DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1336-RLOAD-SP2A board is a spare part kit containing a 6.8-kiloohm load resistor which is compatible with Allen-Bradley 1336 PLUS, PLUS II, FORCE and IMPACT drives.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-RLOAD-SP2A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-RLOAD-SP2A |
Product type | Load resistor |
Resistance | 6.8 kiloohms |
Drive compatibility | 1336 PLUS, PLUS II, FORCE and IMPACT |
Voltage | 230, 460, 575 Volts AC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-RLOAD-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-RLOAD-SP2A units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-RLOAD-SP2A |
Product type | Load resistor |
Resistance | 6.8 kiloohms |
Drive compatibility | 1336 PLUS, PLUS II, FORCE and IMPACT |
Voltage | 230, 460, 575 Volts AC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-RLOAD-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-RLOAD-SP2A units instead of migration.
sThe Allen-Bradley 1336-RLOAD-SP2A board is a spare part kit containing a 6.8-kiloohm load resistor which is compatible with Allen-Bradley 1336 PLUS, PLUS II, FORCE, and IMPACT drives. The 1336-RLOAD-SP2A board can be used as a load resistor with 230 Volts AC rated 1336 PLUS, PLUS II, FORCE, and IMPACT drives which have output power ratings in the 7.5 to 30 Horsepower range. One 1336-RLOAD-SP2A spare part kit is required for each of the compatible Frame B and Frame C drives. The 1336-RLOAD-SP2A board can also be used with a 460 Volts AC rated Frame B and Frame C drives from the 1336 PLUS, FORCE, and IMPACT drive families which have output power ratings in the 7.5 to 20 Horsepower range. For 460 Volts AC rated 1336 PLUS II drives, the 1336-RLOAD-SP2A board can be used with 15 to 20 Horsepower output rated drives.
Additionally, the 1336-RLOAD-SP2A board can be used with 575 Volts AC rated drives from the 1336 FORCE, IMPACT, and PLUS drive families which are rated for 7.5 to 60 Horsepower. In this case, 2 spare part kits are needed for each Frame C drive. AC drives such as the 1336 drive from Allen-Bradley should only be installed by trained and experienced technicians so that proper installation is ensured which would prevent any equipment damage or injury. The 1336 drives contain ESD-sensitive components and therefore ESD precautions should be followed. To prevent electric shock, the bus capacitors on the drives should be discharged before any work is performed on the drives. The DC bus voltage can be measured on the terminals that are provided for this purpose on the TB1 terminal block.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-RLOAD-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-RLOAD-SP2A |
Product type | Load resistor |
Resistance | 6.8 kiloohms |
Drive compatibility | 1336 PLUS, PLUS II, FORCE and IMPACT |
Voltage | 230, 460, 575 Volts AC |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 1336-RLOAD-SP2A |
Product type | Load resistor |
Resistance | 6.8 kiloohms |
Drive compatibility | 1336 PLUS, PLUS II, FORCE and IMPACT |
Voltage | 230, 460, 575 Volts AC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-RLOAD-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-RLOAD-SP2A units instead of migration.
The Allen-Bradley 1336-RLOAD-SP2A board is a spare part kit containing a 6.8-kiloohm load resistor which is compatible with Allen-Bradley 1336 PLUS, PLUS II, FORCE, and IMPACT drives. The 1336-RLOAD-SP2A board can be used as a load resistor with 230 Volts AC rated 1336 PLUS, PLUS II, FORCE, and IMPACT drives which have output power ratings in the 7.5 to 30 Horsepower range. One 1336-RLOAD-SP2A spare part kit is required for each of the compatible Frame B and Frame C drives. The 1336-RLOAD-SP2A board can also be used with a 460 Volts AC rated Frame B and Frame C drives from the 1336 PLUS, FORCE, and IMPACT drive families which have output power ratings in the 7.5 to 20 Horsepower range. For 460 Volts AC rated 1336 PLUS II drives, the 1336-RLOAD-SP2A board can be used with 15 to 20 Horsepower output rated drives.
Additionally, the 1336-RLOAD-SP2A board can be used with 575 Volts AC rated drives from the 1336 FORCE, IMPACT, and PLUS drive families which are rated for 7.5 to 60 Horsepower. In this case, 2 spare part kits are needed for each Frame C drive. AC drives such as the 1336 drive from Allen-Bradley should only be installed by trained and experienced technicians so that proper installation is ensured which would prevent any equipment damage or injury. The 1336 drives contain ESD-sensitive components and therefore ESD precautions should be followed. To prevent electric shock, the bus capacitors on the drives should be discharged before any work is performed on the drives. The DC bus voltage can be measured on the terminals that are provided for this purpose on the TB1 terminal block.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-RLOAD-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-RLOAD-SP2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.