DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen Bradley 1336-BDB-SP72C module is a spare part module from the 1336 series. It is a Gate Drive PCB with a voltage rating of 460 Volts. It has a rated power of 250 Horsepower.
The Allen Bradley 1336-BDB-SP72C module is a spare part module from the 1336 series. It is a Gate Drive PCB with a voltage rating of 460 Volts. It has a rated power of 250 Horsepower.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-BDB-SP72C. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Board |
Part Number | 1336-BDB-SP72C |
Description | Gate Drive PCB |
Voltage | 460 Volts AC |
Horsepower | 250 Horsepower |
Frame | F-Frame |
Weight | 3 Pounds |
Operating Frequency | 50 to 60 Hertz |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP72C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP72C units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Board |
Part Number | 1336-BDB-SP72C |
Description | Gate Drive PCB |
Voltage | 460 Volts AC |
Horsepower | 250 Horsepower |
Frame | F-Frame |
Weight | 3 Pounds |
Operating Frequency | 50 to 60 Hertz |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP72C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP72C units instead of migration.
sThe 1336-BDB-SP72C PCB is a spare part for the 1336 adjustable frequency drives that is designed and manufactured by Allen-Bradley. This spare part is a gate drive PCB for the Allen-Bradley adjustable frequency drive. It is fully compatible with the Allen-Bradley 1336 Plus, Force, and Impact drive series. This PCB comes with a voltage rating of 460 Volts AC. It has a power rating of 250 Horsepower. The normal operating frequency of the PCB board ranges from 50 to 60 Hertz. The gate drive PCB is a power amplifier device that converts a lower power input into high current drive input that is used for the IGBT braking system. The 1336-BDB-SP72C PCB is connected to the mainboard by using jumper connectors. The PCB gate board is usually attached to the main circuit board.
The Allen-Bradley 1336-BDB-SP72C PCB is equipped with different expansion slots. During the installation of the PCB board, the drive should be disconnected from its power source and properly earthed. The neon indicator which provides a visual indication of the presence of the bus voltage in the PCB should be fully turned off before disassembling the drive. All the bus bars, wires, and drive components should be properly removed during the installation of the PCB. The 1336-BDB-SP72C PCB should only be operated within a temperature range between 0 and 60 degrees Celsius. The board should be protected against electrostatic discharge that is generated by static electricity because it can damage the semiconductor device on the PCB.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP72C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP72C such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP72C Ser A
|
1336-BDB-SP72C/A, Series A, Rev A | Request Quote |
1336-BDB-SP72C Ser B
|
1336-BDB-SP72C/B, Series B, Rev B | Request Quote |
1336-BDB-SP72C Ser C
|
1336-BDB-SP72C/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Board |
Part Number | 1336-BDB-SP72C |
Description | Gate Drive PCB |
Voltage | 460 Volts AC |
Horsepower | 250 Horsepower |
Frame | F-Frame |
Weight | 3 Pounds |
Operating Frequency | 50 to 60 Hertz |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Board |
Part Number | 1336-BDB-SP72C |
Description | Gate Drive PCB |
Voltage | 460 Volts AC |
Horsepower | 250 Horsepower |
Frame | F-Frame |
Weight | 3 Pounds |
Operating Frequency | 50 to 60 Hertz |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-BDB-SP72C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP72C units instead of migration.
The 1336-BDB-SP72C PCB is a spare part for the 1336 adjustable frequency drives that is designed and manufactured by Allen-Bradley. This spare part is a gate drive PCB for the Allen-Bradley adjustable frequency drive. It is fully compatible with the Allen-Bradley 1336 Plus, Force, and Impact drive series. This PCB comes with a voltage rating of 460 Volts AC. It has a power rating of 250 Horsepower. The normal operating frequency of the PCB board ranges from 50 to 60 Hertz. The gate drive PCB is a power amplifier device that converts a lower power input into high current drive input that is used for the IGBT braking system. The 1336-BDB-SP72C PCB is connected to the mainboard by using jumper connectors. The PCB gate board is usually attached to the main circuit board.
The Allen-Bradley 1336-BDB-SP72C PCB is equipped with different expansion slots. During the installation of the PCB board, the drive should be disconnected from its power source and properly earthed. The neon indicator which provides a visual indication of the presence of the bus voltage in the PCB should be fully turned off before disassembling the drive. All the bus bars, wires, and drive components should be properly removed during the installation of the PCB. The 1336-BDB-SP72C PCB should only be operated within a temperature range between 0 and 60 degrees Celsius. The board should be protected against electrostatic discharge that is generated by static electricity because it can damage the semiconductor device on the PCB.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP72C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-BDB-SP72C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-BDB-SP72C such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-BDB-SP72C Ser A
|
1336-BDB-SP72C/A, Series A, Rev A | Request Quote |
1336-BDB-SP72C Ser B
|
1336-BDB-SP72C/B, Series B, Rev B | Request Quote |
1336-BDB-SP72C Ser C
|
1336-BDB-SP72C/C, Series C, Rev C | Request Quote |