DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1336-BDB-SP27C gate drive board has been designed exclusively to be used with the variable frequency drives from the 1336 series (in the Plus I, Plus II, Force, and Impact subseries).
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDB-SP27C. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-BDB-SP27C |
Type of device | Spare/Replacement part |
Compatibility | 1336 Plus I, Plus II, Force and Impact |
Main Equipment | AC Adjustable frequency drive |
Voltage | 230 Volts AC |
Horsepower rating | 75 Horsepower |
Operating temperature | 0-40 degrees Celsius |
Humidity levels | 5-95 % |
Mounting | Inside the drive |
Shipping Weight | 5 Pounds |
Installation level | Intermediate |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP27C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP27C units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-BDB-SP27C |
Type of device | Spare/Replacement part |
Compatibility | 1336 Plus I, Plus II, Force and Impact |
Main Equipment | AC Adjustable frequency drive |
Voltage | 230 Volts AC |
Horsepower rating | 75 Horsepower |
Operating temperature | 0-40 degrees Celsius |
Humidity levels | 5-95 % |
Mounting | Inside the drive |
Shipping Weight | 5 Pounds |
Installation level | Intermediate |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP27C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP27C units instead of migration.
sThe 1336-BDB-SP27C board is a gate drive board that has been designed exclusively to be used with the variable frequency drives from the 1336 series (in the Plus I, Plus II, Force, and Impact subseries). This part has been designed by Allen-Bradley and it can be found in the accessories catalog for the 1336 series. The Allen-Bradley 1336-BDB-SP27C gate drive board is compatible with the Frame E 1336 drives that come with a voltage of 230 Volts AC and a Horsepower rating of 75 Horsepower. Without this board, any drive from the 1336 series will be unable to operate since it is related to the power input and frequency control of the drive. This part is important for the backlight of the human-machine interface that is provided by the drive.
The Allen-Bradley 1336-BDB-SP27C gate drive board is made up of a printed circuit board (PCB). As a circuit board, it should be referenced to a negative grounding so it can work properly after installation. The installation of this part is an advanced circuitry installation. It needs to be properly connected and technicians need to make sure it is not in contact with any electrostatic discharge source so that it can operate without inconveniences. The Allen-Bradley 1336-BDB-SP27C gate drive board is located in the front part of the drive in the PC board mounting frame, specifically under the main control board. This conjunction of circuits is in charge of controlling the power, frequency, and other functions related to the indicators and the human-machine interface. Also, without these parts, the drive will not be able to start operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP27C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-BDB-SP27C |
Type of device | Spare/Replacement part |
Compatibility | 1336 Plus I, Plus II, Force and Impact |
Main Equipment | AC Adjustable frequency drive |
Voltage | 230 Volts AC |
Horsepower rating | 75 Horsepower |
Operating temperature | 0-40 degrees Celsius |
Humidity levels | 5-95 % |
Mounting | Inside the drive |
Shipping Weight | 5 Pounds |
Installation level | Intermediate |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-BDB-SP27C |
Type of device | Spare/Replacement part |
Compatibility | 1336 Plus I, Plus II, Force and Impact |
Main Equipment | AC Adjustable frequency drive |
Voltage | 230 Volts AC |
Horsepower rating | 75 Horsepower |
Operating temperature | 0-40 degrees Celsius |
Humidity levels | 5-95 % |
Mounting | Inside the drive |
Shipping Weight | 5 Pounds |
Installation level | Intermediate |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP27C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP27C units instead of migration.
The 1336-BDB-SP27C board is a gate drive board that has been designed exclusively to be used with the variable frequency drives from the 1336 series (in the Plus I, Plus II, Force, and Impact subseries). This part has been designed by Allen-Bradley and it can be found in the accessories catalog for the 1336 series. The Allen-Bradley 1336-BDB-SP27C gate drive board is compatible with the Frame E 1336 drives that come with a voltage of 230 Volts AC and a Horsepower rating of 75 Horsepower. Without this board, any drive from the 1336 series will be unable to operate since it is related to the power input and frequency control of the drive. This part is important for the backlight of the human-machine interface that is provided by the drive.
The Allen-Bradley 1336-BDB-SP27C gate drive board is made up of a printed circuit board (PCB). As a circuit board, it should be referenced to a negative grounding so it can work properly after installation. The installation of this part is an advanced circuitry installation. It needs to be properly connected and technicians need to make sure it is not in contact with any electrostatic discharge source so that it can operate without inconveniences. The Allen-Bradley 1336-BDB-SP27C gate drive board is located in the front part of the drive in the PC board mounting frame, specifically under the main control board. This conjunction of circuits is in charge of controlling the power, frequency, and other functions related to the indicators and the human-machine interface. Also, without these parts, the drive will not be able to start operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP27C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP27C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.