DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDB-SP32D. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP32D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP32D units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP32D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP32D units instead of migration.
sThe 1336-BDB-SP32D is a PCB Gate Drive Board manufactured by Allen-Bradley. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board feature 575 Volts AC and 75 Horsepower output. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is designed to operate on three-phase supply systems whose line voltages are symmetrical. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board should not be exposed to excessive ambient temperatures which may result in the malfunctioning of the drive board system.
To avoid the hazard of electric shock, the users should verify that the voltage on the bus capacitors has discharged before attempting any work on the Allen-Bradley 1336-BDB-SP32D Gate Drive Board, and this is achieved by measuring the DC bus voltage at the + and - terminals called the TB1 terminals. The voltage reading should be 0.0 Volts DC. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is suitable for use on a circuit capable of delivering a maximum of 200,000 rms symmetrical Amps. The surge suppression devices are included to protect the Allen-Bradley 1336-BDB-SP32D Gate Drive Board from lightning-induced overvoltages between the line and ground. An isolation transformer is recommended where the potential exists for abnormally high phase-to-ground voltages (more than 125% of the nominal voltages) or equipment that could cause the ground potential to vary with the operation.
Allen Bradley-PCB GATE DRIVE 1336STG 575V 75HP Adjustable Frequency Drive
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP32D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP32D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP32D Ser A
|
1336-BDB-SP32D/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP32D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP32D units instead of migration.
The 1336-BDB-SP32D is a PCB Gate Drive Board manufactured by Allen-Bradley. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board feature 575 Volts AC and 75 Horsepower output. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is designed to operate on three-phase supply systems whose line voltages are symmetrical. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board should not be exposed to excessive ambient temperatures which may result in the malfunctioning of the drive board system.
To avoid the hazard of electric shock, the users should verify that the voltage on the bus capacitors has discharged before attempting any work on the Allen-Bradley 1336-BDB-SP32D Gate Drive Board, and this is achieved by measuring the DC bus voltage at the + and - terminals called the TB1 terminals. The voltage reading should be 0.0 Volts DC. The Allen-Bradley 1336-BDB-SP32D Gate Drive Board is suitable for use on a circuit capable of delivering a maximum of 200,000 rms symmetrical Amps. The surge suppression devices are included to protect the Allen-Bradley 1336-BDB-SP32D Gate Drive Board from lightning-induced overvoltages between the line and ground. An isolation transformer is recommended where the potential exists for abnormally high phase-to-ground voltages (more than 125% of the nominal voltages) or equipment that could cause the ground potential to vary with the operation.
Allen Bradley-PCB GATE DRIVE 1336STG 575V 75HP Adjustable Frequency Drive
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP32D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP32D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP32D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP32D Ser A
|
1336-BDB-SP32D/A, Series A, Rev A | Request Quote |