Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 IMPACT Drives 1336E-BRF75-AA-EN-HA2-L7E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336E-BRF75-AA-EN-HA2-L7E

|
Need a Specific Revision?

The 1336E-BRF75-AA-EN-HA2-L7E drive is an AC-powered and DC-powered adjustable frequency drive. It has been manufactured by Allen-Bradley/Rockwell Automation as part of the 1336 IMPACT drives series. The 1336E-BRF75-AA-EN-HA2-L7E adjustable frequency drive can operate with 380 to 480 Volts AC voltage or with 513 to +/-620 Volts DC voltage. The drive’s HMI is a programmer and controller type of HMI with a digital potentiometer. The 1336E-BRF75-AA-EN-HA2-L7E adjustable frequency drive also has a TTL contact control interface with encoder feedback.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336E-BRF75-AA-EN-HA2-L7E

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 IMPACT Drives
Part Number1336E-BRF75-AA-EN-HA2-L7E
Weight24.19 lbs (10.97 kg)
Input Voltage380-480V AC
Wattage5.5
Horsepower7.5
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish
Human Interface OptionNo
Control Interface OptionsTTL Contact & Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336E-BRF75-AA-EN-HA2-L7E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF75-AA-EN-HA2-L7E units instead of migration.

View as PDF
Request a Repair

The Allen-Bradley 1336E-BRF75-AA-EN-HA2-L7E is an AC drive. It belongs to the 1336 IMPACT series. IMPACT drives are available in power ratings of 0.5 to 800 HP. The 1336E-BRF75-AA-EN-HA2-L7E is rated for 380 – 480V AC (or 513 – 620V DC) input. The input power range is 9 to 12 kVA and the input current is rated at 14A. The output of the 1336E-BRF75-AA-EN-HA2-L7E is rated for 7.5 HP (5.5 kW), 11.07 kVA and 13.9 A. Three-phase input power delivers full-rated power at the output whereas single-phase input delivers a maximum of 50% the rated power at the output. The tolerance for input voltage is ±10% whereas the acceptable range of the input frequency is 48 to 62 Hz. The drive is rated for 100% continuous fundamental current at the output and 150% of the fundamental current at the output for 1 min. The HMI on the 1336E-BRF75-AA-EN-HA2-L7E is a programmer/controller module with a digital potentiometer. The programmer is provided for drive programming/parameter viewing and the control panel is provided for controlling drive functions. The HMI supports the English language.

For control inputs, the 1336E-BRF75-AA-EN-HA2-L7E supports a TTL contact with encoder feedback. Circuits interfaced with the drive need to be capable of working at 10mA without any degradation of the signal. Furthermore, reed-type input devices should be used. The 1336E-BRF75-AA-EN-HA2-L7E comes in a NEMA Type 1 (IP20) enclosure. The dimensions of the enclosure are 350 x 260 x 212 mm. The drive weighs 35 lbs. The heat dissipated by the 1336E-BRF75-AA-EN-HA2-L7E during operation is 300W. The working temperature range of the drive is 0 to 40 °C at 5–95% relative humidity (non-condensing).

Revision Part #Also known as
1336E-BRF75-AA-EN-HA2-L7E Ser A1336E-BRF75-AA-EN-HA2-L7E/A, Series A, Rev A
Don't see your particular revision? Contact us now.