1336-SN-SP15A | Allen Bradley Drives 1336 PCB Boards

1336-SN-SP15A

Rated 4.8 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-SN-SP15A

Description: The Allen-Bradley 1336-SN-SP15A PCB inverter board is made for the 1336 Plus, Plus II, Impact, and Force AC drives. It is compatible with the G and H-frame 1336 drives with 575 Volts AC voltage ratings and 300 to 800 Horsepower output power ratings.
Available Now
Request a quote for 1336-SN-SP15A

Description:

The Allen-Bradley 1336-SN-SP15A PCB inverter board is made for the 1336 Plus, Plus II, Impact, and Force AC drives. It is compatible with the G and H-frame 1336 drives with 575 Volts AC voltage ratings and 300 to 800 Horsepower output power ratings.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-SN-SP15A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 8 reviews

    Technical Specifications for 1336-SN-SP15A

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-SN-SP15A PCB
DescriptionPCB Inverter Snubber Board
Voltage575 Volts AC
Power Rating300 to 800 Horsepower
FrameG and H
Units of Kits per Drive3
Location Within The DriveIn the input rectifier snubber board
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2” trouble-shooting guide
Series1336 PCB Boards
Operating Temperature0 to 50 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SN-SP15A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SN-SP15A units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-SN-SP15A PCB
DescriptionPCB Inverter Snubber Board
Voltage575 Volts AC
Power Rating300 to 800 Horsepower
FrameG and H
Units of Kits per Drive3
Location Within The DriveIn the input rectifier snubber board
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2” trouble-shooting guide
Series1336 PCB Boards
Operating Temperature0 to 50 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SN-SP15A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SN-SP15A units instead of migration.

s

About 1336-SN-SP15A

The Allen-Bradley 1336-SN-SP15A PCB inverter snubber board is a PCB (Printed Circuit Board) inverter snubber assembly for the 1336 Impact, Plus, Force, and Plus II AC drives. This inverter snubber is found within the input rectifier snubber board located on the inverter assembly between the heatsink and the vertical Bus and on the power module snubber board located on the heatsink at the rear-end of the inverter bay. The 1336-SN-SP15A PCB is shipped as a spare part assembly comprising 3 inverter snubbers and an installation kit that includes fastening screws and mounting plate. This snubber board is compatible with the G and H frames 1336 Plus, Plus II, Impact, and Force drives with 300 to 800 Horsepower output ratings and 575 Volts AC operating voltage ratings.



 



The 1336-SN-SP15A snubber PCB is installed on the power module and input rectifier snubber board by removing power from the drive and checking for zero Volts at the –DC and +DC brake terminals and the absence of control voltage at the –V and +V terminals on the main control board. Detach the jumper connectors (J1 and J2) on the snubber board, and remove the fasting screws holding the snubber board to the bracket. Replace the old or damaged snubber with the new 1336-SN-SP15A snubber and fasten the snubber board back to the bracket. Attach the jumper connectors and re-attach the circuit platform. Check online resources such as the 1336 IMPACT-6.2, 1336 FORCE-6.2, or the 1336 PLUS-6.2 trouble-shooting guides for more information on how to install and remove the 1336-SN-SP15A PCB snubber board safely.



Repair Services for 1336-SN-SP15A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SN-SP15A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1336-SN-SP15A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-SN-SP15A

Resolutions For 1336-SN-SP15A

About

Technical Specifications for 1336-SN-SP15A

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-SN-SP15A PCB
DescriptionPCB Inverter Snubber Board
Voltage575 Volts AC
Power Rating300 to 800 Horsepower
FrameG and H
Units of Kits per Drive3
Location Within The DriveIn the input rectifier snubber board
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2” trouble-shooting guide
Series1336 PCB Boards
Operating Temperature0 to 50 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number1336-SN-SP15A PCB
DescriptionPCB Inverter Snubber Board
Voltage575 Volts AC
Power Rating300 to 800 Horsepower
FrameG and H
Units of Kits per Drive3
Location Within The DriveIn the input rectifier snubber board
Documentation1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2” trouble-shooting guide
Series1336 PCB Boards
Operating Temperature0 to 50 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-SN-SP15A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-SN-SP15A units instead of migration.

About 1336-SN-SP15A

The Allen-Bradley 1336-SN-SP15A PCB inverter snubber board is a PCB (Printed Circuit Board) inverter snubber assembly for the 1336 Impact, Plus, Force, and Plus II AC drives. This inverter snubber is found within the input rectifier snubber board located on the inverter assembly between the heatsink and the vertical Bus and on the power module snubber board located on the heatsink at the rear-end of the inverter bay. The 1336-SN-SP15A PCB is shipped as a spare part assembly comprising 3 inverter snubbers and an installation kit that includes fastening screws and mounting plate. This snubber board is compatible with the G and H frames 1336 Plus, Plus II, Impact, and Force drives with 300 to 800 Horsepower output ratings and 575 Volts AC operating voltage ratings.



 



The 1336-SN-SP15A snubber PCB is installed on the power module and input rectifier snubber board by removing power from the drive and checking for zero Volts at the –DC and +DC brake terminals and the absence of control voltage at the –V and +V terminals on the main control board. Detach the jumper connectors (J1 and J2) on the snubber board, and remove the fasting screws holding the snubber board to the bracket. Replace the old or damaged snubber with the new 1336-SN-SP15A snubber and fasten the snubber board back to the bracket. Attach the jumper connectors and re-attach the circuit platform. Check online resources such as the 1336 IMPACT-6.2, 1336 FORCE-6.2, or the 1336 PLUS-6.2 trouble-shooting guides for more information on how to install and remove the 1336-SN-SP15A PCB snubber board safely.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SN-SP15A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-SN-SP15A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF