1336E-CWF20-AN-EN-L9E | Allen Bradley Drives 1336 IMPACT Drives

1336E-CWF20-AN-EN-L9E

Rated 4.9 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336E-CWF20-AN-EN-L9E

Revisions: Ser A 
Description: The 1336E-CWF20-AN-EN-L9E drive is an adjustable frequency drive from the Allen-Bradley/Rockwell Automation 1336 IMPACT drive series. It can support AC and DC voltage. The 1336E-CWF20-AN-EN-L9E adjustable frequency drive’s AC voltage rating is 500 to 600 Volts AC while its DC voltage rating is 775 Volts DC. Its output power rating is 2 Horsepower. The 1336E-CWF20-AN-EN-L9E adjustable frequency drive operates in English and it has a 115 Volts AC rated control interface with encoder feedback.
Available Now
Request a quote for 1336E-CWF20-AN-EN-L9E

Description: The 1336E-CWF20-AN-EN-L9E drive is an adjustable frequency drive from the Allen-Bradley/Rockwell Automation 1336 IMPACT drive series. It can support AC and DC voltage. The 1336E-CWF20-AN-EN-L9E adjustable frequency drive’s AC voltage rating is 500 to 600 Volts AC while its DC voltage rating is 775 Volts DC. Its output power rating is 2 Horsepower. The 1336E-CWF20-AN-EN-L9E adjustable frequency drive operates in English and it has a 115 Volts AC rated control interface with encoder feedback.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336E-CWF20-AN-EN-L9E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 5 reviews

    Technical Specifications for 1336E-CWF20-AN-EN-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-CWF20-AN-EN-L9E
Voltage500 to 600 Volts AC or 775 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-CWF20-AN-EN-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-CWF20-AN-EN-L9E units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-CWF20-AN-EN-L9E
Voltage500 to 600 Volts AC or 775 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-CWF20-AN-EN-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-CWF20-AN-EN-L9E units instead of migration.

s

About 1336E-CWF20-AN-EN-L9E

The Allen-Bradley/Rockwell Automation 1336E-CWF20-AN-EN-L9E drive is a variable speed controller. The controller supports 7-speed references and 2 jog speeds. The 1336E-CWF20-AN-EN-L9E drive has a minimum rated operating temperature of 0 degrees Celsius and a maximum rated operating temperature of 50 degrees Celsius. The high operating voltage is facilitated by an open-type enclosure. The 1336E-CWF20-AN-EN-L9E, by being part of the Allen-Bradley 1336 IMPACT series of controllers, uses the Allen-Bradley patented FORCE control technology which distinguishes and independently manages the motor flux and the torque separately, allowing the controller to achieve full torque. This feature also allows the 1336E-CWF20-AN-EN-L9E to be interfaced with applications with unique settings.



The Allen-Bradley 1336E-CWF20-AN-EN-L9E drive accommodates 115 Volts AC and encoder feedback at its control interface. To use an encoder feedback device with it requires an L option board. Note that encoder connections are routed in grounded steel conduits. When a wide tray is used to route all the cables, the signal cables and power cables must be separated with a steel divider to reduce the chances of corrupting signals. Note that if a conduit is used, it should be grounded at both ends. However, if shielded encoder cables are used, the cables should be grounded at the controller side. The 1336E-CWF20-AN-EN-L9E is designed to be operated with a voltage of between 500 and 600 Volts AC. The controller can also be operated with an input voltage of 775 Volts DC. The 1336E-CWF20-AN-EN-L9E has a 2 Horsepower output power rating, an English manual, and an IP00-rated enclosure. The controller should be stored in an environment with a temperature rating of between -40 and +70 degrees Celsius.



