DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDB-SP52D. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP52D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP52D units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP52D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP52D units instead of migration.
sThe 1336-BDB-SP52D is a PCB Gate Drive Board manufactured by Allen-Bradley. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board features 575 Volts AC, 500 Horsepower output and a plug-in option card that is the L option which provides control inputs to the Allen-Bradley 1336-BDB-SP52D Gate Drive Board. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be configured to use an analog speed follower or preset speed module. Also, the Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be controlled by using a communication network. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board two-wire control is a run forward/run reverse mechanism.
A ground fault occurs typically when the Allen-Bradley 1336-BDB-SP52D Gate Drive Board input ground current exceeds the threshold set in Ground Fault Level on Port 11 for five-line cycles. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board interface board is jumper-selectable to accept a 5V TTL or 12 Volts DC square-wave with a minimum high-state voltage of 3.0 Volts DC (TTL) or 7.0 Volts DC (12-volt encoder). To prevent the Allen-Bradley 1336-BDB-SP52D Gate Drive Board damage, the users should not exceed the Allen-Bradley 1336-BDB-SP52D Gate Drive Board’s stated voltage. When the Allen-Bradley 1336-BDB-SP52D Gate Drive Board user utilizes encoder connections or communications cables, the wiring should be separated from the power cabling by separating the wiring/cabling and by using carefully routed and shielded cable or a separate steel conduit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP52D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP52D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP52D Ser A
|
1336-BDB-SP52D/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP52D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP52D units instead of migration.
The 1336-BDB-SP52D is a PCB Gate Drive Board manufactured by Allen-Bradley. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board features 575 Volts AC, 500 Horsepower output and a plug-in option card that is the L option which provides control inputs to the Allen-Bradley 1336-BDB-SP52D Gate Drive Board. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be configured to use an analog speed follower or preset speed module. Also, the Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be controlled by using a communication network. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board two-wire control is a run forward/run reverse mechanism.
A ground fault occurs typically when the Allen-Bradley 1336-BDB-SP52D Gate Drive Board input ground current exceeds the threshold set in Ground Fault Level on Port 11 for five-line cycles. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board interface board is jumper-selectable to accept a 5V TTL or 12 Volts DC square-wave with a minimum high-state voltage of 3.0 Volts DC (TTL) or 7.0 Volts DC (12-volt encoder). To prevent the Allen-Bradley 1336-BDB-SP52D Gate Drive Board damage, the users should not exceed the Allen-Bradley 1336-BDB-SP52D Gate Drive Board’s stated voltage. When the Allen-Bradley 1336-BDB-SP52D Gate Drive Board user utilizes encoder connections or communications cables, the wiring should be separated from the power cabling by separating the wiring/cabling and by using carefully routed and shielded cable or a separate steel conduit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP52D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP52D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP52D such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP52D Ser A
|
1336-BDB-SP52D/A, Series A, Rev A | Request Quote |