1336E-BRF100-AA-EN-HA2-L5

The 1336E-BRF100-AA-EN-HA2-L5 is an adjustable frequency AC drive from Allen-Bradley. Popularly termed as Variable Frequency Drive (VFD), Variable Speed Drive (VSD), or Frequency Inverter, this drive delivers variable Torque control through Field Oriented Control (FOC) control method as well as implement protective motor start-up and shutdown with the integrated motor stopping modes supported by the drive. With controlled starting and stopping, efficient motor operation and cost reduction may be observed due to the controlled generation of inrush current. Additionally, connected motors may be operated at a longer time as controlled start and stop limits and reduce mechanical stresses to the motor brought by a sudden change in the rotation direction. The 1336E-BRF100-AA-EN-HA2-L5 has an input voltage rating 380-480 VAC, 3-Phase or 513 +/- 620 VDC, input kVA of 28.46, and input current of 25 Amperes. This drive delivers an output voltage range of 0-480 VAC, 3-Phase; output current of 24.0 Amperes and output power of 7.5 kW (10.0 HP) along an output kVA of 19.92. This drive comes with built-in optional components including a 24 VDC / VAC rated control interface module and a programmer / controller Human Interface Module (HIM) with a digital potentiometer. This local HIM is used for local operation, configuration, and monitoring of the drive. The 1336E-BRF100-AA-EN-HA2-L5 are integrated with drive protective features particularly programmable motor overload protection (I2T), Inverter overload protection (IT), Overspeed detection, Programmable stall detection, Peak output current monitoring to protect against the excessive current at the output due to a phase-to-ground or phase-to-phase short, Ground fault monitoring, DC bus voltage monitoring to protect against Undervoltage or overvoltage conditions., power structure heatsink temperature monitoring, motor Overspeed, internal voltage reflection reduction mechanism.

The 1336E-BRF100-AA-EN-HA2-L5 variable frequency drive (VFD) is a drive that is intended to control and operate industrial induction and electromechanical motors. The drive is mainly composed of a converter, a direct current link, and an inverter. This drive has a great ability to reduce stress on motors by providing smooth speed, torque, start and stop controls. This is 1 of the standard drives included in the IMPACT series by Allen-Bradley. The Allen-Bradley 1336E-BRF100-AA-EN-HA2-L5 variable frequency drive (VFD) can reduce energy costs, improve the working environment that it is part of, and help the motor operate at a speed that is required by the application at hand. The Allen-Bradley 1336E-BRF100-AA-EN-HA2-L5 variable frequency drive (VFD) includes an IP 20 enclosure. This enclosure covers the whole drive structure, but it is still intended to be placed in an indoor environment without any corrosive materials in it that might cause further damages to the enclosure and thus affect the drive. When installing the drive, it is also recommended to leave clearances of at least 6 inches on each side of the drive in order to avoid overheating. The Allen-Bradley 1336E-BRF100-AA-EN-HA2-L5 variable frequency drive (VFD) includes programmer and controller functions and a digital pot. This controller has a 24 Volts DC control interface. Both of these features, combined with a human-machine interface, simplify different drive operations since supervisors will have quick access to the whole drive programming system. The Allen-Bradley 1336E-BRF100-AA-EN-HA2-L5 variable frequency drive (VFD) can withstand a temperature of up to 40 degrees Celsius and a humidity range of 5 to 95%. It is recommended to place the drive in an operating or storage environment where there are no liquids.