DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDB-SP33D. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-BDB-SP33D |
Description | PCB Gate Drive Board |
Voltage | 575V AC |
Horsepower | 100 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 74101-169-63 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP33D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP33D units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-BDB-SP33D |
Description | PCB Gate Drive Board |
Voltage | 575V AC |
Horsepower | 100 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 74101-169-63 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP33D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP33D units instead of migration.
sThe Allen-Bradley 1336-BDB-SP33D PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336 Plus, Force, Impact, and Plus II drives family with 575 Volts AC input and with a 100 Horsepower output power rating. This board is located behind the main control board and it is an integral component of the Gate/Power board assembly, and it has the capability to receive very low input, and amplify it to a high current input for high-power transistors. This driver board is also close to the power board, and due to the proximity to the power board, if the power board is replaced, the gate driver board is also replaced or tested in the process.
The 1336-BDB-SP33D PCB Gate Driver Board connects to the drive’s main control board via jumper connectors J2, J6, J7, J8, J9, J10, and J13, and it has a 24 Volts DC terminal (TB4) for Auxiliary DC input. The 1336-BDB-SP33D PCB Gate Driver Board is installed on the drive by attaching it to the drive’s main control mounting plate, and tightening it with 8 supplied mounting screws in a ¼ clockwise direction. After this, the main control mounting plate with the attached gate drive board is inserted in the drive’s enclosure, and the DC terminal is connected. The jumper connectors from the main control board are also connected, and the drive is turned on and checked for proper installation via LED light indicators. The 1336-BDB-SP33D PCB Gate Driver Board is also tested for an open condition at fuses F1 and F3, using a testing meter, and the tested reading is compared to user-supplied standard readings.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336-BDB-SP33D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP33D Ser A
|
1336-BDB-SP33D/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-BDB-SP33D |
Description | PCB Gate Drive Board |
Voltage | 575V AC |
Horsepower | 100 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 74101-169-63 |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-BDB-SP33D |
Description | PCB Gate Drive Board |
Voltage | 575V AC |
Horsepower | 100 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 74101-169-63 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP33D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP33D units instead of migration.
The Allen-Bradley 1336-BDB-SP33D PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336 Plus, Force, Impact, and Plus II drives family with 575 Volts AC input and with a 100 Horsepower output power rating. This board is located behind the main control board and it is an integral component of the Gate/Power board assembly, and it has the capability to receive very low input, and amplify it to a high current input for high-power transistors. This driver board is also close to the power board, and due to the proximity to the power board, if the power board is replaced, the gate driver board is also replaced or tested in the process.
The 1336-BDB-SP33D PCB Gate Driver Board connects to the drive’s main control board via jumper connectors J2, J6, J7, J8, J9, J10, and J13, and it has a 24 Volts DC terminal (TB4) for Auxiliary DC input. The 1336-BDB-SP33D PCB Gate Driver Board is installed on the drive by attaching it to the drive’s main control mounting plate, and tightening it with 8 supplied mounting screws in a ¼ clockwise direction. After this, the main control mounting plate with the attached gate drive board is inserted in the drive’s enclosure, and the DC terminal is connected. The jumper connectors from the main control board are also connected, and the drive is turned on and checked for proper installation via LED light indicators. The 1336-BDB-SP33D PCB Gate Driver Board is also tested for an open condition at fuses F1 and F3, using a testing meter, and the tested reading is compared to user-supplied standard readings.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336-BDB-SP33D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP33D Ser A
|
1336-BDB-SP33D/A, Series A, Rev A | Request Quote |