1336E-BRF10-AA-EN

The Allen-Bradley 1336E-BRF10-AA-EN Impact Adjustable Frequency AC Drive is a Variable Frequency AC Drive in the Allen-Bradley 1336 IMPACT Drive Family with Digital Setup and Field Oriented Control, which provides microprocessor motor control in a wide range of industrial applications with torque control requirements. The 1336E-BRF10-AA-EN features high-performance digital speed loops, with a microprocessor current control for the bumpless speed and torque control, and it has built-in protective features like programmable Electronic Motor Protection using an I2T Algorithm, and also programmable Stall protection. It has an AC/DC line input voltage range of 380 to 480V AC or at 513 to ±620V DC, with 0.75kW (1.0HP) Drive rating, and it has a real power input and output ratings of 2.96KVA at 2.8A, and 1.83KVA at 2.83A. The 1336E-BRF10-AA-EN has a line input tolerance of -15%/+10% at 47 to 63Hz frequency tolerance range, and it has a maximum short-circuit rating of 200,000A. It provides DC BUS over voltage and under voltage monitoring, with phase-to-phase and phase-to-ground protection to prevent excessive output current, and it provides over-temperature monitoring with the Heatsink. The 1336E-BRF10-AA-EN offers a 150% overload capability for 1 minute, with an overcurrent limit of up to 400% of the rated current, and it has a wide power loss ride-through time of 2s.





The 1336E-BRF10-AA-EN employs the Force technology with field-oriented control and current regulation loop for motor control, and it uses the Sinusoidal (PWM) output waveform with a programmable carrier frequency of 4 KHz for the output control. It offers ±0.5% speed control without an encoder across a 120: 1-speed range, with a ±5% torque regulation without an encoder, and it has programmable acceleration/deceleration times, programmable from 0 to 6553s in 0.1s increments. The 1336E-BRF10-AA-EN has two 12-bit, ±10V Analog inputs, two 12-bit, ±10V Analog outputs, and one 12-bit, 4 to 20mA output with 273 Ohms impedance. It has English as its only language option, and it has an IP20 (NEMA Type 1) enclosure rating. The 1336E-BRF10-AA-EN is designed to operate at a temperature range of 0 to 40°C (32 to 104°F) and a relative humidity range of 5 to 95% non-condensing, without de-rating, and it has a storage temperature range of -40 to 70°C (-40 to 158°F). It can resist a 15G operating shock for 11ms, with a 1G peak vibration, and it can operate without de-rating at an altitude of 1000m. The 1336E-BRF10-AA-EN is a Frame A1 drive with a net shipping weight of 4.31Kg, and total shipping dimensions of 215.9mm x 290.0mm x 160.0mm.



Technical Description of 1336E-BRF10-AA-EN

Allen-Bradley 1336 Impact Drive with 380-480V AC input voltage and a power rating of 1 horsepower
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336E-BRF10-AA-EN. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336E-BRF10-AA-EN. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1336E-BRF10-AA-EN such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AA-EN Ser A
1336E-BRF10-AA-EN/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-BRF10-AA-EN
  • 1336E-8RF10-AA-EN
  • 1336E-BRFl0-AA-EN
  • 1336E-BRF1o-AA-EN
  • 1336EBRF10AAEN
PDF