1336-BDB-SP51C | Allen Bradley Drives 1336 PCB Boards

1336-BDB-SP51C

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-BDB-SP51C

Description: The 1336-BDB-SP51C Gate Drive Board is a 1336 series spare part from Allen-Bradley/Rockwell Automation. It comes with a Size G frame, a 460 Volts voltage rating, a 500 Horsepower output power rating, and 3 pounds of weight.
Available Now
Request a quote for 1336-BDB-SP51C

Description:

The 1336-BDB-SP51C Gate Drive Board is a 1336 series spare part from Allen-Bradley/Rockwell Automation. It comes with a Size G frame, a 460 Volts voltage rating, a 500 Horsepower output power rating, and 3 pounds of weight.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-BDB-SP51C.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 1336-BDB-SP51C

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-BDB-SP51C
Product Description Gate Drive Board
TypePCB
Frame Designation G
Voltage Rating 460 Volts
Horsepower Rating 500 Horsepower
Drive Compatibility 1336 PLUS I / PLUS II
Weight (approx.) 3 Pounds
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP51C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP51C units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-BDB-SP51C
Product Description Gate Drive Board
TypePCB
Frame Designation G
Voltage Rating 460 Volts
Horsepower Rating 500 Horsepower
Drive Compatibility 1336 PLUS I / PLUS II
Weight (approx.) 3 Pounds
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP51C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP51C units instead of migration.

s

About 1336-BDB-SP51C

The 1336-BDB-SP51C Gate Drive Board is a 1336 series spare part from Allen-Bradley/Rockwell Automation. It is a printed circuit board that comes with a Size G frame, a 460 Volts AC voltage rating, 500 Horsepower of output power, and a net weight of 3 pounds. This gate drive board is compatible with the 1336 PLUS I and PLUS II series adjustable frequency drives. The 1336-BDB-SP51C Gate Drive Board is a power amplifier board that accepts low power input from the controller and produces a high current drive input. It can also provide fault protection to the IGBT in the circuit. This gate drive board is designed for work with AC drives.



 



The 1336-BDB-SP51C Gate Drive Board enhances the driving and switching of IGBTs. It provides the total control to power semiconductor applications. By using this gate drive board, the master SCR bus supply of the host drive can be reconfigured as a slave SCR bus supply. To achieve this, simply connect a cable from the gate drive board connector labeled Connector X4 to the new master SCR or connect the board through Connector X6 to another slave SCR. In this situation, the pre-charge board does not need to be removed from the converted SCR bus supply. It incorporates the isolated power supply and protection features needed for reliable and safe operation at the power stage. The 1336-BDB-SP51C printed circuit board must be mounted with the main controller board of the drive. It is supplied as an assembly kit for installation with the drive board and factory supplied screws. During maintenance, make sure to remove the gate drive board carefully from the main control board to avoid hazards. The installation and removal processes of this drive board must be performed by adequately trained technicians.



Repair Services for 1336-BDB-SP51C

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP51C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1336-BDB-SP51C

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-BDB-SP51C

Resolutions For 1336-BDB-SP51C

About

Technical Specifications for 1336-BDB-SP51C

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-BDB-SP51C
Product Description Gate Drive Board
TypePCB
Frame Designation G
Voltage Rating 460 Volts
Horsepower Rating 500 Horsepower
Drive Compatibility 1336 PLUS I / PLUS II
Weight (approx.) 3 Pounds
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-BDB-SP51C
Product Description Gate Drive Board
TypePCB
Frame Designation G
Voltage Rating 460 Volts
Horsepower Rating 500 Horsepower
Drive Compatibility 1336 PLUS I / PLUS II
Weight (approx.) 3 Pounds
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP51C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP51C units instead of migration.

About 1336-BDB-SP51C

The 1336-BDB-SP51C Gate Drive Board is a 1336 series spare part from Allen-Bradley/Rockwell Automation. It is a printed circuit board that comes with a Size G frame, a 460 Volts AC voltage rating, 500 Horsepower of output power, and a net weight of 3 pounds. This gate drive board is compatible with the 1336 PLUS I and PLUS II series adjustable frequency drives. The 1336-BDB-SP51C Gate Drive Board is a power amplifier board that accepts low power input from the controller and produces a high current drive input. It can also provide fault protection to the IGBT in the circuit. This gate drive board is designed for work with AC drives.



 



The 1336-BDB-SP51C Gate Drive Board enhances the driving and switching of IGBTs. It provides the total control to power semiconductor applications. By using this gate drive board, the master SCR bus supply of the host drive can be reconfigured as a slave SCR bus supply. To achieve this, simply connect a cable from the gate drive board connector labeled Connector X4 to the new master SCR or connect the board through Connector X6 to another slave SCR. In this situation, the pre-charge board does not need to be removed from the converted SCR bus supply. It incorporates the isolated power supply and protection features needed for reliable and safe operation at the power stage. The 1336-BDB-SP51C printed circuit board must be mounted with the main controller board of the drive. It is supplied as an assembly kit for installation with the drive board and factory supplied screws. During maintenance, make sure to remove the gate drive board carefully from the main control board to avoid hazards. The installation and removal processes of this drive board must be performed by adequately trained technicians.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP51C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP51C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF