Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PCB Boards 1336-BDB-SP50A

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-BDB-SP50A

|
Need a Specific Revision?

The 1336-BDB-SP50A board belongs to the Allen-Bradley Bulletin 1336 drives. This unit is a PCB gate driver board and a spare part for 1336 Plus, Plus II, Impact, and Force drives.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-BDB-SP50A

ManufacturerAllen Bradley
Product TypeSpare part
Product Line1336 PCB Boards
Part Number1336-BDB-SP50A
Weight5.00 lbs (2.27 kg)
Product FamilyAdjustable Frequency Drives
Bulletin Number1336
Assembly LevelLevel 1; Major Assembly
Alternate Part Number1336-BDB-SP50D
DescriptionGate Driver PCB
Compatible DrivesPlus (S), Plus II (F), Impact (E) and Force (T)
Voltage575V AC
Frequency50 - 60 Hz
Power Rating600 HP
Temperature Range0-60 degrees Celsius
Frame TypeG
No. of kits required per drive1
RevisionA
Troubleshooting guide part codeBASEDRV / PWRSPLY
Troubleshooting guide nameBase Driver Board
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-BDB-SP50A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP50A units instead of migration.

Request a Repair

The 1336-BDB-SP50A board is a spare part for the Allen-Bradley Bulletin 1336 family of adjustable frequency drives. This unit is a PCB gate drive board that is compatible for use with the 1336 Plus (S), Plus II (F), Force (T), and Impact (E) drives. The 1336-BDB-SP50A board can be used with a voltage rating of 575 Volts AC and it comes with a 600 Horsepower output power rating. The normal operating frequency of the PCB is 50 to 60 Hertz. Installed between the main control board and chassis, the gate drive turns the IGBT brake on and off and it supplies power to the main control and isolation boards in the drive. The drive has a dedicated gate drive board mounting plate for easy maintenance and removal.

The 1336-BDB-SP50A board connects to the mainboard by using jumper wires and ribbon cable. The input and output power connections to other boards and circuitry are made through terminal block TB1 on the gate drive board for drives with Frame Size B that are rated at 1 to 15 Horsepower and 240 Volts, 1 to 30 Horsepower and 380 Volts. or 1 to 20 Horsepower and 600 Volts. Drives with higher Horsepower ratings and frame sizes C, D, E, G, and H, TB1 terminal blocks are located on the bottom of the drive where both the input and output power connections are to be made. During the uninstallation of the 1336-BDB-SP50A board, the driver board mounting plate must be removed first.  Ensure that the lockout power is disconnected from the drive before disassembly. Verify the presence of voltage by measuring the +DC and -DC values on terminal block TB1. Initiate drive service only when the bus voltage has been discharged to 0 Volts.