1336E-BRF10-AN-EN-HAP-L6 | Allen Bradley Drives 1336 IMPACT Drives

1336E-BRF10-AN-EN-HAP-L6

Rated 4.5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-BRF10-AN-EN-HAP-L6

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HAP-L6 drive is an AC and DC-powered adjustable frequency drive. It has been designed and manufactured as part of the Allen-Bradley 1336 IMPACT series. The 1336E-BRF10-AN-EN-HAP-L6 adjustable frequency drive’s AC input voltage range is 380 to 480 Volts AC at 50 to 60 Hertz and its DC input voltage range is 513 to 620 Volts DC. It features an HMI or human-machine interface that can be used to program it but not to control it. The 1336E-BRF10-AN-EN-HAP-L6 adjustable frequency drive also comes with a 115 Volts AC rated control interface. This content was written and compiled by DO Supply and should not be copied.
Available Now
Request a quote for 1336E-BRF10-AN-EN-HAP-L6

Description: The Allen-Bradley/Rockwell Automation 1336E-BRF10-AN-EN-HAP-L6 drive is an AC and DC-powered adjustable frequency drive. It has been designed and manufactured as part of the Allen-Bradley 1336 IMPACT series. The 1336E-BRF10-AN-EN-HAP-L6 adjustable frequency drive’s AC input voltage range is 380 to 480 Volts AC at 50 to 60 Hertz and its DC input voltage range is 513 to 620 Volts DC. It features an HMI or human-machine interface that can be used to program it but not to control it. The 1336E-BRF10-AN-EN-HAP-L6 adjustable frequency drive also comes with a 115 Volts AC rated control interface. This content was written and compiled by DO Supply and should not be copied.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-BRF10-AN-EN-HAP-L6.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 10 reviews

    Technical Specifications for 1336E-BRF10-AN-EN-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HAPProgrammer Only
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HAP-L6 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HAPProgrammer Only
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HAP-L6 units instead of migration.

s

About 1336E-BRF10-AN-EN-HAP-L6

The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive is a variable frequency drive with a 115 Volts AC rated control interface board integrated. The drive can be supplied with 380 to 480 Volts AC or with 513 to 620 Volts DC voltage and it can produce higher torques at upper limit supply voltages. The 1336E-BRF10-AN-EN-HAP-L6 is only a 1 Horsepower rated drive and it is suitable for applications such as small fans and pumps. Although it is small in terms of power, this drive can significantly improve the performance and efficiency of 3-phase motors. The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive is equipped with an internal surge protector. There are also built-in protections from overloads, high voltages, and overheating. Although the drive itself is very well protected, it should be installed in systems with the stable power supply. If the drive operates supplied with high voltage swings for a long period of time, some internal components, and especially the DC bus capacitors, will get weaker over time.



The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive contains an LCD with programming keys but with no control keys. This HMI makes commissioning and troubleshooting the device much easier. The 1336E-BRF10-AN-EN-HAP-L6 drive is designed to be installed by attachment to a panel. The manufacturer guarantees flawless operation when the drive is installed in surroundings with ambient temperatures of less than 40 degrees Celsius. The users should try to limit the distance between the motor and the drive when planning the place where the drive will be installed. If the drive is too far away from the motor, there might be a need for additional devices that can limit voltage reflections at the motor.



Technical Description of 1336E-BRF10-AN-EN-HAP-L6

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 0.75 (1) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repair Services for 1336E-BRF10-AN-EN-HAP-L6

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-BRF10-AN-EN-HAP-L6

Please refer to the manual for more information about the 1336E-BRF10-AN-EN-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AN-EN-HAP-L6 Ser A
1336E-BRF10-AN-EN-HAP-L6/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-BRF10-AN-EN-HAP-L6
  • 1336E-8RF10-AN-EN-HAP-L6
  • 1336E-BRFl0-AN-EN-HAP-L6
  • 1336E-BRF1o-AN-EN-HAP-L6
  • 1336E-BRF10-AN-EN-HAP-16
  • 1336EBRF10ANENHAPL6

Dimensions For 1336E-BRF10-AN-EN-HAP-L6

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-BRF10-AN-EN-HAP-L6

Resolutions For 1336E-BRF10-AN-EN-HAP-L6

About

Technical Specifications for 1336E-BRF10-AN-EN-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HAPProgrammer Only
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF10-AN-EN-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)0.75 (1)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
HAPProgrammer Only
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF10-AN-EN-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF10-AN-EN-HAP-L6 units instead of migration.

About 1336E-BRF10-AN-EN-HAP-L6

The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive is a variable frequency drive with a 115 Volts AC rated control interface board integrated. The drive can be supplied with 380 to 480 Volts AC or with 513 to 620 Volts DC voltage and it can produce higher torques at upper limit supply voltages. The 1336E-BRF10-AN-EN-HAP-L6 is only a 1 Horsepower rated drive and it is suitable for applications such as small fans and pumps. Although it is small in terms of power, this drive can significantly improve the performance and efficiency of 3-phase motors. The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive is equipped with an internal surge protector. There are also built-in protections from overloads, high voltages, and overheating. Although the drive itself is very well protected, it should be installed in systems with the stable power supply. If the drive operates supplied with high voltage swings for a long period of time, some internal components, and especially the DC bus capacitors, will get weaker over time.



The Allen-Bradley 1336E-BRF10-AN-EN-HAP-L6 drive contains an LCD with programming keys but with no control keys. This HMI makes commissioning and troubleshooting the device much easier. The 1336E-BRF10-AN-EN-HAP-L6 drive is designed to be installed by attachment to a panel. The manufacturer guarantees flawless operation when the drive is installed in surroundings with ambient temperatures of less than 40 degrees Celsius. The users should try to limit the distance between the motor and the drive when planning the place where the drive will be installed. If the drive is too far away from the motor, there might be a need for additional devices that can limit voltage reflections at the motor.



Technical Description of 1336E-BRF10-AN-EN-HAP-L6

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 0.75 (1) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336E-BRF10-AN-EN-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336E-BRF10-AN-EN-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF10-AN-EN-HAP-L6 Ser A
1336E-BRF10-AN-EN-HAP-L6/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-BRF10-AN-EN-HAP-L6
  • 1336E-8RF10-AN-EN-HAP-L6
  • 1336E-BRFl0-AN-EN-HAP-L6
  • 1336E-BRF1o-AN-EN-HAP-L6
  • 1336E-BRF10-AN-EN-HAP-16
  • 1336EBRF10ANENHAPL6
PDF