Technical Description of 1336E-CWF20-AN-EN-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 500-600VAC or 775VDC unit with 1.5 (2) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repair Services for 1336E-CWF20-AN-EN-L9E

Type Lead Time Price Action
Repair Service 2-4 weeks $3482cartAdd to Cart

Our highly skilled technicians can repair your 1336E-CWF20-AN-EN-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336E-CWF20-AN-EN-L9E

Please refer to the manual for more information about the 1336E-CWF20-AN-EN-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-CWF20-AN-EN-L9E Ser A
1336E-CWF20-AN-EN-L9E/A, Series A, Rev A Request Quote
Common misspellings:
  • l336E-CWF20-AN-EN-L9E
  • 1336E-CWF2o-AN-EN-L9E
  • 1336E-CWF20-AN-EN-19E
  • 1336ECWF20ANENL9E

Dimensions For 1336E-CWF20-AN-EN-L9E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336E-CWF20-AN-EN-L9E

Resolutions For 1336E-CWF20-AN-EN-L9E

About

Technical Specifications for 1336E-CWF20-AN-EN-L9E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-CWF20-AN-EN-L9E
Voltage500 to 600 Volts AC or 775 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336E-CWF20-AN-EN-L9E
Voltage500 to 600 Volts AC or 775 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeOpen (IP00)
LanguageEnglish/English
L9E115 Volts AC and Encoder Feedback
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336E-CWF20-AN-EN-L9E has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336E-CWF20-AN-EN-L9E units instead of migration.

About 1336E-CWF20-AN-EN-L9E

The Allen-Bradley/Rockwell Automation 1336E-CWF20-AN-EN-L9E drive is a variable speed controller. The controller supports 7-speed references and 2 jog speeds. The 1336E-CWF20-AN-EN-L9E drive has a minimum rated operating temperature of 0 degrees Celsius and a maximum rated operating temperature of 50 degrees Celsius. The high operating voltage is facilitated by an open-type enclosure. The 1336E-CWF20-AN-EN-L9E, by being part of the Allen-Bradley 1336 IMPACT series of controllers, uses the Allen-Bradley patented FORCE control technology which distinguishes and independently manages the motor flux and the torque separately, allowing the controller to achieve full torque. This feature also allows the 1336E-CWF20-AN-EN-L9E to be interfaced with applications with unique settings.



The Allen-Bradley 1336E-CWF20-AN-EN-L9E drive accommodates 115 Volts AC and encoder feedback at its control interface. To use an encoder feedback device with it requires an L option board. Note that encoder connections are routed in grounded steel conduits. When a wide tray is used to route all the cables, the signal cables and power cables must be separated with a steel divider to reduce the chances of corrupting signals. Note that if a conduit is used, it should be grounded at both ends. However, if shielded encoder cables are used, the cables should be grounded at the controller side. The 1336E-CWF20-AN-EN-L9E is designed to be operated with a voltage of between 500 and 600 Volts AC. The controller can also be operated with an input voltage of 775 Volts DC. The 1336E-CWF20-AN-EN-L9E has a 2 Horsepower output power rating, an English manual, and an IP00-rated enclosure. The controller should be stored in an environment with a temperature rating of between -40 and +70 degrees Celsius.



Technical Description of 1336E-CWF20-AN-EN-L9E

This 1336 PLUS II Adjustable Frequency AC drive is a 500-600VAC or 775VDC unit with 1.5 (2) kilowatts(horsepower) and has a(n) Open (IP00) enclosure. This unit is in the English/English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $3482cartAdd to Cart

Our highly skilled technicians can repair your 1336E-CWF20-AN-EN-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $3482cartAdd to Cart

Our highly skilled technicians can repair your 1336E-CWF20-AN-EN-L9E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336E-CWF20-AN-EN-L9E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336E-CWF20-AN-EN-L9E Ser A
1336E-CWF20-AN-EN-L9E/A, Series A, Rev A Request Quote

Common misspellings:
  • l336E-CWF20-AN-EN-L9E
  • 1336E-CWF2o-AN-EN-L9E
  • 1336E-CWF20-AN-EN-19E
  • 1336ECWF20ANENL9E
PDF