Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 IMPACT Drives 1336E-BRF100-AA-EN-HA2

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336E-BRF100-AA-EN-HA2

|
Need a Specific Revision?

The 1336E-BRF100-AA-EN-HA2 Impact Digital AC Drive is an adjustable frequency AC drive with 380 to 480 Volts AC or 513 to 620 Volts DC input voltage ratings and a NEMA Type 1 (IP 20) protection rating. This drive has English as the default language option and an easy-to-use Human-Machine Interface (HMI).

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336E-BRF100-AA-EN-HA2

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 IMPACT Drives
Part Number1336E-BRF100-AA-EN-HA2
Weight35.00 lbs (15.88 kg)
Voltage380 to 480 Volts AC, 513 to 620 Volts DC
Input Current25.0 Amps
Output Current24.0 Amps
Nominal Power Rating10.0 Horsepower
Output KVA19.9 KVA
Language OptionEnglish
HIMProgrammer/Controller w/Digital Pot
Protection RatingNEMA Type 1 (IP20)
Application TypeConstant Torque Load
DescriptionMicroprocessor AC Drive
Max. Short-circuit Rating200,000 Amps RMS
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336E-BRF100-AA-EN-HA2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF100-AA-EN-HA2 units instead of migration.

Request a Repair

The Allen-Bradley 1336E-BRF100-AA-EN-HA2 Impact AC Drive is a microprocessor-controlled drive that incorporates the patented Allen-Bradley Force Technology for enhanced control. This drive is designed for stand-alone applications, and it offers users a cost-effective motor control solution and an easy-to-use start-up sequence for simplified installation. The 1336E-BRF100-AA-EN-HA2 Drive accepts both AC and DC voltage inputs, and it has input ranges of 380 to 480 Volts AC or 513 to 620 Volts DC. This drive has a power rating of 7.5 Kilowatts (10.0 Horsepower) and a current rating of 25.0 Amps. The 1336E-BRF100-AA-EN-HA2 Drive has an output rating of 19.9 Kilo Volt-Amps (KVA) and 24.0 Amps. This drive is designed to support constant torque load applications, and it can provide a current boost of 150% of the Full Load Amp (FLA) rating for 1 minute. It supports the “flying start” mode (only in the sensorless control mode), and it has a maximum power loss ride-through rating of 2 seconds.

The 1336E-BRF100-AA-EN-HA2 Drive has a programmable motor overload protection option and also a programmable acceleration and deceleration times (programmable from 0 to 6553 seconds). This drive, like every 1336 Impact drive, is designed with the Allen-Bradley Force Technology for enhanced motor control. It has the English language as its default input language option, and it comes with a NEMA Type 1 (IP 20) protection rating. The 1336E-BRF100-AA-EN-HA2 Drive comes with an easy-to-read Human-Machine Interface (HMI) module, which provides both a programming and controller terminal. It has an operating temperature range of 0 to 40 degrees Celsius and it is designed for 5 to 95% non-condensing relative humidity.