1336E-BRF10-AN-EN-HA2-L9E | Allen Bradley Drives 1336 IMPACT Drives

1336E-BRF10-AN-EN-HA2-L9E

Rated 5 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-BRF10-AN-EN-HA2-L9E

Revisions: Ser A 
Description: The 1336E-BRF10-AN-EN-HA2-L9E drive is an Allen-Bradley/Rockwell Automation 1336 IMPACT series adjustable frequency drive. It can increase or decrease the speed and torque of a motor by increasing or decreasing the frequency level that it applies to the motor. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency drive can operate with an input voltage range of 380 to 480 Volts AC or 513 to +/-620 Volts DC. It generates 0.75 kilowatts or 1 Horsepower of maximum output power during normal operation. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency drive comes with a control interface and a human-machine interface that both operate in English.
Available Now
Request a quote for 1336E-BRF10-AN-EN-HA2-L9E

Description: The 1336E-BRF10-AN-EN-HA2-L9E drive is an Allen-Bradley/Rockwell Automation 1336 IMPACT series adjustable frequency drive. It can increase or decrease the speed and torque of a motor by increasing or decreasing the frequency level that it applies to the motor. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency drive can operate with an input voltage range of 380 to 480 Volts AC or 513 to +/-620 Volts DC. It generates 0.75 kilowatts or 1 Horsepower of maximum output power during normal operation. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency drive comes with a control interface and a human-machine interface that both operate in English.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-BRF10-AN-EN-HA2-L9E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 9 reviews

    Technical Specifications for 1336E-BRF10-AN-EN-HA2-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HA2-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HA2Programmer/Controller with a Digital Pot
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HA2-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HA2-L9E units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HA2-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HA2Programmer/Controller with a Digital Pot
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HA2-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HA2-L9E units instead of migration.

s

About 1336E-BRF10-AN-EN-HA2-L9E

The Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive provides a voltage range of 513 to 620 Volts DC and 380 to 480 Volts AC. This drive also operates with a frequency of 50 to 60 Hertz and a Horsepower rating of 1 Horsepower. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive has an open enclosure that provides its own mounting mechanism. This enclosure enables the drive to withstand a temperature of 50 degrees Celsius. Still, when mounting the drive, clearances of 6 inches on each side must be respected. Once the 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive has been installed but prior to the start-up, the users need to make sure that no damage has occurred during the shipment or during the mounting process. All jumpers and controls must be properly placed in order to guarantee a safe programming and safe start-up.



It is also important for the voltage input to be checked and to make sure that all the motor connections are properly sized and tightened before putting the Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive into operation. These recommendations are useful in order to prevent the drive from suffering any damages as a result of poor connections. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive includes a programmer and controller that comes with a digital pot, and it also includes a control interface that operates with a voltage of 115 Volts AC that includes encoder feedback. This drive comes in English by default.



Technical Description of 1336E-BRF10-AN-EN-HA2-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 0.75 (1) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repair Services for 1336E-BRF10-AN-EN-HA2-L9E

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HA2-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-BRF10-AN-EN-HA2-L9E

Please refer to the manual for more information about the 1336E-BRF10-AN-EN-HA2-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AN-EN-HA2-L9E Ser A
1336E-BRF10-AN-EN-HA2-L9E/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-BRF10-AN-EN-HA2-L9E
  • 1336E-8RF10-AN-EN-HA2-L9E
  • 1336E-BRFl0-AN-EN-HA2-L9E
  • 1336E-BRF1o-AN-EN-HA2-L9E
  • 1336E-BRF10-AN-EN-HA2-19E
  • 1336EBRF10ANENHA2L9E

Dimensions For 1336E-BRF10-AN-EN-HA2-L9E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-BRF10-AN-EN-HA2-L9E

Resolutions For 1336E-BRF10-AN-EN-HA2-L9E

About

Technical Specifications for 1336E-BRF10-AN-EN-HA2-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HA2-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HA2Programmer/Controller with a Digital Pot
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HA2-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HA2Programmer/Controller with a Digital Pot
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HA2-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HA2-L9E units instead of migration.

About 1336E-BRF10-AN-EN-HA2-L9E

The Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive provides a voltage range of 513 to 620 Volts DC and 380 to 480 Volts AC. This drive also operates with a frequency of 50 to 60 Hertz and a Horsepower rating of 1 Horsepower. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive has an open enclosure that provides its own mounting mechanism. This enclosure enables the drive to withstand a temperature of 50 degrees Celsius. Still, when mounting the drive, clearances of 6 inches on each side must be respected. Once the 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive has been installed but prior to the start-up, the users need to make sure that no damage has occurred during the shipment or during the mounting process. All jumpers and controls must be properly placed in order to guarantee a safe programming and safe start-up.



It is also important for the voltage input to be checked and to make sure that all the motor connections are properly sized and tightened before putting the Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive into operation. These recommendations are useful in order to prevent the drive from suffering any damages as a result of poor connections. The 1336E-BRF10-AN-EN-HA2-L9E adjustable frequency AC and DC drive includes a programmer and controller that comes with a digital pot, and it also includes a control interface that operates with a voltage of 115 Volts AC that includes encoder feedback. This drive comes in English by default.



Technical Description of 1336E-BRF10-AN-EN-HA2-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 0.75 (1) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HA2-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HA2-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336E-BRF10-AN-EN-HA2-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AN-EN-HA2-L9E Ser A
1336E-BRF10-AN-EN-HA2-L9E/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-BRF10-AN-EN-HA2-L9E
  • 1336E-8RF10-AN-EN-HA2-L9E
  • 1336E-BRFl0-AN-EN-HA2-L9E
  • 1336E-BRF1o-AN-EN-HA2-L9E
  • 1336E-BRF10-AN-EN-HA2-19E
  • 1336EBRF10ANENHA2L9E
PDF