1336E-R040-AA-EN-L9E

The 1336E-R040-AA-EN-L9E is a 1336 IMPACT series drive manufactured by Rockwell Automation through the Allen Bradley line of factory automation systems. It is a high performing, microprocessor-based Field Oriented Control AC drive that utilizes Force Technologies by Rockwell. The 1336E-R040-AA-EN-L9E weighs 38.6 kilograms and has a power rating of 30 Kilowatts with 40 Horsepower. Its power supply input supports between 513 and 640 Volts of a 3-phase line. The dimensions of the drive are 276.4 inches in height by 476.3 inches in width. Coupled with its cost-effectiveness, its easy to use interface with the English language, and its lack of intricate installation procedures, the 1336E-R040-AA-EN-L9E is popular among the industrialists who run factories of any size. For the purpose of communication, the 1336E-R040-AA-EN-L9E drive uses a control interface option with a 115 Volt AC powered encoder feedback. The drive is assigned a Frame of “C” for the purpose of identification according to its power rating so as to identify their sizes and specification.

The control board of the 1336E-R040-AA-EN-L9E drive contains a gateway connector, two SCANPorts, a pulse input Jumper (J4), an EE jumper, a language module, two L Option Connectors, and the Terminal blocks TB10 and TB11. The 1336 IMPACT drive is characterized by a number of protective features, including the programmable motor overload prevention, over speed detection, ground fault monitoring, power structure heatsink temperature monitoring among other protective features. During installation, care should be taken by the operator so as to avoid injuries from improper configurations. The instructions on Installation of solid state controls need to be followed; safety consideration as identifying hazards, avoiding hazards and recognizing the consequences. The 1336E-R040-AA-EN-L9E is featured with NEMA 1 (IP20) Enclosure type meaning that the device is for indoor use and has protection against solid objects of up to 12 millimeters. To allow for heat dissipation, the drive must be mounted in such a way that there is enough space at the top, sides, and front of the cabinet to let out the heat generated. Further procedures on the correct manner of installation of 1336E-R040-AA-EN-L9E and other drives of 1336 IMPACT family can be obtained from the user manual by Rockwell Automation.