DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1336-PB-SP2A precharge PCB is fully compatible with the Allen-Bradley 1336 series of adjustable frequency AC drives. It reduces peak currents that could damage it and the drive.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-PB-SP2A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley/Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-PB-SP2A |
Description | Precharge PC Board |
Voltage | 460 Volts AC |
Horsepower | 40 to 60 Horsepower |
Frame Size | Frame C |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-PB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-PB-SP2A units instead of migration.
Brand | Allen-Bradley/Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-PB-SP2A |
Description | Precharge PC Board |
Voltage | 460 Volts AC |
Horsepower | 40 to 60 Horsepower |
Frame Size | Frame C |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-PB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-PB-SP2A units instead of migration.
sThe 1336-PB-SP2A board is a precharge circuit board from Allen-Bradley/Rockwell Automation. It is a precharge PCB or printed circuit board manufactured by Allen-Bradley as a spare part board for the 1336 series of variable frequency drives that are also manufactured by Allen-Bradley. The variable frequency drive converts AC input voltage into DC voltage, it adjusts the frequency of the input voltage, and then it again converts the DC voltage back to AC voltage which is used to control and regulate the torque and speed of different induction motors. These variable frequency drives are 3-phase devices. The 1336-PB-SP2A printed circuit board is mainly used to limit the inrush current when the input voltage is applied to the system. An initial high voltage flowing into the system may damage the internal components of the drive. This means that the Precharge printed circuit board limits the initial current and regulates it. This helps to protect the drive from electrical damage.
The Allen-Bradley 1336-PB-SP2A printed circuit board is installed on the main board of the drive by using the mounting screws located on the back of the board. It is easy to install and replace when needed. The temperature of the installation environment should be between 0 and 50 degrees Celsius for optimal operation. The 1336-PB-SP2A printed circuit board operates with an input voltage of 460 Volts AC and has an output power range of 40 to 60 Horsepower. The PCB has a C-Frame body. The frequency for operation ranges from 50 to 60 Hertz for regular operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-PB-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley/Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-PB-SP2A |
Description | Precharge PC Board |
Voltage | 460 Volts AC |
Horsepower | 40 to 60 Horsepower |
Frame Size | Frame C |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen-Bradley/Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-PB-SP2A |
Description | Precharge PC Board |
Voltage | 460 Volts AC |
Horsepower | 40 to 60 Horsepower |
Frame Size | Frame C |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-PB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-PB-SP2A units instead of migration.
The 1336-PB-SP2A board is a precharge circuit board from Allen-Bradley/Rockwell Automation. It is a precharge PCB or printed circuit board manufactured by Allen-Bradley as a spare part board for the 1336 series of variable frequency drives that are also manufactured by Allen-Bradley. The variable frequency drive converts AC input voltage into DC voltage, it adjusts the frequency of the input voltage, and then it again converts the DC voltage back to AC voltage which is used to control and regulate the torque and speed of different induction motors. These variable frequency drives are 3-phase devices. The 1336-PB-SP2A printed circuit board is mainly used to limit the inrush current when the input voltage is applied to the system. An initial high voltage flowing into the system may damage the internal components of the drive. This means that the Precharge printed circuit board limits the initial current and regulates it. This helps to protect the drive from electrical damage.
The Allen-Bradley 1336-PB-SP2A printed circuit board is installed on the main board of the drive by using the mounting screws located on the back of the board. It is easy to install and replace when needed. The temperature of the installation environment should be between 0 and 50 degrees Celsius for optimal operation. The 1336-PB-SP2A printed circuit board operates with an input voltage of 460 Volts AC and has an output power range of 40 to 60 Horsepower. The PCB has a C-Frame body. The frequency for operation ranges from 50 to 60 Hertz for regular operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-PB-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-PB-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.