1336E-BRF75-AA-EN-HAP-L8E | Allen Bradley Drives 1336 IMPACT Drives

1336E-BRF75-AA-EN-HAP-L8E

Rated 4.6 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-BRF75-AA-EN-HAP-L8E

Revisions: Ser A 
Description: The 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive has been manufactured by Allen-Bradley/Rockwell Automation as a 1336 IMPACT series adjustable frequency drive. Its human-machine interface can be used to program it but not to control it. However, the 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive also comes with a 24 Volts AC/DC rated control interface that utilizes encoder feedback. It can support 380 to 480 Volts AC and 513 to +/-620 Volts DC rated input voltage. The 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive is rated for 7.5 Horsepower of maximum nominal output power.
Available Now
Request a quote for 1336E-BRF75-AA-EN-HAP-L8E

Description: The 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive has been manufactured by Allen-Bradley/Rockwell Automation as a 1336 IMPACT series adjustable frequency drive. Its human-machine interface can be used to program it but not to control it. However, the 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive also comes with a 24 Volts AC/DC rated control interface that utilizes encoder feedback. It can support 380 to 480 Volts AC and 513 to +/-620 Volts DC rated input voltage. The 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency drive is rated for 7.5 Horsepower of maximum nominal output power.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-BRF75-AA-EN-HAP-L8E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 20 reviews

    Technical Specifications for 1336E-BRF75-AA-EN-HAP-L8E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF75-AA-EN-HAP-L8E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)5.5 (7.5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L8E24 Volts AC/DC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF75-AA-EN-HAP-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF75-AA-EN-HAP-L8E units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF75-AA-EN-HAP-L8E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)5.5 (7.5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L8E24 Volts AC/DC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF75-AA-EN-HAP-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF75-AA-EN-HAP-L8E units instead of migration.

s

About 1336E-BRF75-AA-EN-HAP-L8E

The Allen-Bradley/Rockwell Automation 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency AC drive is a stand-alone drive that will meet demanding speed and torque requirements. The drive is part of the Allen-Bradley 1336 IMPACT product series that features the Force technology and control method that is field-oriented. This series supports encoderless operation and it features simple step-by-step procedures for start-up from which new operators will benefit. These drives work perfectly in combination with SCANport programming terminals or communication modules, expanding the drive’s capabilities. Also, the series features logic interface option cards that enable the users to optimize the drive for special applications. Since these drives are used all around the world, they include several international certifications and they are available with plug-in language modules that allow for the installation of different language groups. The 1336E-BRF75-AA-EN-HAP-L8E drive is delivered with an English language module by default.



The 1336E-BRF75-AA-EN-HAP-L8E drive has an operating voltage of 380 to 480 Volts AC or 513 to 620 Volts DC and a 5.5 kilowatts (7.5 Horsepower) nominal output power rating. Besides that, the drive comes with a standardized IP20 (NEMA Type 1) enclosure that provides basic ingress protection. Other features of the drive include optional an optional human-machine interface (HMI) with programmer functions and a 24 Volts AC/DC control interface with encoder feedback. The series supports various control interfaces and HMI, along with communication modules that support communication through well-known protocols. The 1336E-BRF75-AA-EN-HAP-L8E drive is a microprocessor-controlled drive that uses a parameter table that significantly simplifies the programming process. Besides that, the drive allows for non-volatile parameter storage and diagnostics procedures such as tests that are performed on a logic board and the whole power structure. Other features of the drive include bumpless control of speed/torque, the use of function blocks, a programmable relay, an advanced digital speed loop, DC braking, bus regulation, a flying start, and process trimming. Even though 1336 IMPACT drives are intended for AC power, it is not uncommon to use these drives for applications where DC drives are needed. The 1336 IMPACT series provides a great range of flexible and multi-functional control units that will reduce costs and improve the overall machine system.



This content was written and compiled by DO Supply and should not be copied.

Technical Description of 1336E-BRF75-AA-EN-HAP-L8E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 5.5 (7.5) kilowatts(horsepower) and has a(n) NEMA 1 (IP20) enclosure. This unit is in the English/English language.

