The 1336-BDB-SP3E is a PCB Gate Drive Board manufactured by Allen Bradley. The Allen-Bradley 1336-BDB-SP3E Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP3E Drive Board feature 460V and 15HP output. The Allen-Bradley 1336-BDB-SP3E Drive Board’s analog I/O configuration provides a standard set of inputs and outputs with the capability of integrating with other drive boards, enhancing replacement of the standard I/O with a variety of options. The Allen-Bradley 1336-BDB-SP3E Drive Board is equipped with a hazard of personal injury from automatic restart consisting of 2-wire control. The 2-wire control uses a maintained run contacts that act as both runs (closed) and stop (open) devices.

Opening the stop contact will stop the Allen-Bradley 1336-BDB-SP3E Drive Board. If the run contact is closed, any fault will be reset, and if a valid start command is still present, the Allen-Bradley 1336-BDB-SP3E Drive Board will restart. When the L option board of the Allen-Bradley 1336-BDB-SP3E Drive Board is installed, the standard adapter board jumpers should be removed and the proper input mode selected. When the L option board is removed, the jumpers must be reinstalled, and the input mode parameter should be programmed to 1. The control interface option provides a means for interfacing various signals and commands to the Allen-Bradley 1336-BDB-SP3E Drive Board by using contact closures.