1336-BDB-SP85D | Allen Bradley Drives 1336 PCB Boards

1336-BDB-SP85D

Rated 4.9 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-BDB-SP85D

Revisions: Ser A 
Description: The Allen-Bradley 1336-BDB-SP85D 1336F PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336F 480V 600HP J FRAME 1336F Force Drive that is used for amplifying the low input current from the 1336F Drive power supply module connected to the drive’s main control board. The PCB Gate Driver is located below the main control board, and it has 5 jumper connectors (J2, J7, J8, J9, J10, and J13) for electrical connection. It has 3 terminal strips (T4, T6, and T7), with the TB4 terminal strip used for 24V DC auxiliary input, and the TB7 for connection to jumper connector on the drive’s main control board. read more...
Available Now
Request a quote for 1336-BDB-SP85D

Description: The Allen-Bradley 1336-BDB-SP85D 1336F PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336F 480V 600HP J FRAME 1336F Force Drive that is used for amplifying the low input current from the 1336F Drive power supply module connected to the drive’s main control board. The PCB Gate Driver is located below the main control board, and it has 5 jumper connectors (J2, J7, J8, J9, J10, and J13) for electrical connection. It has 3 terminal strips (T4, T6, and T7), with the TB4 terminal strip used for 24V DC auxiliary input, and the TB7 for connection to jumper connector on the drive’s main control board. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-BDB-SP85D.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 5 reviews

    Technical Specifications for 1336-BDB-SP85D

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP85D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP85D units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP85D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP85D units instead of migration.

s

About 1336-BDB-SP85D

The Allen-Bradley 1336-BDB-SP85D 1336F PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336F 480V 600HP J FRAME 1336F Force Drive that is used for amplifying the low input current from the 1336F Drive power supply module connected to the drive’s main control board. The PCB Gate Driver is located below the main control board, and it has 5 jumper connectors (J2, J7, J8, J9, J10, and J13) for electrical connection. It has 3 terminal strips (T4, T6, and T7), with the TB4 terminal strip used for 24V DC auxiliary input, and the TB7 for connection to jumper connector on the drive’s main control board. It uses the TB6 terminal block for high voltage auxiliary input, and it is installed close to the main control board, via 8 fastened standoff screws, with 26 lb-in (3N-m) fastener torque.





Like other 1336 gate driver boards, the Allen-Bradley 1336-BDB-SP85D is customizable. Users can choose from dozens of optional features to create a gate driver board that suits all of their specific industrial needs. The 1336-BDB-SP85D is protected inside a NEMA, 1, 4, or 12 enclosure, and the enclosure can use accessories like floor stands, gaskets and filters, filtered door openings, and locally or remotely powered heaters. Users can also have their gate driver board enclosures painted in 1, 2, or 3 custom colors and labeled with an enclosure nameplate.





The 1336-BDB-SP85D’s has different RTD protection options, and these are 120 Ohm nickel, 10 Ohm copper, and 100 Ohm platinum RTD protection.



Technical Description of 1336-BDB-SP85D

Allen Bradley-PCB,GATE DRIVE,1336F,480V,600HP,J FRAME Adjustable Frequency Drive

Repair Services for 1336-BDB-SP85D

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP85D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336-BDB-SP85D

Please refer to the manual for more information about the 1336-BDB-SP85D such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-BDB-SP85D Ser A
1336-BDB-SP85D/A, Series A, Rev A Request Quote
Common misspellings:
  • l336-BDB-SP85D
  • 1336-8DB-SP85D
  • 1336-BD8-SP85D
  • 1336-BDB-SPb5D
  • 1336BDBSP85D

Dimensions For 1336-BDB-SP85D

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-BDB-SP85D

Resolutions For 1336-BDB-SP85D

About

Technical Specifications for 1336-BDB-SP85D

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-BDB-SP85D has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-BDB-SP85D units instead of migration.

About 1336-BDB-SP85D

The Allen-Bradley 1336-BDB-SP85D 1336F PCB Gate Driver Board is a gate driver board for the Allen-Bradley 1336F 480V 600HP J FRAME 1336F Force Drive that is used for amplifying the low input current from the 1336F Drive power supply module connected to the drive’s main control board. The PCB Gate Driver is located below the main control board, and it has 5 jumper connectors (J2, J7, J8, J9, J10, and J13) for electrical connection. It has 3 terminal strips (T4, T6, and T7), with the TB4 terminal strip used for 24V DC auxiliary input, and the TB7 for connection to jumper connector on the drive’s main control board. It uses the TB6 terminal block for high voltage auxiliary input, and it is installed close to the main control board, via 8 fastened standoff screws, with 26 lb-in (3N-m) fastener torque.





Like other 1336 gate driver boards, the Allen-Bradley 1336-BDB-SP85D is customizable. Users can choose from dozens of optional features to create a gate driver board that suits all of their specific industrial needs. The 1336-BDB-SP85D is protected inside a NEMA, 1, 4, or 12 enclosure, and the enclosure can use accessories like floor stands, gaskets and filters, filtered door openings, and locally or remotely powered heaters. Users can also have their gate driver board enclosures painted in 1, 2, or 3 custom colors and labeled with an enclosure nameplate.





The 1336-BDB-SP85D’s has different RTD protection options, and these are 120 Ohm nickel, 10 Ohm copper, and 100 Ohm platinum RTD protection.



Technical Description of 1336-BDB-SP85D

Allen Bradley-PCB,GATE DRIVE,1336F,480V,600HP,J FRAME Adjustable Frequency Drive
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP85D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-BDB-SP85D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336-BDB-SP85D such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336-BDB-SP85D Ser A
1336-BDB-SP85D/A, Series A, Rev A Request Quote

Common misspellings:
  • l336-BDB-SP85D
  • 1336-8DB-SP85D
  • 1336-BD8-SP85D
  • 1336-BDB-SPb5D
  • 1336BDBSP85D
PDF