Repair Services for 1336E-BRF75-AA-EN-HAP-L8E

Type Lead Time Price Action
Repair Service 2-4 weeks $2895cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF75-AA-EN-HAP-L8E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-BRF75-AA-EN-HAP-L8E

Please refer to the manual for more information about the 1336E-BRF75-AA-EN-HAP-L8E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF75-AA-EN-HAP-L8E Ser A
1336E-BRF75-AA-EN-HAP-L8E/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-BRF75-AA-EN-HAP-L8E
  • 1336E-8RF75-AA-EN-HAP-L8E
  • 1336E-BRF75-AA-EN-HAP-18E
  • 1336E-BRF75-AA-EN-HAP-LbE
  • 1336EBRF75AAENHAPL8E

Dimensions For 1336E-BRF75-AA-EN-HAP-L8E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-BRF75-AA-EN-HAP-L8E

Resolutions For 1336E-BRF75-AA-EN-HAP-L8E

About

Technical Specifications for 1336E-BRF75-AA-EN-HAP-L8E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF75-AA-EN-HAP-L8E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)5.5 (7.5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L8E24 Volts AC/DC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-BRF75-AA-EN-HAP-L8E
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)5.5 (7.5)
Enclosure TypeNEMA 1 (IP20)
LanguageEnglish/English
HAPProgrammer Only
L8E24 Volts AC/DC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-BRF75-AA-EN-HAP-L8E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-BRF75-AA-EN-HAP-L8E units instead of migration.

About 1336E-BRF75-AA-EN-HAP-L8E

The Allen-Bradley/Rockwell Automation 1336E-BRF75-AA-EN-HAP-L8E adjustable frequency AC drive is a stand-alone drive that will meet demanding speed and torque requirements. The drive is part of the Allen-Bradley 1336 IMPACT product series that features the Force technology and control method that is field-oriented. This series supports encoderless operation and it features simple step-by-step procedures for start-up from which new operators will benefit. These drives work perfectly in combination with SCANport programming terminals or communication modules, expanding the drive’s capabilities. Also, the series features logic interface option cards that enable the users to optimize the drive for special applications. Since these drives are used all around the world, they include several international certifications and they are available with plug-in language modules that allow for the installation of different language groups. The 1336E-BRF75-AA-EN-HAP-L8E drive is delivered with an English language module by default.



The 1336E-BRF75-AA-EN-HAP-L8E drive has an operating voltage of 380 to 480 Volts AC or 513 to 620 Volts DC and a 5.5 kilowatts (7.5 Horsepower) nominal output power rating. Besides that, the drive comes with a standardized IP20 (NEMA Type 1) enclosure that provides basic ingress protection. Other features of the drive include optional an optional human-machine interface (HMI) with programmer functions and a 24 Volts AC/DC control interface with encoder feedback. The series supports various control interfaces and HMI, along with communication modules that support communication through well-known protocols. The 1336E-BRF75-AA-EN-HAP-L8E drive is a microprocessor-controlled drive that uses a parameter table that significantly simplifies the programming process. Besides that, the drive allows for non-volatile parameter storage and diagnostics procedures such as tests that are performed on a logic board and the whole power structure. Other features of the drive include bumpless control of speed/torque, the use of function blocks, a programmable relay, an advanced digital speed loop, DC braking, bus regulation, a flying start, and process trimming. Even though 1336 IMPACT drives are intended for AC power, it is not uncommon to use these drives for applications where DC drives are needed. The 1336 IMPACT series provides a great range of flexible and multi-functional control units that will reduce costs and improve the overall machine system.



This content was written and compiled by DO Supply and should not be copied.

Technical Description of 1336E-BRF75-AA-EN-HAP-L8E

This 1336 PLUS II Adjustable Frequency AC drive is a 380-480VAC or 513±620VDC unit with 5.5 (7.5) kilowatts(horsepower) and has a(n) NEMA 1 (IP20) enclosure. This unit is in the English/English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2895cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF75-AA-EN-HAP-L8E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2895cartAdd to Cart

Our highly skilled technicians can repair your 1336E-BRF75-AA-EN-HAP-L8E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336E-BRF75-AA-EN-HAP-L8E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-BRF75-AA-EN-HAP-L8E Ser A
1336E-BRF75-AA-EN-HAP-L8E/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-BRF75-AA-EN-HAP-L8E
  • 1336E-8RF75-AA-EN-HAP-L8E
  • 1336E-BRF75-AA-EN-HAP-18E
  • 1336E-BRF75-AA-EN-HAP-LbE
  • 1336EBRF75AAENHAPL8E
PDF