1336E-BRF50-AA-EN-HAP-L9E | Allen Bradley Drives 1336 IMPACT Drives

1336E-BRF50-AA-EN-HAP-L9E

Rated 5 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-BRF50-AA-EN-HAP-L9E

Revisions: Ser A 
Description: The 1336E-BRF50-AA-EN-HAP-L9E drive is an adjustable frequency drive that can use its adjustable frequency to control the speed and torque of a compatible motor. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the 1336 IMPACT drive series. The 1336E-BRF50-AA-EN-HAP-L9E adjustable frequency drive can be programmed directly through its built-in programmer-only HMI or human-machine interface. It can be controlled through its 115 Volts AC rated control interface which supports encoder feedback. The 1336E-BRF50-AA-EN-HAP-L9E adjustable frequency drive operates with 5 Horsepower of output power and with 380 to 480 Volts AC or 513 to +/-620 Volts DC of input voltage.
Available Now
Request a quote for 1336E-BRF50-AA-EN-HAP-L9E

Description: The 1336E-BRF50-AA-EN-HAP-L9E drive is an adjustable frequency drive that can use its adjustable frequency to control the speed and torque of a compatible motor. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the 1336 IMPACT drive series. The 1336E-BRF50-AA-EN-HAP-L9E adjustable frequency drive can be programmed directly through its built-in programmer-only HMI or human-machine interface. It can be controlled through its 115 Volts AC rated control interface which supports encoder feedback. The 1336E-BRF50-AA-EN-HAP-L9E adjustable frequency drive operates with 5 Horsepower of output power and with 380 to 480 Volts AC or 513 to +/-620 Volts DC of input voltage.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-BRF50-AA-EN-HAP-L9E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 15 reviews

    Technical Specifications for 1336E-BRF50-AA-EN-HAP-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF50-AA-EN-HAP-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF50-AA-EN-HAP-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF50-AA-EN-HAP-L9E units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF50-AA-EN-HAP-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF50-AA-EN-HAP-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF50-AA-EN-HAP-L9E units instead of migration.

s

About 1336E-BRF50-AA-EN-HAP-L9E

The 1336E-BRF50-AA-EN-HAP-L9E drive is a 1336 IMPACT drive by Allen-Bradley/Rockwell Automation. This drive has a wide range of uses and it incorporates the Field-Oriented Control (FOC) that enables the drive to perform on a high level and to gain significant torque control of an AC motor. This adjustable frequency AC drive supports encoder-less operation and it includes features such as motor temperature compensation, process trim control, motor overload protection, simple start-up, bus regulation, adjustable acceleration and deceleration times, programmable velocity loop, ground fault protection, and undervoltage/overvoltage protection. The 1336E-BRF50-AA-EN-HAP-L9E drive has many protective and programmable functions that will enable the users to use it for different applications where reliability and flexibility are very important. The 1336 IMPACT drives are produced with a laminar bus design that provides minimal snubber losses and high-quality IGBT performance due to a significantly reduced internal inductance. The 1336 IMPACT series drives have insulated gate bipolar transistors (IGBTs) that provide quiet motor operation through the ability to program the carrier frequency. Also, the IGBT functionality of these drives minimize conduction losses and switching.



The 1336E-BRF50-AA-EN-HAP-L9E 1336 IMPACT series industrial drive requires an input voltage of 380 to 480 Volts AC or 513 to 620 Volts DC and it comes with optional functions that further improve the drive’s performance levels and provide more capabilities to meet needs of the most demanding applications. The drive comes with an English language module and a standardized enclosure with an IP20 (NEMA Type 1) designation. The nominal power rating of the 1336E-BRF50-AA-EN-HAP-L9E drive is 3.7 kilowatts or 5 Horsepower. In regard to features, the drive has a human-machine interface (HMI) with programmer-only functions and a 115 Volts AC control interface with encoder feedback. The additional HMI will provide advanced capabilities that include a fast programming process and a user-friendly platform that can be used for various adjustments for applications that need customization.



