1336E-BRF100-AA-EN-L9E

The 1336E-BRF100-AA-EN-L9E is a 1336 IMPACT Adjustable Frequency Drive manufactured by Allen-Bradley. It is rated 380 to 480 Volts AC or 513 to 620 Volts DC, 3-Phase, 10 Horsepower, 7.5 Kilowatts, Frame size A4 and it weighs 14.515 kilograms. This drive features a simple startup sequence and provides microprocessor controlled speed, torque, and braking capabilities suitable for industrial and field applications that require auto-start, flying start, bumpless speed/torque control, dynamic braking, flux braking, or DC braking. It features an IP20 (NEMA 1) enclosure, and 115 Volts AC and Encoder Feedback Control Interface Options. As an Allen-Bradley 1336 IMPACT drive, the 1336E-BRF100-AA-EN-L9E IMPACT drive provides high-performance microprocessor-based Field-Oriented Control (FOC) by relying on FORCE technologies. In addition, this drive incorporates a non-volatile parameter storage which ensures that all data and drive configuration remain the same even when power is disconnected from the drive.

The 1336E-BRF100-AA-EN-L9E IMPACT drive features a fully programmable motor overload protection and it also features motor overspeed detection, stall detection, overcurrent protection, phase-to-phase short protection, phase-to-ground protection, overvoltage and undervoltage protection as well as real-time diagnostics. The internal voltage reflection reduction mechanism of the 1336E-BRF100-AA-EN-L9E IMPACT drive helps control motor overvoltage and increase cable length before a cable terminator is required but cable terminators or output reactors can be added to limit voltage reflections at the motor if long cables are used to connect the drive to the motor. Note that the highest altitude at which the 1336E-BRF100-AA-EN-L9E IMPACT drive remains operational without derating is 1000 Meters and its ambient operating temperature should not exceed 0 to 40 degrees Celsius. In addition, exposure to volatile or corrosive gasses can result in drive malfunction or damage.