Technical Description of 1336E-BRF50-AA-EN-HAP-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 3.7 (5) kilowatts(horsepower) and has a(n) NEMA 1 (IP20) enclosure. This unit is in the English/English language.

Repair Services for 1336E-BRF50-AA-EN-HAP-L9E

Type Lead Time Price Action
Repair Service 2-4 weeks $3032cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF50-AA-EN-HAP-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-BRF50-AA-EN-HAP-L9E

Please refer to the manual for more information about the 1336E-BRF50-AA-EN-HAP-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF50-AA-EN-HAP-L9E Ser A
1336E-BRF50-AA-EN-HAP-L9E/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-BRF50-AA-EN-HAP-L9E
  • 1336E-8RF50-AA-EN-HAP-L9E
  • 1336E-BRF5o-AA-EN-HAP-L9E
  • 1336E-BRF50-AA-EN-HAP-19E
  • 1336EBRF50AAENHAPL9E

Dimensions For 1336E-BRF50-AA-EN-HAP-L9E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-BRF50-AA-EN-HAP-L9E

Resolutions For 1336E-BRF50-AA-EN-HAP-L9E

About

Technical Specifications for 1336E-BRF50-AA-EN-HAP-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF50-AA-EN-HAP-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF50-AA-EN-HAP-L9E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF50-AA-EN-HAP-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF50-AA-EN-HAP-L9E units instead of migration.

About 1336E-BRF50-AA-EN-HAP-L9E

The 1336E-BRF50-AA-EN-HAP-L9E drive is a 1336 IMPACT drive by Allen-Bradley/Rockwell Automation. This drive has a wide range of uses and it incorporates the Field-Oriented Control (FOC) that enables the drive to perform on a high level and to gain significant torque control of an AC motor. This adjustable frequency AC drive supports encoder-less operation and it includes features such as motor temperature compensation, process trim control, motor overload protection, simple start-up, bus regulation, adjustable acceleration and deceleration times, programmable velocity loop, ground fault protection, and undervoltage/overvoltage protection. The 1336E-BRF50-AA-EN-HAP-L9E drive has many protective and programmable functions that will enable the users to use it for different applications where reliability and flexibility are very important. The 1336 IMPACT drives are produced with a laminar bus design that provides minimal snubber losses and high-quality IGBT performance due to a significantly reduced internal inductance. The 1336 IMPACT series drives have insulated gate bipolar transistors (IGBTs) that provide quiet motor operation through the ability to program the carrier frequency. Also, the IGBT functionality of these drives minimize conduction losses and switching.



The 1336E-BRF50-AA-EN-HAP-L9E 1336 IMPACT series industrial drive requires an input voltage of 380 to 480 Volts AC or 513 to 620 Volts DC and it comes with optional functions that further improve the drive’s performance levels and provide more capabilities to meet needs of the most demanding applications. The drive comes with an English language module and a standardized enclosure with an IP20 (NEMA Type 1) designation. The nominal power rating of the 1336E-BRF50-AA-EN-HAP-L9E drive is 3.7 kilowatts or 5 Horsepower. In regard to features, the drive has a human-machine interface (HMI) with programmer-only functions and a 115 Volts AC control interface with encoder feedback. The additional HMI will provide advanced capabilities that include a fast programming process and a user-friendly platform that can be used for various adjustments for applications that need customization.



Technical Description of 1336E-BRF50-AA-EN-HAP-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 3.7 (5) kilowatts(horsepower) and has a(n) NEMA 1 (IP20) enclosure. This unit is in the English/English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $3032cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF50-AA-EN-HAP-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $3032cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF50-AA-EN-HAP-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336E-BRF50-AA-EN-HAP-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF50-AA-EN-HAP-L9E Ser A
1336E-BRF50-AA-EN-HAP-L9E/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-BRF50-AA-EN-HAP-L9E
  • 1336E-8RF50-AA-EN-HAP-L9E
  • 1336E-BRF5o-AA-EN-HAP-L9E
  • 1336E-BRF50-AA-EN-HAP-19E
  • 1336EBRF50AAENHAPL9E
PDF